Answered[SOLVED] Dynamically change a track bus?

Author
Post
Essentials Only Full Version
rogeriodec
Max Output Level: -75 dBFS
  • Total Posts : 753
  • Joined: 2004/04/09 13:55:04
  • Location: Brazil
  • Status: offline
2016/07/16 15:25:06 (permalink)

[SOLVED] Dynamically change a track bus?

I have some tracks, which in some measures they must be associated with a bus and other further measures they should be associated to a different bus.
I wonder if it is possible to dynamically change the bus for a track?
post edited by rogeriodec - 2016/07/16 16:32:53

rogeriodec.com.br


* Cakewalk By Bandlabs (always lastest versions), Window 10 x64
* Focusrite Scarlett Solo Audio Interface
* Intel i7-4790K CPU @ 4.00 GHz / ASROCK EXTREME 4 Z97 Mobo
* 2 SSD Samsung Evo 250 Gb (RAID-0) + 1 Western Digital 2 Tb + 1 Seagate 1 Tb
* Onboard video / 16 Gb RAM HyperX Fury 1600 Mhz
* 3 LCD Monitors
* Axiom 61 MIDI Controller, Tapco S5 Active Studio Monitors
#1
See best answerList Solutions Only

3 Replies Related Threads
    Anderton
    Max Output Level: 0 dBFS
    • Total Posts : 14070
    • Joined: 2003/11/06 14:02:03
    • Status: offline
    Re: Dynamically change a track bus? 2016/07/16 15:45:19 (permalink) ☄ Helpfulby rogeriodec 2016/07/16 16:31:58
    Create two sends for the track, feed each one to the appropriate bus, and then automate the sends or bus outputs (depending on the situation). You could also feed the two bus outputs to another bus or aux track if you wanted to automate the overall bus level, regardless of which bus was selected. The same technique would work with Aux Tracks.

    The first 3 books in "The Musician's Guide to Home Recording" series are available from Hal Leonard and http://www.reverb.com. Listen to my music on http://www.YouTube.com/thecraiganderton, and visit http://www.craiganderton.com. Thanks!
    #2
    kellerpj
    Max Output Level: -85 dBFS
    • Total Posts : 287
    • Joined: 2003/12/05 00:25:05
    • Status: offline
    Re: Dynamically change a track bus? 2016/07/16 15:49:40 (permalink) ☼ Best Answerby rogeriodec 2016/07/16 16:31:45
    rogeriodec:
     
    Assuming audio tracks, maybe this will work:
    • On each track that needs to be dynamically routed, place a send to each bus to which you will want to route the audio during your piece
    • Use automation on the Send levels added to each track to "move" the output from one send to another at different parts of the piece
    Hope this helps,
    Paul

    "The thing about quotes from the internet is that it's hard to verify their authenticity." - Abraham Lincoln
    #3
    rogeriodec
    Max Output Level: -75 dBFS
    • Total Posts : 753
    • Joined: 2004/04/09 13:55:04
    • Location: Brazil
    • Status: offline
    Re: Dynamically change a track bus? 2016/07/16 16:14:30 (permalink)
    Thank you very much!

    rogeriodec.com.br


    * Cakewalk By Bandlabs (always lastest versions), Window 10 x64
    * Focusrite Scarlett Solo Audio Interface
    * Intel i7-4790K CPU @ 4.00 GHz / ASROCK EXTREME 4 Z97 Mobo
    * 2 SSD Samsung Evo 250 Gb (RAID-0) + 1 Western Digital 2 Tb + 1 Seagate 1 Tb
    * Onboard video / 16 Gb RAM HyperX Fury 1600 Mhz
    * 3 LCD Monitors
    * Axiom 61 MIDI Controller, Tapco S5 Active Studio Monitors
    #4
    Jump to:
    © 2025 APG vNext Commercial Version 5.1