Keni
Max Output Level: -17.5 dBFS
- Total Posts : 5769
- Joined: 2003/11/04 10:42:15
- Location: Willits, CA USA
- Status: offline
[Solved] Problem using LP Updates
Anyone else seeing anything like this?
I have a simple project with a wav file bed (bass/synth/guitar mix) and an instance of AD2 spread to individual tracks...
If I insert either of the LP plugins to any audio track, AD2 loses beats? By this I mean that only every few programmed hits sounds. If I remove the plugin all is well again...
This happens if I place the plugin on the bed or any of the audio outputs of the AD2...
|
John Joseph [Cakewalk]
Max Output Level: -88 dBFS
- Total Posts : 126
- Joined: 2015/02/18 16:37:35
- Status: offline
Re: Problem using LP Updates
2016/07/20 15:09:04
(permalink)
That sounds odd. This isn't a solution, but can you try experimenting with different buffer sizes to see if that resolves/exacerbates the problem?
|
Vilovilo
Max Output Level: -84 dBFS
- Total Posts : 335
- Joined: 2014/05/13 17:15:24
- Location: France
- Status: offline
Re: Problem using LP Updates
2016/07/20 15:12:16
(permalink)
Check the sync and caches parameters in preferences.if LP is in its glutton mode( linear phase) then increasing the buffer in the file system area can help you to recover thoose lost beats.
|
dcumpian
Max Output Level: -34 dBFS
- Total Posts : 4124
- Joined: 2005/11/03 15:50:51
- Status: offline
Re: Problem using LP Updates
2016/07/20 15:47:30
(permalink)
Can you freeze AD2 first?
Dan
Mixing is all about control. My music: http://dancumpian.bandcamp.com/ or https://soundcloud.com/dcumpian Studiocat Advanced Studio DAW (Intel i5 3550 @ 3.7GHz, Z77 motherboard, 16GB Ram, lots of HDDs), Sonar Plat, Mackie 1604, PreSonus Audiobox 44VSL, ESI 4x4 Midi Interface, Ibanez Bass, Custom Fender Mexi-Strat, NI S88, Roland JV-2080 & MDB-1, Komplete, Omnisphere, Lots o' plugins.
|
Keni
Max Output Level: -17.5 dBFS
- Total Posts : 5769
- Joined: 2003/11/04 10:42:15
- Location: Willits, CA USA
- Status: offline
Re: Problem using LP Updates
2016/07/20 17:32:23
(permalink)
THanks for the time and ideas gang...
I will see if changing the buffer size has an affect... I'll be back at my DAW soon...
This machine is dual Xeon (12 core total) and 64G RAM... You'd think that would be enough? ;-)
I'll post ASAP...
|
Keni
Max Output Level: -17.5 dBFS
- Total Posts : 5769
- Joined: 2003/11/04 10:42:15
- Location: Willits, CA USA
- Status: offline
Re: Problem using LP Updates
2016/07/20 17:56:43
(permalink)
Got to it faster than I thought I could... ;-)
You guts nailed it!
It took me a moment to remember the midi playback buffers as I first tried (unsuccessfully) with the audio playback buffers...
I'm not sure where the fine point is. The buffer length wa set at 250. I increased it to 500 and it appears to be running fine. I was surprised to see 250 instead of 256... ;-)
Thanks again to all of you...
|
gustabo
Max Output Level: -49.5 dBFS
- Total Posts : 2591
- Joined: 2009/01/05 17:32:38
- Status: offline
Re: Problem using LP Updates
2016/07/20 18:04:40
(permalink)
Keni
Got to it faster than I thought I could... ;-)
You guts nailed it!
It took me a moment to remember the midi playback buffers as I first tried (unsuccessfully) with the audio playback buffers...
I'm not sure where the fine point is. The buffer length wa set at 250. I increased it to 500 and it appears to be running fine. I was surprised to see 250 instead of 256... ;-)
Thanks again to all of you...
The midi lookahead buffer is in milliseconds, 250 may have worked for you in slower tempo songs but not faster tempo songs, 500 should be the new default.
Cakewalk by Bandlab - Win10 Pro x64 - StudioCat Platinum Studio DAW - 32 GB Ram - MOTU UltraLite-mk3
M-Audio Keystation 88ES - Akai MPD26 (hot-rodded) - Alesis DM10 - a few guitars, a few amps
Novation Launch Control - Korg nanoKONTROL2 - PreSonus FaderPort - DAW Remote HD on iPad
Adam A7X - Behritone C50A
PreSonus Monitor Station v2 (controlling the mons)
https://www.facebook.com/groups/sonarusergroup/
|
Keni
Max Output Level: -17.5 dBFS
- Total Posts : 5769
- Joined: 2003/11/04 10:42:15
- Location: Willits, CA USA
- Status: offline
Re: Problem using LP Updates
2016/07/20 19:36:11
(permalink)
Thanks gustabo...
AOK... That's where I am now.
Interesting though... Until this update I had no trouble at 200...
|
kzmaier
Max Output Level: -81 dBFS
- Total Posts : 461
- Joined: 2010/10/18 08:20:01
- Location: Rochester, NY
- Status: offline
Re: Problem using LP Updates
2016/07/21 11:06:28
(permalink)
Is there any side effect or reason not to go to 500?
Thanks
|
Keni
Max Output Level: -17.5 dBFS
- Total Posts : 5769
- Joined: 2003/11/04 10:42:15
- Location: Willits, CA USA
- Status: offline
Re: Problem using LP Updates
2016/07/21 12:02:14
(permalink)
My thanks to the moderator who marked the thread solved... I was just about to do that!
;-)
|
JohnEgan
Max Output Level: -80 dBFS
- Total Posts : 543
- Joined: 2014/10/21 10:03:57
- Location: Ottawa, Ontario, Canada
- Status: offline
Re: Problem using LP Updates
2016/07/21 15:57:06
(permalink)
Short delay on hitting play, actually I have mine set at 705 ms, 500 wasn't enough, and number of buffers set to 128 (from 64 default), seemed to resolve annoying midi note dropping in AD2 (and Rapture)
John Egan Sonar Platinum (2017-10),RME-UFX, PC-CPU - i7-5820, 3.3 GHz, 6 core, ASUS X99-AII, 16GB ram, GTX 960, 500 GB SSD, 2TB HDD x 2, Win7 Pro x64, O8N2 Advanced, Melodyne Studio,.... (2 cats :(, in the yard).
|