AnsweredMC7 won't step record with the virtual controller?

Author
Post
Essentials Only Full Version
knetknight
Max Output Level: -90 dBFS
  • Total Posts : 3
  • Joined: 2016/02/13 18:59:05
  • Status: offline
2016/02/19 14:16:38 (permalink)

MC7 won't step record with the virtual controller?

Hello. I'm not new to sequencing but I am new to using Music Creator so I've been experimenting with it the last couple of days to get familiar with and I'm having an issue with Step Record. I followed the directions and get to the step record dialog, in basic mode as seen in screenshot below. As you can see in the screenshot during a keypress, I trigger a note on the virtual controller and hear it play, and the track level meter spikes green in response, but the step recorder doesn't acknowledge or auto-advance like I would expect it to in this scenario. Is the Virtual Controller not capable of feeding Step Record or am I perhaps missing something right in front of my face? I just thought it might be a handy way to work on simple rhythms and patterns when I'm travelling and don't have a physical controller connected.
 
Thoughts? thanks.
 

post edited by knetknight - 2016/02/19 14:32:24
#1
See best answer

4 Replies Related Threads
    scook
    Forum Host
    • Total Posts : 24146
    • Joined: 2005/07/27 13:43:57
    • Location: TX
    • Status: offline
    Re: MC7 won't step record with the virtual controller? 2016/02/19 15:06:05 (permalink) ☼ Best Answerby knetknight 2016/02/20 00:31:46
    Yes, it appears step record does not like using the virtual controller directly as an input.
     
    I was able to use the virtual controller doing the following:
    • Add a MIDI track with the input set to the virtual controller omni and the output set to LoopBe1 omni.
    • Add an instrument track with the input set to LoopBe1 omni
    • Enable input echo on both tracks
    • Enable step recording
    • Record
    Any virtual MIDI cable should work. LoopBe1 and LoopMIDI are free. Install one of them and enable the input/output for the virtual cable in MC MIDI device preferences.
    #2
    knetknight
    Max Output Level: -90 dBFS
    • Total Posts : 3
    • Joined: 2016/02/13 18:59:05
    • Status: offline
    Re: MC7 won't step record with the virtual controller? 2016/02/19 18:30:44 (permalink)
    Thanks scook. Maybe I'm doing something wrong but each time I try that I get the following error and then loopbe1 mutes itself.
     

     
    Kind Regards
    #3
    scook
    Forum Host
    • Total Posts : 24146
    • Joined: 2005/07/27 13:43:57
    • Location: TX
    • Status: offline
    Re: MC7 won't step record with the virtual controller? 2016/02/19 19:12:02 (permalink)
    It is pretty easy to create a feedback loop which will throw that message. It can be the result of using MIDI "All Inputs" settings. Did you try the above example in a new project?
    #4
    knetknight
    Max Output Level: -90 dBFS
    • Total Posts : 3
    • Joined: 2016/02/13 18:59:05
    • Status: offline
    Re: MC7 won't step record with the virtual controller? 2016/02/20 00:15:05 (permalink)
    Thanks scook, that did it. I must've just goofed something earlier because I just started over from scratch and I'd swear I set it up the same way as last time except, you know, now it works and all :-p
     
    Time to tinker!
    post edited by knetknight - 2016/02/20 00:29:42
    #5
    Jump to:
    © 2024 APG vNext Commercial Version 5.1