dahjah
Max Output Level: -84 dBFS
- Total Posts : 313
- Joined: 7/31/2010
- Location: Ontario
- Status: offline
After update
After this update I am now getting pops or farts in my audio, which i wasn't getting before.
|
chuckebaby
Max Output Level: 0 dBFS
- Total Posts : 13146
- Joined: 1/4/2011
- Status: offline
Re: After update
August 17, 16 3:18 PM
(permalink)
check your setting in "play back and recording" also check your latency settings.
make sure your driver mode hasn't changed or something.
have you tried looking at that ?
Windows 8.1 X64 Sonar Platinum x64 Custom built: Asrock z97 1150 - Intel I7 4790k - 16GB corsair DDR3 1600 - PNY SSD 220GBFocusrite Saffire 18I8 - Mackie Control
|
dahjah
Max Output Level: -84 dBFS
- Total Posts : 313
- Joined: 7/31/2010
- Location: Ontario
- Status: offline
Re: After update
August 17, 16 3:52 PM
(permalink)
yes I had them both set at 256 before. I set the playback to 512 to see if it would still happen and it did.
|
dahjah
Max Output Level: -84 dBFS
- Total Posts : 313
- Joined: 7/31/2010
- Location: Ontario
- Status: offline
Re: After update
August 17, 16 4:34 PM
(permalink)
I set playback all the up to 1024 and the farts still continued, I set the Latency from 6-7 and still happens.
Makes no sense that i do an update and this starts to happen.
|
promidi
Max Output Level: -66 dBFS
- Total Posts : 1220
- Joined: 11/21/2014
- Location: South Australia
- Status: offline
Re: After update
August 17, 16 7:20 PM
(permalink)
dahjah
After this update I am now getting pops or farts in my audio, which i wasn't getting before.
This certainly was not my experience after updating the the August Early release. In fact, performance was vastly improved with this update. Have you tried exiting Sonar, renaming (don't delete) your aud.ini file and restarting Sonar so that Sonar can rebuild the file. The Aud.ini file reside here: %APPDATA%\Cakewalk\SONAR Platinum
Windows 10 64bit fully patched, 16 gig ram . PCR-800 Controller. (Working in Win 10 1809 64bit)CPU: i5 4670. Video: Nvidia GTX560ti (latest drivers). Audio IF: Focusrite 2i2 2nd Gen
Internet always on.
Software: Cakewalk by Bandlab (2018.09 B29)
ASIO mode. 24bit 48khz 256 samples Rapture Pro, AAS GS2, VS-3, EP-4, VA-2, Chromophone 2, Z3TA+ 2, Addictive drums 2, Addictive Keys, Mpowersynth (latest), Iris 2, GPO5, Sampletank 3,
|
jb101
Max Output Level: -46 dBFS
- Total Posts : 2946
- Joined: 12/4/2011
- Status: offline
Re: After update
August 17, 16 8:02 PM
(permalink)
Your signature, though very full, doesn't mention your system specs.
Out of interest, are you running Windows 10, and have you installed the latest update, knowingly or otherwise?
|
Anderton
Max Output Level: 0 dBFS
- Total Posts : 14070
- Joined: 11/6/2003
- Status: offline
Re: After update
August 17, 16 8:20 PM
(permalink)
Disable any audio drivers your ASIO interface (you are using one, right?) doesn't need.
|
chuckebaby
Max Output Level: 0 dBFS
- Total Posts : 13146
- Joined: 1/4/2011
- Status: offline
Re: After update
August 17, 16 9:03 PM
(permalink)
your problem is probably easy to solve with just a little bit of info.
as JB mentioned, your Windows OS and Audio set up.
Windows 8.1 X64 Sonar Platinum x64 Custom built: Asrock z97 1150 - Intel I7 4790k - 16GB corsair DDR3 1600 - PNY SSD 220GBFocusrite Saffire 18I8 - Mackie Control
|
dahjah
Max Output Level: -84 dBFS
- Total Posts : 313
- Joined: 7/31/2010
- Location: Ontario
- Status: offline
Re: After update
August 18, 16 1:28 AM
(permalink)
Ok I have now put my specs in my signiture
I only turn the Focusrite on when I'm recording so it is not a factor at this time.
Windows 8.1 Pro X64 Sonar Platinum x64 Processor - AMD FX 8350 Eight Core Processor 4GB 32 GB MemoryVS 700 System Focusrite Liquid Saffire 56(Focusrite is only on when recording)
|
Bristol_Jonesey
Max Output Level: 0 dBFS
- Total Posts : 16775
- Joined: 10/8/2007
- Location: Bristol, UK
- Status: offline
Re: After update
August 18, 16 4:14 AM
(permalink)
I only turn the Focusrite on when I'm recording So what is playback using?
CbB, Platinum, 64 bit throughoutCustom built i7 3930, 32Gb RAM, 2 x 1Tb Internal HDD, 1 x 1TB system SSD (Win 7), 1 x 500Gb system SSD (Win 10), 2 x 1Tb External HDD's, Dual boot Win 7 & Win 10 64 Bit, Saffire Pro 26, ISA One, Adam P11A,
|
dcumpian
Max Output Level: -34 dBFS
- Total Posts : 4124
- Joined: 11/3/2005
- Status: offline
Re: After update
August 18, 16 8:10 AM
(permalink)
Letting Sonar rebuild the AUD.INI file is the best first step if you are upgrading from an earlier version of Sonar (pre-Plat)...
Dan
Mixing is all about control. My music: http://dancumpian.bandcamp.com/ or https://soundcloud.com/dcumpian Studiocat Advanced Studio DAW (Intel i5 3550 @ 3.7GHz, Z77 motherboard, 16GB Ram, lots of HDDs), Sonar Plat, Mackie 1604, PreSonus Audiobox 44VSL, ESI 4x4 Midi Interface, Ibanez Bass, Custom Fender Mexi-Strat, NI S88, Roland JV-2080 & MDB-1, Komplete, Omnisphere, Lots o' plugins.
|
dahjah
Max Output Level: -84 dBFS
- Total Posts : 313
- Joined: 7/31/2010
- Location: Ontario
- Status: offline
Re: After update
August 18, 16 12:20 AM
(permalink)
Bristol_Jonesey
I only turn the Focusrite on when I'm recording
So what is playback using?
The VS700 Rack
Windows 8.1 Pro X64 Sonar Platinum x64 Processor - AMD FX 8350 Eight Core Processor 4GB 32 GB MemoryVS 700 System Focusrite Liquid Saffire 56(Focusrite is only on when recording)
|
dahjah
Max Output Level: -84 dBFS
- Total Posts : 313
- Joined: 7/31/2010
- Location: Ontario
- Status: offline
Re: After update
August 18, 16 12:22 AM
(permalink)
dcumpian
Letting Sonar rebuild the AUD.INI file is the best first step if you are upgrading from an earlier version of Sonar (pre-Plat)...
Dan
I did a system restore and went back to pre-update as i had a project to finish mixing and deliver. I was already on platinum before this update, but i will try that when I do the update again.
Windows 8.1 Pro X64 Sonar Platinum x64 Processor - AMD FX 8350 Eight Core Processor 4GB 32 GB MemoryVS 700 System Focusrite Liquid Saffire 56(Focusrite is only on when recording)
|
dcumpian
Max Output Level: -34 dBFS
- Total Posts : 4124
- Joined: 11/3/2005
- Status: offline
Re: After update
August 18, 16 3:09 PM
(permalink)
dahjah
dcumpian
Letting Sonar rebuild the AUD.INI file is the best first step if you are upgrading from an earlier version of Sonar (pre-Plat)...
Dan
I did a system restore and went back to pre-update as i had a project to finish mixing and deliver.
I was already on platinum before this update, but i will try that when I do the update again.
Platinum to Platinum updates do not need the AUD.INI rebuilt, though it can't hurt if the interface is acting up. Dan
Mixing is all about control. My music: http://dancumpian.bandcamp.com/ or https://soundcloud.com/dcumpian Studiocat Advanced Studio DAW (Intel i5 3550 @ 3.7GHz, Z77 motherboard, 16GB Ram, lots of HDDs), Sonar Plat, Mackie 1604, PreSonus Audiobox 44VSL, ESI 4x4 Midi Interface, Ibanez Bass, Custom Fender Mexi-Strat, NI S88, Roland JV-2080 & MDB-1, Komplete, Omnisphere, Lots o' plugins.
|