joden
Max Output Level: -65 dBFS
- Total Posts : 1263
- Joined: 9/22/2007
- Status: offline
Groove Quantise...no option to select clipboard?
Trying to create a groove quantise thing (SPLAT latest version), but there does not appear to be a "select clipboard" option in the Groove Quantise drop downs...the manual clearly states you can select the clipboard....
Can anyone advise further please?
Thanks
|
joden
Max Output Level: -65 dBFS
- Total Posts : 1263
- Joined: 9/22/2007
- Status: offline
Re: Groove Quantise...no option to select clipboard?
March 30, 16 6:26 PM
(permalink)
anyone? The manual clearly states this but gives no example of where or how it is loaded...
|
brundlefly
Max Output Level: 0 dBFS
- Total Posts : 14250
- Joined: 9/14/2007
- Location: Manitou Spgs, Colorado
- Status: offline
Re: Groove Quantise...no option to select clipboard?
March 30, 16 6:55 PM
(permalink)
<Clipboard> should be the default in the Groove File field of the Groove Quantize dialog (Process > Groove Quantize), and the clipboard is populated simply by copying the clip you want to use as the groove source.
SONAR Platinum x64, 2x MOTU 2408/PCIe-424 (24-bit, 48kHz) Win10, I7-6700K @ 4.0GHz, 24GB DDR4, 2TB HDD, 32GB SSD Cache, GeForce GTX 750Ti, 2x 24" 16:10 IPS Monitors
|
joden
Max Output Level: -65 dBFS
- Total Posts : 1263
- Joined: 9/22/2007
- Status: offline
Re: Groove Quantise...no option to select clipboard?
March 30, 16 10:03 PM
(permalink)
hmmm, thanks I could not see that? All I get is Cakewalk DNA Grooves.GRV?
|
brundlefly
Max Output Level: 0 dBFS
- Total Posts : 14250
- Joined: 9/14/2007
- Location: Manitou Spgs, Colorado
- Status: offline
Re: Groove Quantise...no option to select clipboard?
March 30, 16 10:21 PM
(permalink)
I think you must have an audio clip or some other content in your clipboard. You need to have MIDI in the clipboard to use it as a Groove Quantize reference.
SONAR Platinum x64, 2x MOTU 2408/PCIe-424 (24-bit, 48kHz) Win10, I7-6700K @ 4.0GHz, 24GB DDR4, 2TB HDD, 32GB SSD Cache, GeForce GTX 750Ti, 2x 24" 16:10 IPS Monitors
|
joden
Max Output Level: -65 dBFS
- Total Posts : 1263
- Joined: 9/22/2007
- Status: offline
Re: Groove Quantise...no option to select clipboard?
March 30, 16 10:45 PM
(permalink)
ahhh, yes I am using audio, but I read in the manual I could use an audio clip? Well at least I thought I did - I'll double check..
|
joden
Max Output Level: -65 dBFS
- Total Posts : 1263
- Joined: 9/22/2007
- Status: offline
Re: Groove Quantise...no option to select clipboard?
March 30, 16 10:49 PM
(permalink)
damn, I misread it - how do I get a midi file from an audio drum part... okay I'll need to investigate further. Thanks BF
|
brundlefly
Max Output Level: 0 dBFS
- Total Posts : 14250
- Joined: 9/14/2007
- Location: Manitou Spgs, Colorado
- Status: offline
Re: Groove Quantise...no option to select clipboard?
March 31, 16 3:07 AM
(permalink)
The short answer is enable Audiosnap, and click the Copy As MIDI button in the Audiosnap Palette. But you might need to do some massaging of the transient markers, depending on what's in the track.
Also, be aware that the current transient detection algorithm tends to place markers about 15ms late (30 ticks at 125BPM), so you might want to paste the copied MIDI into a track and slide it a little earlier before re-copying and using it as a Groove Quantize reference.
SONAR Platinum x64, 2x MOTU 2408/PCIe-424 (24-bit, 48kHz) Win10, I7-6700K @ 4.0GHz, 24GB DDR4, 2TB HDD, 32GB SSD Cache, GeForce GTX 750Ti, 2x 24" 16:10 IPS Monitors
|
joden
Max Output Level: -65 dBFS
- Total Posts : 1263
- Joined: 9/22/2007
- Status: offline
Re: Groove Quantise...no option to select clipboard?
March 31, 16 11:32 AM
(permalink)
Cool, thanks for the tips BF...I'll give that a go!
Cheers
|