Frostysnake
Max Output Level: -76 dBFS
- Total Posts : 722
- Joined: 2006/10/26 14:31:38
- Status: offline
Anyone using a VS-100 with SPLAT?
I'm trying to figure out why my VS-100 will do nothing. It worked without a problem with X3. Can someone maybe help me here? I have it set up like I've always done, yet nothing works.  Thanks in advance fellas! David
Sonar Platinum Windows 7 64-bit 1 TB Hard Drive\Seagate 500 GB Slave VS-100 MOTU 2408 MK3 A-Pro 800
|
FCCfirstclass
Max Output Level: -71 dBFS
- Total Posts : 969
- Joined: 2003/11/15 15:02:42
- Location: Las Vegas, Nevada
- Status: offline
Re: Anyone using a VS-100 with SPLAT?
2016/04/24 12:18:56
(permalink)
Dave,
Did you keep your X3 install before installing SPlat? Also what OS are you using?
My VS 100 is working just great with Splat using Win 10. The ACT buttons and the transport section work as does the MIDI settings. Double check your MIDI settings in Pref. Make sure that The VS 100 control is checked.
Win 10 Pro x64, 32Gb DDR3 ram, Sonar Platinum, Cubase 9.5, Mackie MCU Pro, Cakewalk VS 100, Roland Octa-Capture, A 800 Pro, Carver M-1.5t amp & C4000 pre amp, various mics, drums and brass instruments. And away we go!
|
Grem
Max Output Level: -19.5 dBFS
- Total Posts : 5562
- Joined: 2005/06/28 09:26:32
- Location: Baton Rouge Area
- Status: offline
Re: Anyone using a VS-100 with SPLAT?
2016/04/24 12:23:42
(permalink)
Yeah I use a VS-100 with SPlat. I was just using it to select the track I wanted and arm record, then start recording.
In SPlat you set it up pretty much like you do in X3. I have both on my system and it looks to be the same.
But I do remember when SPlat first came out it had some "problems loosing the setting" so to say. And you had to reset them all the time. But that was fixed. I haven't had a problem with my VS-100 in a while.
I am on Win7 64.
Grem
Michael Music PC i7 2600K; 64gb Ram; 3 256gb SSD, System, Samples, Audio; 1TB & 2TB Project Storage; 2TB system BkUp; RME FireFace 400; Win 10 Pro 64; CWbBL 64, Home PCAMD FX 6300; 8gb Ram; 256 SSD sys; 2TB audio/samples; Realtek WASAPI; Win 10 Home 64; CWbBL 64 Surface Pro 3Win 10 i7 8gb RAM; CWbBL 64
|
EezyP
Max Output Level: -89 dBFS
- Total Posts : 78
- Joined: 2008/08/04 16:10:35
- Status: offline
Re: Anyone using a VS-100 with SPLAT?
2016/04/24 14:10:28
(permalink)
VS100 fine here under W8.1. Edit>Preferences>MIDI>Control Surfaces, check in- and out- ports 'Control(VS-100)' [ NOT 'MIDI VS-100'] from the drop down menus under 'Connected Controllers/Surfaces' . If the VS100's not showing there's a (very discrete) little yellow star 'add' button in the upper rh corner of the dialogue box. The transport buttons light up and everything! For me the VS-100's a keeper for as long as possible. Good luck!
post edited by EezyP - 2016/04/24 18:44:38
|
Frostysnake
Max Output Level: -76 dBFS
- Total Posts : 722
- Joined: 2006/10/26 14:31:38
- Status: offline
Re: Anyone using a VS-100 with SPLAT?
2016/04/26 19:17:54
(permalink)
I did not keep X3...I did a clean install on Windows 7. Is moving to Win 10 or keeping X3 necessary for the VS-100 to work?
Sonar Platinum Windows 7 64-bit 1 TB Hard Drive\Seagate 500 GB Slave VS-100 MOTU 2408 MK3 A-Pro 800
|
Frostysnake
Max Output Level: -76 dBFS
- Total Posts : 722
- Joined: 2006/10/26 14:31:38
- Status: offline
Re: Anyone using a VS-100 with SPLAT?
2016/04/26 19:22:08
(permalink)
I also noticed that the VS-100 is not listed in available controllers...I think I am definitely missing something here...
Sonar Platinum Windows 7 64-bit 1 TB Hard Drive\Seagate 500 GB Slave VS-100 MOTU 2408 MK3 A-Pro 800
|
scook
Forum Host
- Total Posts : 24146
- Joined: 2005/07/27 13:43:57
- Location: TX
- Status: offline
Re: Anyone using a VS-100 with SPLAT?
2016/04/26 19:26:00
(permalink)
|
Frostysnake
Max Output Level: -76 dBFS
- Total Posts : 722
- Joined: 2006/10/26 14:31:38
- Status: offline
Re: Anyone using a VS-100 with SPLAT?
2016/04/26 20:39:42
(permalink)
So I tried that Scook...no go Thanks though!
Sonar Platinum Windows 7 64-bit 1 TB Hard Drive\Seagate 500 GB Slave VS-100 MOTU 2408 MK3 A-Pro 800
|
Frostysnake
Max Output Level: -76 dBFS
- Total Posts : 722
- Joined: 2006/10/26 14:31:38
- Status: offline
Re: Anyone using a VS-100 with SPLAT?
2016/04/26 20:42:11
(permalink)
I for the life of me cannot figure this out. I tried the Cakewalk generic. Still nothing.
Sonar Platinum Windows 7 64-bit 1 TB Hard Drive\Seagate 500 GB Slave VS-100 MOTU 2408 MK3 A-Pro 800
|
Frostysnake
Max Output Level: -76 dBFS
- Total Posts : 722
- Joined: 2006/10/26 14:31:38
- Status: offline
Re: Anyone using a VS-100 with SPLAT?
2016/04/26 20:59:03
(permalink)
For the one's of you that are using them, which controller are you using? The Cakewalk Generic or is there a VS-XXX? I can't remember when I had it setup last in X3...I just kinda got back into recording after almost 2 years of...
Sonar Platinum Windows 7 64-bit 1 TB Hard Drive\Seagate 500 GB Slave VS-100 MOTU 2408 MK3 A-Pro 800
|
Frostysnake
Max Output Level: -76 dBFS
- Total Posts : 722
- Joined: 2006/10/26 14:31:38
- Status: offline
Re: Anyone using a VS-100 with SPLAT?
2016/04/26 21:21:09
(permalink)
Sonar Platinum Windows 7 64-bit 1 TB Hard Drive\Seagate 500 GB Slave VS-100 MOTU 2408 MK3 A-Pro 800
|
FCCfirstclass
Max Output Level: -71 dBFS
- Total Posts : 969
- Joined: 2003/11/15 15:02:42
- Location: Las Vegas, Nevada
- Status: offline
Re: Anyone using a VS-100 with SPLAT?
2016/04/27 12:17:38
(permalink)
Glad you got it working. 
Win 10 Pro x64, 32Gb DDR3 ram, Sonar Platinum, Cubase 9.5, Mackie MCU Pro, Cakewalk VS 100, Roland Octa-Capture, A 800 Pro, Carver M-1.5t amp & C4000 pre amp, various mics, drums and brass instruments. And away we go!
|