fads
Max Output Level: -88 dBFS
- Total Posts : 117
- Joined: 12/1/2014
- Status: offline
Melodyne Crashing
Any ideas on how I can stop Melodyne from crashing? I have about ten track, only 2 vocals that I am working on. Sometimes it works, but now it seems it crashes almost every time I try to open Melodyne. I do have several track tacks. Could that be a problem?
Using Platinum, Windows, good computer, 32 Gigs of Ram.
Any help is much appreciated.
Thanks
64 bit Windows 8.1 Pro, Intel Core 6 5830K 3.5GHZ 32gb of quad channel ram. Presonus Firestudio Tube, Sonar Platinum, build x3e 4 hard drives C: 1 tb SSD Samsung D: 1 tb WD 7200 rpm E: 2 tb WD 7200 rpm Y: 2 tb WD 7200 rpm https://www.youtube.com/watch?v=BQGIeJcGmxU
|
Tunerman
Max Output Level: -87 dBFS
- Total Posts : 186
- Joined: 3/18/2010
- Location: Northern California
- Status: offline
Re: Melodyne Crashing
September 13, 16 1:54 PM
(permalink)
Did you increase your buffers to 1024? This is what Melodyne recommends. In fact I get a warning telling me to raise the buffers when I fire up Melodyne . Others here have gotten by with less, so YRMV.
“When I sit at my worm-eaten piano, I envy no king in his happiness" -F.J.Haydn Sonar Platinum v22.9.2; W10-64; i7,950,3.06Gz;12GB ram;Korg BX3; Korg M1; Roland FP dp. Two grand pianos: 1929 Steinway M 5'7" & a 1913 Steinway B 6'11"; Focusrite PRO24 & 18i8; Yamaha NS10M, JBL LRS305. "Myrna's Love" - Slide show movie of a piano rebuilding process, with original music, recorded using Sonar 8.5. http://www.youtube.com/watch?v=ANU-lrom_Y0
|
Sanderxpander
Max Output Level: -36.5 dBFS
- Total Posts : 3873
- Joined: 9/30/2013
- Status: offline
Re: Melodyne Crashing
September 13, 16 2:36 PM
(permalink)
Keeping only one instance open and bouncing to clips everything you've edited helps for me, annoying as that is. You could clone and archive the original track if you're afraid you need to go back.
|
superdan54
Max Output Level: -80 dBFS
- Total Posts : 526
- Joined: 2/10/2006
- Location: BanjoLand, USA
- Status: offline
Re: Melodyne Crashing
September 13, 16 6:24 PM
(permalink)
|
dwardzala
Max Output Level: -61 dBFS
- Total Posts : 1470
- Joined: 5/26/2008
- Status: offline
Re: Melodyne Crashing
September 13, 16 6:52 PM
(permalink)
Also, make sure you render the region after you are done editing it in Melodyne.
DaveMain Studio- Core i5 @2.67GHz, 16Gb Ram, (2) 500Gb HDs, (1) 360 Gb HD MotU Ultralite AVB, Axiom 49 Midi Controller, Akai MPD18 Midi Controller Win10 x64 Home Sonar 2017.06 Platinum (and X3e, X2c, X1d) Mobile Studio - Sager NP8677 (i7-6700HQ @2.67MHz, 16G Ram, 250G SSD, 1T HD) M-Box Mini v. 2 Win 10 x64 Home Sonar 2016.10 Platinum Check out my original music: https://soundcloud.com/d-wardzala/sets/d-wardzala-original-music
|
fads
Max Output Level: -88 dBFS
- Total Posts : 117
- Joined: 12/1/2014
- Status: offline
Re: Melodyne Crashing
September 14, 16 6:36 AM
(permalink)
Tunerman
Did you increase your buffers to 1024? This is what Melodyne recommends. In fact I get a warning telling me to raise the buffers when I fire up Melodyne . Others here have gotten by with less, so YRMV.
Thank you for the suggestion. My buffers are already set to 1024, 48K. I can increase it to 2048. Don't know if that will be too much.
64 bit Windows 8.1 Pro, Intel Core 6 5830K 3.5GHZ 32gb of quad channel ram. Presonus Firestudio Tube, Sonar Platinum, build x3e 4 hard drives C: 1 tb SSD Samsung D: 1 tb WD 7200 rpm E: 2 tb WD 7200 rpm Y: 2 tb WD 7200 rpm https://www.youtube.com/watch?v=BQGIeJcGmxU
|
LJB
Max Output Level: -60 dBFS
- Total Posts : 1502
- Joined: 7/29/2009
- Location: South Africa
- Status: offline
Re: Melodyne Crashing
September 14, 16 6:41 AM
(permalink)
I reported a Melodyne Essential issue where the second Melodyne clip in an audio track crashes SPLAT. It's MASSIVELY annoying. Please keep reporting this on the correct lines so we can get this issue solved. My work-around is to have a dummy track where I drag a clip to Melodyne it. Once it's tuned, it seems kinda-OK to go join the others on the original audio track. Seems to be a launch issue or region FX issue on initial startup of a new clip.
post edited by LJB - September 14, 16 7:03 AM
Ludwig Bouwer, One Big Room Studios.
--------------------
Cakewalk with all the trimmings / Win 10Pro 64 / Intel i7-7700 / Asus Prime Z270k / 16GB DDR4 / RME HDSP9652 / RME UFX / Black Lion Audio ADA8000 / ART MPA & ART Pro Channel / Focusrite Voicemaster Pro / Aphex 107
Check out my work at www.onebigroom.co.za
|
fads
Max Output Level: -88 dBFS
- Total Posts : 117
- Joined: 12/1/2014
- Status: offline
Re: Melodyne Crashing
September 14, 16 6:44 AM
(permalink)
Sanderxpander
Keeping only one instance open and bouncing to clips everything you've edited helps for me, annoying as that is. You could clone and archive the original track if you're afraid you need to go back.
Thank you, I will give this a try. Never did the archive before. I am sure I can figure that out. I usually so have all of the windows open, and it does seem to happen after I have done a few Melodyne edits. I will let the forum know how I make out. Sure hope I can get it working. I have lost a lot of work because I get so involved, and sometimes forget to do a save and loose all back to the last save. I wonder if there there a way to recover recent takes that had not been saved?
64 bit Windows 8.1 Pro, Intel Core 6 5830K 3.5GHZ 32gb of quad channel ram. Presonus Firestudio Tube, Sonar Platinum, build x3e 4 hard drives C: 1 tb SSD Samsung D: 1 tb WD 7200 rpm E: 2 tb WD 7200 rpm Y: 2 tb WD 7200 rpm https://www.youtube.com/watch?v=BQGIeJcGmxU
|
fads
Max Output Level: -88 dBFS
- Total Posts : 117
- Joined: 12/1/2014
- Status: offline
Re: Melodyne Crashing
September 14, 16 6:45 AM
(permalink)
LJB
I reported a Melodyne Essential issue where the second Melodyne clip in an audio track crashes SPLAT. It's MASSIVELY annoying. Please keep reporting this on the correct lines so we can get this issue solved.
My work-around is to have a dummy track where I drag a clip to Melodyne it. Once it's tuned, it seems kinda-OK to go join the others on the original audio track. Seems to be a launch issue or region FX issue on initial startup of a new clip.
Is this a bug in Melodyne?
64 bit Windows 8.1 Pro, Intel Core 6 5830K 3.5GHZ 32gb of quad channel ram. Presonus Firestudio Tube, Sonar Platinum, build x3e 4 hard drives C: 1 tb SSD Samsung D: 1 tb WD 7200 rpm E: 2 tb WD 7200 rpm Y: 2 tb WD 7200 rpm https://www.youtube.com/watch?v=BQGIeJcGmxU
|