rgturner
Max Output Level: -89 dBFS
- Total Posts : 81
- Joined: 2006/04/01 10:45:40
- Status: offline
AAS Lounge Lizard MIA
Help! I can't find AAS Lounge Lizard. Did I screw up the installation? Is it hidden somewhere?
BTW - I don't see STRUM also.
How do I get these to appear?
I'm running:
SONAR Platinum
22.3.0 Build 71 [2016.03] - x64
|
Rob[at]Sound-Rehab
Max Output Level: -47 dBFS
- Total Posts : 2819
- Joined: 2011/02/03 04:31:35
- Location: Sound-Rehab, Austria
- Status: offline
Re: AAS Lounge Lizard MIA
2016/04/08 03:10:50
(permalink)
☄ Helpfulby Zargg71 2016/04/08 05:37:11
to check ... - Did you install all of CCC packages i.e. also "platinum instrument collection"
- Unless you have "Automatic Background Scan" or "Scan on Startup" enabled, initiate a VST scan now
- If it still not shows, check that you are not using some custom layout for the synths which do not include the latest ones
GOOD TUNES LAST FOREVER +++ Visit the Rehab +++ DAW: Platinum/X3e, win10 64 bit, i7-3930K (6x3.2GHz), Asus Sabertooth X79, 32 GB DDR3 1600MHz, ATI HD 5450, 120 GB SSD OCZ Agility3, 2x 1TB WD HDD SATA 600 Audio-Interface: 2x MOTU 1248 AVB, Focusrite OctoPre, (Roland Octa-Capture) Control-Surface: VS-700C VSTi: WAVES, NI K10u, FabFilter, IK, ... (too many really)
|
rgturner
Max Output Level: -89 dBFS
- Total Posts : 81
- Joined: 2006/04/01 10:45:40
- Status: offline
Re: AAS Lounge Lizard MIA
2016/04/08 14:51:14
(permalink)
Thanks! I'll check later and get back with you.
|
digimidi
Max Output Level: -81 dBFS
- Total Posts : 496
- Joined: 2003/11/15 19:21:08
- Location: Eastern part of the country
- Status: offline
Re: AAS Lounge Lizard MIA
2016/04/08 20:00:26
(permalink)
Yeah, the problem is that you have to perform a manual scan (rescan) for Platinum to see it. I had the same problem, but it is now visible. Press P on the keyboard, then look to the left for vst settings, and proceed from there by ticking the boxes for a manual scan. AFter it is completed, you should see it.
I started out with nothing and I still have most of it left... http://daveowenmusic.com/http://fabulous52s.com/https://soundcloud.com/daveowenmusic Sonar Platinum Edition/Cakewalk by BandLab: Dell 8700 XPS i7 16GB RAM, Cyberpower laptop w/8GB RAM/i7/2GB NVidia card/Tascam US1641/Focusrite 18i6/Melodyne Studio 4/Waves Plugs (a lot)/Garritan/EWQL Symphony Silver & Fab 4 and a bunch of other stuff. Studio One 3/Magix Samplitude Pro X3 Suite/Mixcraft 8 Pro/Reaper/Acid Pro 8
|
Rob[at]Sound-Rehab
Max Output Level: -47 dBFS
- Total Posts : 2819
- Joined: 2011/02/03 04:31:35
- Location: Sound-Rehab, Austria
- Status: offline
Re: AAS Lounge Lizard MIA
2016/04/09 05:37:55
(permalink)
☄ Helpfulby digimidi 2016/04/10 16:03:55
digimidi
Yeah, the problem is that you have to perform a manual scan (rescan) for Platinum to see it. I had the same problem, but it is now visible. Press P on the keyboard, then look to the left for vst settings, and proceed from there by ticking the boxes for a manual scan. AFter it is completed, you should see it.
I can recommend anyone to switch to "scan at startup" for VST scan which takes care of that automatically and does never interfere you while working projects. I use that for my studio DAW since Noel convinced and guess what - he was right. i never had problem with missing VST plugs or similar since ... Only for the live DAW where I don't rely on any VST plugs I have turned it off.
GOOD TUNES LAST FOREVER +++ Visit the Rehab +++ DAW: Platinum/X3e, win10 64 bit, i7-3930K (6x3.2GHz), Asus Sabertooth X79, 32 GB DDR3 1600MHz, ATI HD 5450, 120 GB SSD OCZ Agility3, 2x 1TB WD HDD SATA 600 Audio-Interface: 2x MOTU 1248 AVB, Focusrite OctoPre, (Roland Octa-Capture) Control-Surface: VS-700C VSTi: WAVES, NI K10u, FabFilter, IK, ... (too many really)
|
stevec
Max Output Level: 0 dBFS
- Total Posts : 11546
- Joined: 2003/11/04 15:05:54
- Location: Parkesburg, PA
- Status: offline
Re: AAS Lounge Lizard MIA
2016/04/10 12:27:22
(permalink)
RehabRob
digimidi
Yeah, the problem is that you have to perform a manual scan (rescan) for Platinum to see it. I had the same problem, but it is now visible. Press P on the keyboard, then look to the left for vst settings, and proceed from there by ticking the boxes for a manual scan. AFter it is completed, you should see it.
I can recommend anyone to switch to "scan at startup" for VST scan which takes care of that automatically and does never interfere you while working projects. I use that for my studio DAW since Noel convinced and guess what - he was right. i never had problem with missing VST plugs or similar since ...
+1 Once everything has been fully scanned that first time around re-scans are quick - I'd estimate a few seconds even on my old system. The only slight delay is when new plugins are added to the list, and those are called out by name for confirmation.
SteveC https://soundcloud.com/steve-cocchi http://www.soundclick.com/bands/pagemusic.cfm?bandID=39163 SONAR Platinum x64, Intel Q9300 (2.5Ghz), Asus P5N-D, Win7 x64 SP1, 8GB RAM, 1TB internal + ESATA + USB Backup HDDs, ATI Radeon HD5450 1GB RAM + dual ViewSonic VA2431wm Monitors; Focusrite 18i6 (ASIO); Komplete 9, Melodyne Studio 4, Ozone 7 Advanced, Rapture Pro, GPO5, Valhalla Plate, MJUC comp, MDynamic EQ, lots of other freebie VST plugins, synths and Kontakt libraries
|
rgturner
Max Output Level: -89 dBFS
- Total Posts : 81
- Joined: 2006/04/01 10:45:40
- Status: offline
Re: AAS Lounge Lizard MIA
2016/04/14 22:39:26
(permalink)
☼ Best Answerby robert_e_bone 2016/04/16 14:02:18
Thanks to all of you. I recently received an email offer to purchase the full-blown version of Lounge Lizard. I bought it. Wow! It's incredible. The tones are insane. I was able to incorporate it with absolutely no tweaks.
Again, thank you all.
|