joyof60
Max Output Level: -85 dBFS
- Total Posts : 283
- Joined: 2013/10/08 09:13:28
- Location: Louisiana
- Status: offline
AD@ MIDI audio fallout every 5th bar?
SPLAT, recent upgrade, ( I forget the name), prolly not an upgrade problem as all has been somewhat well. Placed an AD2 track as always, but I have every 5th measure or so silent. I have tried other beats, and other kits, this is just weird. Nothing in the event lis that is strange, all the MIDI notes are there in PRV. The AD midi meter still jumps but the audio meter stops as does the drum sound from that particular track. All other tracks, analog and midi all are fine, just the AD2 track. Anybody seen this before? Any Ideas?
Joyof60 Sonar Plat., Windows 10 Pro (64bit), Custom Build, AMD Rizen 5 @3.95GHz, Assorted HDDs, 32 Gb G.Skill RAM. Focusrite Scarlett 18i20, Roland FA08, coupla guitars and misc. mics, cans, and gadgetry.
|
joyof60
Max Output Level: -85 dBFS
- Total Posts : 283
- Joined: 2013/10/08 09:13:28
- Location: Louisiana
- Status: offline
Re: AD@ MIDI audio fallout every 5th bar?
2016/03/10 05:00:49
(permalink)
Ok, none of my old projects are affected, and this does not happen within a new project. I could redo the whole thing but I'd like to know what I did to make this happen so it doesn't happen again.
Joyof60 Sonar Plat., Windows 10 Pro (64bit), Custom Build, AMD Rizen 5 @3.95GHz, Assorted HDDs, 32 Gb G.Skill RAM. Focusrite Scarlett 18i20, Roland FA08, coupla guitars and misc. mics, cans, and gadgetry.
|
thomasabarnes
Max Output Level: -43 dBFS
- Total Posts : 3234
- Joined: 2003/11/11 03:19:17
- Location: Milwaukee, WI USA
- Status: offline
Re: AD@ MIDI audio fallout every 5th bar?
2016/03/10 06:38:19
(permalink)
Try resaving the project with a new name, and, then open the new named project to see if the problem went away?
 "It's not a song till it touches your heart. It's not a song till it tears you apart!" Lyrics of Amy Grant. SONAR Platinum X64 (jBridge), Windows 10 Pro 64-Bit, Core i7 990X Extreme Edition Processor 3.46 GHz 6 Cores, Gigabyte EX58-UD5, Crucial Ballistix 24GB 1333MHz DDR3 @1333 MHz, TASCAM UH-7000, Behringer X-Touch, EVGA GTX 980TI Superclocked 6GB, 1TB Samsung EVO 850 SSD, 150GB, 320GB, 1TB 7200rpm HDDs
|
brundlefly
Max Output Level: 0 dBFS
- Total Posts : 14250
- Joined: 2007/09/14 14:57:59
- Location: Manitou Spgs, Colorado
- Status: offline
Re: AD@ MIDI audio fallout every 5th bar?
2016/03/10 12:08:37
(permalink)
Raise the Prepare Using Buffer under Preferences > MIDI > Playback and Recording to 500ms if it's at the new default (since X1) of 250ms. If it's already there, try increasing it in increments of 50 or 100ms until the problem goes away.
The difference between the two projects may be tempo. Tempo and note placement can interact with the buffer size in a way that makes it necessary to raise the buffer even higher. I had one project that needed 550ms until I changed the tempo by .5 BPM. And sometimes just moving a single dropped note a tick or two will fix it.
250 is problematic for a lot of projects on a lot of systems regardless of tempo, and processing power does not seem to be a factor.
SONAR Platinum x64, 2x MOTU 2408/PCIe-424 (24-bit, 48kHz) Win10, I7-6700K @ 4.0GHz, 24GB DDR4, 2TB HDD, 32GB SSD Cache, GeForce GTX 750Ti, 2x 24" 16:10 IPS Monitors
|
ampfixer
Max Output Level: -20 dBFS
- Total Posts : 5508
- Joined: 2010/12/12 20:11:50
- Location: Ontario
- Status: offline
Re: AD@ MIDI audio fallout every 5th bar?
2016/03/10 14:16:30
(permalink)
It's a long shot, but are you using a plug in that's in demo mode? They often disrupt sound at regular intervals.
Regards, John I want to make it clear that I am an Eedjit. I have no direct, or indirect, knowledge of business, the music industry, forum threads or the meaning of life. I know about amps. WIN 10 Pro X64, I7-3770k 16 gigs, ASUS Z77 pro, AMD 7950 3 gig, Steinberg UR44, A-Pro 500, Sonar Platinum, KRK Rokit 6
|
joyof60
Max Output Level: -85 dBFS
- Total Posts : 283
- Joined: 2013/10/08 09:13:28
- Location: Louisiana
- Status: offline
Re: AD@ MIDI audio fallout every 5th bar?
2016/03/17 02:30:46
(permalink)
Thanks guys! Twas indeed a plug in, not in demo mode, just an LPEQ, used it so much before without problems, but I trashed it and the drop outs stopped. Thanks so much for all your input!!
Joyof60 Sonar Plat., Windows 10 Pro (64bit), Custom Build, AMD Rizen 5 @3.95GHz, Assorted HDDs, 32 Gb G.Skill RAM. Focusrite Scarlett 18i20, Roland FA08, coupla guitars and misc. mics, cans, and gadgetry.
|
joyof60
Max Output Level: -85 dBFS
- Total Posts : 283
- Joined: 2013/10/08 09:13:28
- Location: Louisiana
- Status: offline
Re: AD@ MIDI audio fallout every 5th bar?
2016/03/17 02:31:50
(permalink)
Hmmmm....not sure how to mark this solved...
Joyof60 Sonar Plat., Windows 10 Pro (64bit), Custom Build, AMD Rizen 5 @3.95GHz, Assorted HDDs, 32 Gb G.Skill RAM. Focusrite Scarlett 18i20, Roland FA08, coupla guitars and misc. mics, cans, and gadgetry.
|
scook
Forum Host
- Total Posts : 24146
- Joined: 2005/07/27 13:43:57
- Location: TX
- Status: offline
Re: AD@ MIDI audio fallout every 5th bar?
2016/03/17 02:32:47
(permalink)
Edit the original post to modify the subject line
|