sausy1981
Max Output Level: -83 dBFS
- Total Posts : 385
- Joined: 12/13/2013
- Location: Dublin, Ireland
- Status: offline
[Solved] Not able to access the early access?
Hi guys, anyone else unable to access the early access release. I followed the instructions but it's not showing up in either location. I also logged out and back in to CCC. edit: Added [Solved] - sc
post edited by scook - March 30, 16 6:24 PM
|
Sylvan
Max Output Level: -75 dBFS
- Total Posts : 793
- Joined: 4/14/2005
- Location: San Diego, CA-USA
- Status: offline
Re: Not able to access the early access?
March 30, 16 5:39 PM
(permalink)
We must have been posting at the same time. I did not see your post until I submitted mine. I am having the same issue.
SONAR Platinum RME Fireface UFX Tascam US 20X20 Tascam US 16X08 Intel i7-5830K LGA2011V3 (6 CORE) Asus X99-AII Corsair Vengeance DDR4 32GB Geeforce GTX 970 4GB
|
jps
Max Output Level: -85 dBFS
- Total Posts : 280
- Joined: 10/5/2007
- Location: NORWAY
- Status: offline
Re: Not able to access the early access?
March 30, 16 5:45 PM
(permalink)
|
cowboydan
Max Output Level: -72 dBFS
- Total Posts : 908
- Joined: 1/13/2012
- Location: Asperen, Netherlands
- Status: offline
Re: Not able to access the early access?
March 30, 16 5:49 PM
(permalink)
Is this the front runner to what we are to expect?.........................................................
|
Sylvan
Max Output Level: -75 dBFS
- Total Posts : 793
- Joined: 4/14/2005
- Location: San Diego, CA-USA
- Status: offline
Re: Not able to access the early access?
March 30, 16 5:52 PM
(permalink)
jps
Same here , O no :-)
I see what you did there. Well played.
SONAR Platinum RME Fireface UFX Tascam US 20X20 Tascam US 16X08 Intel i7-5830K LGA2011V3 (6 CORE) Asus X99-AII Corsair Vengeance DDR4 32GB Geeforce GTX 970 4GB
|
sausy1981
Max Output Level: -83 dBFS
- Total Posts : 385
- Joined: 12/13/2013
- Location: Dublin, Ireland
- Status: offline
Re: Not able to access the early access?
March 30, 16 5:53 PM
(permalink)
I don't think it's a big deal. Just hoping the issue wasn't exclusive to me. I'm sure we'll get it at some stage.
|
Andrew Rossa
Max Output Level: -56 dBFS
- Total Posts : 1910
- Joined: 4/14/2006
- Status: offline
Re: Not able to access the early access?
March 30, 16 5:54 PM
(permalink)
Should be there now. Please check again.
|
adrian.crossan
Max Output Level: -78 dBFS
- Total Posts : 647
- Joined: 11/5/2003
- Location: Liverpool, UK
- Status: offline
Re: Not able to access the early access?
March 30, 16 5:55 PM
(permalink)
Try logging out then back in again.
OK perhaps it was just a coincidence with timing...
|
sausy1981
Max Output Level: -83 dBFS
- Total Posts : 385
- Joined: 12/13/2013
- Location: Dublin, Ireland
- Status: offline
Re: Not able to access the early access?
March 30, 16 5:58 PM
(permalink)
Yes, It's there now Andrew. Thank you. Just a note for other users, I had to log out and then back into my CCC for it to show up.
|
scook
Forum Host
- Total Posts : 24146
- Joined: 7/27/2005
- Location: TX
- Status: offline
Re: Not able to access the early access?
March 30, 16 6:05 PM
(permalink)
I see the early access announcement has been modified to detail what is new in this release. Check it out. Marking this thread solved.
|
ampfixer
Max Output Level: -20 dBFS
- Total Posts : 5508
- Joined: 12/12/2010
- Location: Ontario
- Status: offline
Re: Not able to access the early access?
March 30, 16 7:33 PM
(permalink)
☄ Helpfulby rtucker55 March 30, 16 8:14 PM
It just looks like more stuff that nobody has asked for. Not sure what's going on this year.
Regards, John I want to make it clear that I am an Eedjit. I have no direct, or indirect, knowledge of business, the music industry, forum threads or the meaning of life. I know about amps. WIN 10 Pro X64, I7-3770k 16 gigs, ASUS Z77 pro, AMD 7950 3 gig, Steinberg UR44, A-Pro 500, Sonar Platinum, KRK Rokit 6
|
gustabo
Max Output Level: -49.5 dBFS
- Total Posts : 2591
- Joined: 1/5/2009
- Status: offline
Re: Not able to access the early access?
March 30, 16 8:04 PM
(permalink)
ampfixer
It just looks like more stuff that nobody has asked for. Not sure what's going on this year.
Then don't install it...
Cakewalk by Bandlab - Win10 Pro x64 - StudioCat Platinum Studio DAW - 32 GB Ram - MOTU UltraLite-mk3
M-Audio Keystation 88ES - Akai MPD26 (hot-rodded) - Alesis DM10 - a few guitars, a few amps
Novation Launch Control - Korg nanoKONTROL2 - PreSonus FaderPort - DAW Remote HD on iPad
Adam A7X - Behritone C50A
PreSonus Monitor Station v2 (controlling the mons)
https://www.facebook.com/groups/sonarusergroup/
|
jbow
Max Output Level: -0.2 dBFS
- Total Posts : 7601
- Joined: 11/26/2003
- Status: offline
Re: Not able to access the early access?
March 30, 16 8:20 PM
(permalink)
Sonar Platinum Studiocat Pro 16G RAM (some bells and whistles) HP Pavilion dm4 1165-dx (i5)-8G RAM Octa-Capture KRK Rokit-8s MIDI keyboards... Control Pad mics. I HATE THIS CMPUTER KEYBARD!
|
Anderton
Max Output Level: 0 dBFS
- Total Posts : 14070
- Joined: 11/6/2003
- Status: offline
Re: Not able to access the early access?
March 30, 16 8:22 PM
(permalink)
☄ Helpfulby gustabo March 30, 16 8:38 PM
ampfixer
It just looks like more stuff that nobody has asked for. Not sure what's going on this year.
Being able to conform a tempo map to music played without a click track or recorded is a huge deal, very difficult to implement, and many have asked for it. Cakewalk is one of only two DAWs with the ARA integration needed to pull it off. Also if you look at the forum requests for ways to learn about SONAR, and the many questions that are already answered in Help, it's pretty clear the entire way of doing help needed to be revamped. I think those two things alone make this a pretty strong release. And although no one may have asked for multiband processing track templates, multiband processing is a huge part of what I do, and patch points/aux tracks make it sooo much easier...I suspect once people try it, they'll be hooked.
|
ronniejames
Max Output Level: -90 dBFS
- Total Posts : 45
- Joined: 7/21/2011
- Status: offline
Re: Not able to access the early access?
March 30, 16 8:23 PM
(permalink)
where in the world is the rollback menu...i can't find it anywhere in the command center>
|
Cookie Jarvis
Max Output Level: -85 dBFS
- Total Posts : 289
- Joined: 3/11/2009
- Status: offline
Re: Not able to access the early access?
March 30, 16 8:39 PM
(permalink)
C:\Program Files\Cakewalk\Shared Utilities\CW120Auto.dll
Unable to register the DLL/OCX: RegSvr32 failed with exit code 0x3.
Anyway to actually install this?? ;)
Bill
|
scook
Forum Host
- Total Posts : 24146
- Joined: 7/27/2005
- Location: TX
- Status: offline
Re: Not able to access the early access?
March 30, 16 8:39 PM
(permalink)
Right-click on the SONAR line in the Command Center
|
Cookie Jarvis
Max Output Level: -85 dBFS
- Total Posts : 289
- Joined: 3/11/2009
- Status: offline
Re: Not able to access the early access?
March 30, 16 8:47 PM
(permalink)
I posted over in the problem section...hopefully there's a way to fix this :)
Bill
|
scook
Forum Host
- Total Posts : 24146
- Joined: 7/27/2005
- Location: TX
- Status: offline
Re: Not able to access the early access?
March 30, 16 9:01 PM
(permalink)
Better to work your issue in the Problem Report section. The error is not unique to this release. I posted on your thread.
|
belltunes
Max Output Level: -89 dBFS
- Total Posts : 64
- Joined: 11/10/2003
- Status: offline
Re: Not able to access the early access?
March 30, 16 10:29 PM
(permalink)
I performed the early access routing in the command center under the rollback menu and all appeared to process and update successfully, but it still shows Newburyport as the version? Is this as expected? UPDATE: I downloaded the Early Access a 2nd time and I am now seeing the new version and build.
post edited by belltunes - March 30, 16 11:40 PM
|
schwa
Max Output Level: -88 dBFS
- Total Posts : 118
- Joined: 11/18/2003
- Location: Boston
- Status: offline
Re: Not able to access the early access?
March 30, 16 10:41 PM
(permalink)
Anderton
ampfixer
It just looks like more stuff that nobody has asked for. Not sure what's going on this year.
Being able to conform a tempo map to music played without a click track or recorded is a huge deal, very difficult to implement, and many have asked for it. Cakewalk is one of only two DAWs with the ARA integration needed to pull it off. Also if you look at the forum requests for ways to learn about SONAR, and the many questions that are already answered in Help, it's pretty clear the entire way of doing help needed to be revamped. I think those two things alone make this a pretty strong release.
And although no one may have asked for multiband processing track templates, multiband processing is a huge part of what I do, and patch points/aux tracks make it sooo much easier...I suspect once people try it, they'll be hooked.
I have to admit I was hoping for an update for the mastering plugs, but I think this should turn out to be a good update for me. I use electric pianos all the time, so the lounge lizard update is welcome. The ultra analog looks cool even if I have some classic synths on hand. As a user returning to SONAR after some years away, I welcome an improved help interface. I plan on using Melodyne, so any upgrade is welcome. I'm going to wait until it's fully baked, but I think I'll be able to make good use of the new stuff.
HP Envy 850, MOTU 424/2408, MIDI Express, NVidea GTX970, Project Studio 6 monitors, Mackie Control and Ext, Frontier Transport Solid State Logic Alpha VHD, UA LA-610, DBX 566, TC M One-XL, POD XT, Roland XP-30 Shure KCM-44, SM-7, SM-81 (pair), SM-57 Martin D28 Marquis, Strats, LP's, Carr Mercury, and Marshall Amps SONAR Platinum, Rapture Pro, Pro Channel Pack, Waves Gold, L3, L2, TH3 (Full), Amplitube 4
|
Base 57
Max Output Level: -86 dBFS
- Total Posts : 249
- Joined: 12/26/2014
- Status: offline
Re: Not able to access the early access?
March 30, 16 10:43 PM
(permalink)
Mine shows version 22.03.00 build 70 in the help menu in Sonar and is working as expected. I have not checked what CCC says the version is.
Pasting the tempo from melodyne to the timeline works very well.
|
vanceen
Max Output Level: -74 dBFS
- Total Posts : 814
- Joined: 11/8/2003
- Status: offline
Re: Not able to access the early access?
March 30, 16 10:55 PM
(permalink)
Anderton
ampfixer
It just looks like more stuff that nobody has asked for. Not sure what's going on this year.
Being able to conform a tempo map to music played without a click track or recorded is a huge deal, very difficult to implement, and many have asked for it. Cakewalk is one of only two DAWs with the ARA integration needed to pull it off...
Absolutely. This feature alone would have saved me many hours over the last few years. I've been really impressed at Melodyne's performance in extracting timing, but pulling that into a SONAR project has been pretty long-winded. I hope this works as well as it promises to. And I hope to see multi-track Melodyne integrated with SONAR as well. Nothing is better for tightening up harmonies (sorry VocalSync), but doing it involves a lot of exporting and importing of files back and forth between the programs.
SONAR Platinum Windows 10 ASUS X99E WE Core i7 5960X 32 GB Corsair DDR4 2133 C13 Fireface UFX USB driver 1.098 GeForce GTX 950
|
thornton
Max Output Level: -86 dBFS
- Total Posts : 222
- Joined: 9/26/2014
- Status: offline
Re: Not able to access the early access?
March 30, 16 11:30 PM
(permalink)
what is this multiband processing track templates
|
jbraner
Max Output Level: -57 dBFS
- Total Posts : 1830
- Joined: 11/6/2003
- Location: Edinburgh, Scotland
- Status: offline
Re: Not able to access the early access?
March 31, 16 1:31 PM
(permalink)
Can I just verify - if we *don't* install the early release, it will eventually show up as an *update* (in a week or two?) in the command center?
|