Playback is playing but there is not output sound

Author
Post
Essentials Only Full Version
jehrenfeld
Max Output Level: -90 dBFS
  • Total Posts : 3
  • Joined: 2016/08/14 11:56:49
  • Status: offline
2016/08/21 21:16:49 (permalink)

Playback is playing but there is not output sound

I am using a MOTU 828x audio interface and I am running Windows 8.1. I am able to record from my Yamaha MO8 keyboard but when I press playback in Sonar I am not hearing any sound. I've checked the outputs in Sonar and they area assigned to the MOTU Main Outputs. I set the default audio device for Windows to use the MOTU Main Outputs. Is there another setting that I am missing?
 
Thanks in advance,
Joe
#1

6 Replies Related Threads
    Kalle Rantaaho
    Max Output Level: -5 dBFS
    • Total Posts : 7005
    • Joined: 2006/01/09 13:07:59
    • Location: Finland
    • Status: offline
    Re: Playback is playing but there is not output sound 2016/08/22 05:12:28 (permalink)
    Welcome to the forum!
    Are you recording MIDI or audio? Does the tracks level meter move while playing back?
    What driver mode are you using? Motus own ASIO drivers?

    SONAR PE 8.5.3, Asus P5B, 2,4 Ghz Dual Core, 4 Gb RAM, GF 7300, EMU 1820, Bluetube Pre  -  Kontakt4, Ozone, Addictive Drums, PSP Mixpack2, Melda Creative Pack, Melodyne Plugin etc.
    The benefit of being a middle aged amateur is the low number of years of frustration ahead of you.
    #2
    Karyn
    Ma-Ma
    • Total Posts : 9200
    • Joined: 2009/01/30 08:03:10
    • Location: Lincoln, England.
    • Status: offline
    Re: Playback is playing but there is not output sound 2016/08/22 06:58:15 (permalink)
    jehrenfeld
    I've checked the outputs in Sonar and they area assigned to the MOTU Main Outputs.
    I assume you mean the Master Bus Output assignment...
     
    jehrenfeld
    I set the default audio device for Windows to use the MOTU Main Outputs.
    This should not be required, and may even be the cause if Windows is trying to take control of the Motu.  It would also make your Windows system sounds come from your studio monitors..
     
    Use your computer's onboard sound as the Windows default and leave the Motu for Sonar.  If you want Windows sounds through your studio monitors (iTunes, YouTube, etc) connect the output of your onboard sound to a spare input on the Motu.

    Mekashi Futo. 
    Get 10% off all Waves plugins.
    Current DAW.  i7-950, Gigabyte EX58-UD5, 12Gb RAM, 1Tb SSD, 2x2Tb HDD, nVidia GTX 260, Antec 1000W psu, Win7 64bit, Studio 192, Digimax FS, KRK RP8G2, Sonar Platinum

    #3
    jehrenfeld
    Max Output Level: -90 dBFS
    • Total Posts : 3
    • Joined: 2016/08/14 11:56:49
    • Status: offline
    Re: Playback is playing but there is not output sound 2016/08/22 08:23:47 (permalink)
    I was able to figure it out. I did not have my Yamaha usb-midi drivers installed on my new PC. It's been awhile since I've done this. I set the I/O to the Yamaha and I am getting sound now. I get confused between MIDI and USB MIDI. All I want to do is record tracks from my Yamaha and Roland SH-201 and be able to play those tracks back while I play the Yamaha live.
    #4
    Kalle Rantaaho
    Max Output Level: -5 dBFS
    • Total Posts : 7005
    • Joined: 2006/01/09 13:07:59
    • Location: Finland
    • Status: offline
    Re: Playback is playing but there is not output sound 2016/08/22 08:53:43 (permalink)
    MIDI is MIDI, USB or not. If you send the recorded MIDI from SONAR to your Yamaha, then the MIDI is played with Yamahas sounds. If you use softsynths, their sounds are used inside SONAR. In those cases you can change the sounds after recording. If you record audio from Yamaha, then the sound is fixed and cannot be changed.

    SONAR PE 8.5.3, Asus P5B, 2,4 Ghz Dual Core, 4 Gb RAM, GF 7300, EMU 1820, Bluetube Pre  -  Kontakt4, Ozone, Addictive Drums, PSP Mixpack2, Melda Creative Pack, Melodyne Plugin etc.
    The benefit of being a middle aged amateur is the low number of years of frustration ahead of you.
    #5
    jehrenfeld
    Max Output Level: -90 dBFS
    • Total Posts : 3
    • Joined: 2016/08/14 11:56:49
    • Status: offline
    Re: Playback is playing but there is not output sound 2016/08/22 09:10:56 (permalink)
    Thanks Kalle. I get that MIDI is MIDI I guess my confusion comes in with the audio interface. I have a MIDI cable going from my Yamaha to the Motu audio interface which is connected to the PC via USB. I also have a USB cable going from Yamaha to my PC. I thought I could use the Motu as the I/O for cakewalk since there is a MIDI cable going to it from my Yamaha and the PC is connected to the Motu. In any case, it is working.
    Speaking of SoftSynths I tried laying down a track using a SoftSynth and my Yamaha as the control surface but I was getting the Yamaha sound AND the softsynth at the same time. How do I fix that?
    #6
    Karyn
    Ma-Ma
    • Total Posts : 9200
    • Joined: 2009/01/30 08:03:10
    • Location: Lincoln, England.
    • Status: offline
    Re: Playback is playing but there is not output sound 2016/08/22 10:40:59 (permalink)
    Disable the Audio input from the Yamaha, you need Midi only (which you assign to the soft synth)
     

    Mekashi Futo. 
    Get 10% off all Waves plugins.
    Current DAW.  i7-950, Gigabyte EX58-UD5, 12Gb RAM, 1Tb SSD, 2x2Tb HDD, nVidia GTX 260, Antec 1000W psu, Win7 64bit, Studio 192, Digimax FS, KRK RP8G2, Sonar Platinum

    #7
    Jump to:
    © 2025 APG vNext Commercial Version 5.1