Helpful ReplyHeadphones for Mixing

Author
polarbear
Max Output Level: -66 dBFS
  • Total Posts : 1212
  • Joined: 2005/04/24 16:20:47
  • Location: Las Vegas
  • Status: offline
2016/10/21 10:37:08 (permalink)

Headphones for Mixing

Hey Everyone,
 
So I have a question... I obviously jump back and forth between my headphones (Sennheiser HD380Pro) and my monitors (Event TR8, which are in need of a replacement after over 10 years but that's another post) for mixing and mastering... Then I go take the music and test it in my car and stereo and favorite headphones and blahblahblah...
 
LATELY though I've been doing the majority of my mixing/mastering in my headphones...
 
For the MOST part I get good results and things sound how they're supposed to and of course I end up having to go back and make tweaks like all of us do to make sure it sounds as good as possible everywhere, but for the most part I'm getting a good representation of what things sound like.
 
But sometimes the results are SO off. The biggest version of SO off appears when a song has that headache inducing sound in the car. It's hard to describe but all the sudden you start feeling like crap while listening to it haha. I've had that happen a few times and it just doesn't happen in my home studio. But it's not just that... It could be like the drums are way too loud in the car or you can barely hear this one instrument in my stereo. You guys all know how that is.
 
So I guess my question is... a) What headphones are you guys using for the most accurate mix? and b) any particular hints for the headache thing for those that have ever run into that one :-)
 
David

http://www.bydavidrosen.com
http://www.imdb.me/davidrosen
Winner of Best Song of 2007 at Acidplanet.com!
 
PC Audio Labs Rokbox OB1 - Gigabyte X99-UD4-CF - Intel Core i7 5820K @ 3.30GHz - 32GB RAM - ATI Radeon HD 7700 - Windows 7 Pro
Sonar Platinum - Komplete 9 Ultimate - Spectrasonics Omnisphere - reFX Nexus2 - And the list goes on...
RME BabyFace Pro - M-Audio Keystation 88es
#1
patm300e
Max Output Level: -74 dBFS
  • Total Posts : 845
  • Joined: 2007/09/28 09:14:18
  • Location: USA - Maryland
  • Status: offline
Re: Headphones for Mixing 2016/10/21 12:37:27 (permalink)
Believe it or not I am using Superlux HD681s (<$30.00)!
 
https://www.amazon.com/Superlux-681-Dynamic-Semi-Open-Headphones/dp/B002GHIPYI/ref=sr_1_1?ie=UTF8&qid=1473851331&sr=8-1&keywords=superlux+hd681
 
Oh and I use the Sonarworks with the curve for the HD681s.  It just works.
 
http://sonarworks.com/headphones/overview/

SPLAT on a Home built i3 16 GB RAM 64-bit Windows 10 Home Premium 120GB SSD (OS) 2TB Data Drive.  Behringer XR-18 USB 2.0 Interface. FaderPort control.
#2
Vastman
Max Output Level: -50 dBFS
  • Total Posts : 2508
  • Joined: 2006/08/30 02:49:18
  • Location: Oakland, CA
  • Status: offline
Re: Headphones for Mixing 2016/10/21 14:56:10 (permalink)
Hey, David... a number of us use KRK KNS 8400's.  I selected them because they are considered among the flatest on the market.  Additionally, you should run Sonarworks in the master bus to insure optimal mix eq... Sonarworks has profiled the 8400s and it has made a huge improvement in my final mixes.  Others here agree... Many of us rely on it to better translate headphone mixing.  If you wanna go all whole hog they will even profile your specific pair of headphones...
 
Btw, U got Tundra yet? Working on a makeshift studio at the moment as I'm relocating but oh my, Spitfire again opens new territory!

Dana
We make the future... Climate Change Music
VastMaschine:SP4L/W10/i74930K/32GB/RME/CAD E100s; The Orchestra! NOVO!/Inspire/BohemianViolin&Cello, ARK1&2,/MinimalCapriccioMaximoSoto/OE1&2, Action&Emotive/Omni2/Tril/RMX/All OrangeTree/Falcon/APE Jugs/Alpha&Bravo/BFD3 & SD3
Gravity/DM307/AEON/DM/Damage/Diva/HZebra/Hive/Diversion/VC4/Serum/Alchemy/blablabla
Spitfire/8DIO/SL/KH/EW/NI; Shred1&2/AGF,G,M&T Torch&Res&Ren/GD-6; Ibanez SR1200&SR505
NOVAX FanFret Tele&Strat 
#3
bluzdog
Max Output Level: -56 dBFS
  • Total Posts : 1928
  • Joined: 2007/10/06 17:15:14
  • Location: Lakewood, Colorado
  • Status: offline
Re: Headphones for Mixing 2016/10/21 16:14:18 (permalink)
BeyerDynamic DT770 Pro 80 ohm and/or AT ATHM50 with SonarWorks or Focusrite VRM box.
 
Rocky
#4
jadonx
Max Output Level: -88 dBFS
  • Total Posts : 102
  • Joined: 2009/03/18 05:50:41
  • Location: North Yorkshire, England
  • Status: offline
Re: Headphones for Mixing 2016/10/21 17:08:00 (permalink)
bluzdog
BeyerDynamic DT770 Pro 80 ohm and/or AT ATHM50 with SonarWorks or Focusrite VRM box.
 
Rocky


+ 1 Audio-technica ATH-M50
#5
Zargg
Max Output Level: 0 dBFS
  • Total Posts : 10666
  • Joined: 2014/09/28 04:20:14
  • Location: Norway
  • Status: offline
Re: Headphones for Mixing 2016/10/21 17:32:30 (permalink)
Hi. I am very pleased with my BeyerDynamic DT770 Pro 80 ohm. They are comfortable to wear for hours. I also have a set of AKG K240, which are ok, but give me headache after a short while.
All the best.

Ken Nilsen
Zargg
BBZ
Win 10 Pro X64, Cakewalk by Bandlab, SPlat X64, AMD AM3+ fx-8320, 16Gb RAM, RME Ucx (+ ARC), Tascam FW 1884, M-Audio Keystation 61es, *AKAI MPK Pro 25, *Softube Console1, Alesis DM6 USB, Maschine MkII
Laptop setup: Win 10 X64, i5 2.4ghz, 8gb RAM, 320gb 7200 RPM HD, Focusrite Solo, + *
 
#6
TheMaartian
Max Output Level: -47.5 dBFS
  • Total Posts : 2774
  • Joined: 2015/05/21 18:30:52
  • Location: Flagstaff, AZ
  • Status: offline
Re: Headphones for Mixing 2016/10/21 18:25:17 (permalink)
a) What headphones are you guys using for the most accurate mix?
 
I love my DT880s. Very comfortable. And I like the "air" of a semi-open back set of cans for mixing.
 
b) any particular hints for the headache thing for those that have ever run into that one :-)
 
Not on anything I've done, but one album in particular is pain inducing when played in my Subie Forester over a 440 watt HK system, Que Pasa by Babe Ruth. [If you're unfamiliar with them, check out their first album "First Base", six awesome songs, including a great cover of Zappa's "King Kong".] It's like they drove the entire mix at full speed into a brick wall (limiter), then backed up and did it again. And again. And again. Loud as hell. Almost no dynamics, but it sure does pump the sub, which pumps the entire enclosed volume of the car. I just can't listen to it at a desirable volume without pain.
 
The loudness and drug wars are both complete failures. Sigh. Geez, but I want to love that album. 
 

Intel i7 3.4GHz, 16 GB RAM, 2 TB HD Win10 Home 64-bit Tascam US-16x08
Studio One 4 Pro NotionMelodyne 4 Studio Acoustica 7 Guitar Pro 7
PreSonus FaderPort Nektar P6 M-Audio BX8 D2 Beyerdynamic DT 880 Pro
NI K9U XLN AK, AD2 AAS VS-2, GS-2, VA-2, EP-4, CP-2, OD Toontrack SD3, EZK
#7
djwayne
Max Output Level: -55 dBFS
  • Total Posts : 2021
  • Joined: 2005/08/07 17:27:09
  • Location: USA
  • Status: offline
Re: Headphones for Mixing 2016/10/21 18:42:13 (permalink)
I had a similar situation last week, I explored many different headphones and ended up with the Sennheiser HD650's...I got a great deal on an open box set, that are just like new. I just received them yesterday, and spent the day trying them out. On commercial recordings they sounded great. On my mixes with known problems, the problems stood out like a sore thumb. This is exactly what I wanted. I feel these will be excellent headphones for mixing and mastering. They are very comfortable. I'm very happy with them.
#8
bitflipper
01100010 01101001 01110100 01100110 01101100 01101
  • Total Posts : 26036
  • Joined: 2006/09/17 11:23:23
  • Location: Everett, WA USA
  • Status: offline
Re: Headphones for Mixing 2016/10/21 22:54:45 (permalink)
I have a theory about your headache-inducing car sound: it's your car's fault.
 
Seriously. Car stereos universally have horrible bass response. It has to do with the intentional manipulation of frequency response by the stereo itself, but mostly it's an acoustical problem. No matter how much money you've spent on aftermarket speakers, it's physically impossible to have flat bass in a car. The volume of air is too small, there are too many resonant cavities, too many reflective surfaces, and too little low-frequency absorption.
 
But, you say, I have commercial CDs that sound OK in my car. That's because they've been mixed and mastered in a very flat listening environment. Headphones are not flat. Even good ones lie. Even the ones that sound "good". Especially the ones that sound "good".
 
Your only hope is to train your ears to mitigate the headphones' defects, and you don't achieve that by listening to your own stuff on them, but by devoting many hours listening to quality commercial references through them. It's not a theory, it's a real psychological phenomenon; over time your subconscious will just know when your mix is right.
 
If you're using headphones just for mixing in a quiet room (not using them for tracking, not monitoring while a band is playing in the next room, not mixing in bed next to a sleeping spouse) then open-back or semi-open headphones will deliver a much flatter response than closed-back cans. 


All else is in doubt, so this is the truth I cling to. 

My Stuff
#9
polarbear
Max Output Level: -66 dBFS
  • Total Posts : 1212
  • Joined: 2005/04/24 16:20:47
  • Location: Las Vegas
  • Status: offline
Re: Headphones for Mixing 2016/10/22 11:07:09 (permalink) ☄ Helpfulby Song Smith Steve 2016/10/24 05:52:10
I'm gonna take a look into all the headphones recommended here... But I'm curious this Sonarworks software. So this is something I put on my master bus (I'm assuming after Ozone since that's what I master with) and then do my work... Do I then remove/bypass it before exporting? I'm curious how it works. I'd assume that there's not settings within it that I'm trying to affect the actual audio with, and it's more for how I get to hear it in my headphones right? Sounds really interesting.
 
Thanks guys.
 
And yea as for that headache thing... It's so bizarre. It definitely does seem to be mainly my car, but I've found some of my just listening headphones have the effect too... Just not my studio monitors or headphones. And it's never detectable in the studio. Everything sounds great and looks great, but then I take it to the car and it's like "Oh man I gotta pull over..." Haha. It's not even loud! It's like I'm coming across some hidden frequency like the brown noise on South Park that makes you crap your pants haha. And it's only ever happened in the 100s of songs I've made, on 3 songs... So it's definitely not a common thing... It just happens to be happening on one song on my new album and I'm thinking what I'm gonna do today is just remove all the effects and Ozone and start over on mixing it cause it's bugging me haha.

http://www.bydavidrosen.com
http://www.imdb.me/davidrosen
Winner of Best Song of 2007 at Acidplanet.com!
 
PC Audio Labs Rokbox OB1 - Gigabyte X99-UD4-CF - Intel Core i7 5820K @ 3.30GHz - 32GB RAM - ATI Radeon HD 7700 - Windows 7 Pro
Sonar Platinum - Komplete 9 Ultimate - Spectrasonics Omnisphere - reFX Nexus2 - And the list goes on...
RME BabyFace Pro - M-Audio Keystation 88es
#10
batsbrew
Max Output Level: 0 dBFS
  • Total Posts : 10037
  • Joined: 2007/06/07 16:02:32
  • Location: SL,UT
  • Status: offline
Re: Headphones for Mixing 2016/10/22 11:41:16 (permalink)
i never 'mix' with headphones.
 
never.
 
never.
 
i always 'check' mixes with headphones, earbuds, and small mono boombox type speakers.
 
headphones are good for 'clinical' editing, tweaking specific problems.
 
but i never hear 'pure' headphone mixes that translate correctly on all platforms.
 
 
 
that said, i really dig my AKG 240's, they are cheap but excellent in sound

Bats Brew music Streaming
Bats Brew albums:
"Trouble"
"Stay"
"The Time is Magic"
--
Sonar 6 PE>Bandlab Cakewalk>Studio One 3.5>RME BFP>i7-7700 3.6GHz>MSI B250M>G.Skill Ripjaws 4 series 16GB>Samsung 960 EVO m.2ssd>W 10 Pro
 
#11
Vastman
Max Output Level: -50 dBFS
  • Total Posts : 2508
  • Joined: 2006/08/30 02:49:18
  • Location: Oakland, CA
  • Status: offline
Re: Headphones for Mixing 2016/10/24 00:33:12 (permalink)
Hi, David... yes... you bypass it for export.
They have a free trial.  Might wanna see if the headphones ur considering have been modeled by Sonarworks...
There are several threads on this, all very positive. Search in all forums.

Dana
We make the future... Climate Change Music
VastMaschine:SP4L/W10/i74930K/32GB/RME/CAD E100s; The Orchestra! NOVO!/Inspire/BohemianViolin&Cello, ARK1&2,/MinimalCapriccioMaximoSoto/OE1&2, Action&Emotive/Omni2/Tril/RMX/All OrangeTree/Falcon/APE Jugs/Alpha&Bravo/BFD3 & SD3
Gravity/DM307/AEON/DM/Damage/Diva/HZebra/Hive/Diversion/VC4/Serum/Alchemy/blablabla
Spitfire/8DIO/SL/KH/EW/NI; Shred1&2/AGF,G,M&T Torch&Res&Ren/GD-6; Ibanez SR1200&SR505
NOVAX FanFret Tele&Strat 
#12
Eddie TX
Max Output Level: -68 dBFS
  • Total Posts : 1104
  • Joined: 2012/08/15 11:47:42
  • Status: offline
Re: Headphones for Mixing 2016/10/24 02:12:01 (permalink)
Anyone shopping for new headphones that are a step up from basic $100 cans might want to look at the planar magnetic technology from the likes of Audeze and HifiMan. They have received rave reviews from people who love great 'phone sound. Even Monoprice recently announced a couple of models. They look suspiciously like similar Audezes, but at a much lower price. Should be available soon.
 
Cheers,
Eddie
 
 
 

Sonar X3 Producer / Win 10 
The future exists in all directions.
#13
Vastman
Max Output Level: -50 dBFS
  • Total Posts : 2508
  • Joined: 2006/08/30 02:49:18
  • Location: Oakland, CA
  • Status: offline
Re: Headphones for Mixing 2016/10/24 23:02:42 (permalink)
Reddit has some issues with Audeze...  More Reddit discussion on the tech... 
Big bucks...heavy... don't sit on head very well...
still exploring Eddie...
 
Nice info on HeadFi on the HE4s, 400s, 500s...

Dana
We make the future... Climate Change Music
VastMaschine:SP4L/W10/i74930K/32GB/RME/CAD E100s; The Orchestra! NOVO!/Inspire/BohemianViolin&Cello, ARK1&2,/MinimalCapriccioMaximoSoto/OE1&2, Action&Emotive/Omni2/Tril/RMX/All OrangeTree/Falcon/APE Jugs/Alpha&Bravo/BFD3 & SD3
Gravity/DM307/AEON/DM/Damage/Diva/HZebra/Hive/Diversion/VC4/Serum/Alchemy/blablabla
Spitfire/8DIO/SL/KH/EW/NI; Shred1&2/AGF,G,M&T Torch&Res&Ren/GD-6; Ibanez SR1200&SR505
NOVAX FanFret Tele&Strat 
#14
Jesse G
Max Output Level: -32.5 dBFS
  • Total Posts : 4282
  • Joined: 2004/04/14 01:43:43
  • Status: offline
Re: Headphones for Mixing 2016/10/25 20:24:10 (permalink)
Hey, you won't find a better deal on this Planet !! 
 
Pay no attention to the seller.  KRK KNS8000 for $100.00

Peace,
Jesse G. A fisher of men  <><
==============================
Cakewalk and I are going places together!

Cakewalk By Bandlab, Windows 10 Pro- 64 bit, Gigabyte GA-Z97X-SLI, Intel Core i5-4460 Haswell Processor, Crucial Ballistix 32 GB Ram, PNY GeForce GTX 750, Roland Octa-Capture, Mackie Big Knob, Mackie Universal Controller (MCU), KRK V4's, KRK Rockit 6, Korg TR-61 Workstation, M-Audio Code 49 MIDI keyboard controller.[/
#15
synkrotron
Max Output Level: -22.5 dBFS
  • Total Posts : 5263
  • Joined: 2006/04/28 16:21:21
  • Location: Warrington, UK
  • Status: offline
Re: Headphones for Mixing 2016/10/27 03:49:33 (permalink)
Mmmm... I suppose I should take advantage of the three week Sonarworks trial...

http://www.synkrotron.co.uk/
Intel Core™i7-3820QM Quad Core Mobile Processor 2.70GHz 8MB cache | Intel HM77 Express Chipset | 16GB SAMSUNG 1600MHz SODIMM DDR3 RAM | NVIDIA GeForce GTX 675M - 2.0GB DDR5 Video RAM | 500GB Samsung 850 Pro SSD | 1TB Samsung 850 Pro SSD | Windows 10 Pro | Roland OCTA-CAPTURE | SONAR Platinum ∞ FFS| Too many VSTi's to list here | KRK KNS-8400 Headphones | Roland JP-8000 | Oberheim OB12 | Novation Nova | Gibson SG Special | PRS Studio
#16
LLyons
Max Output Level: -79 dBFS
  • Total Posts : 574
  • Joined: 2004/08/25 12:48:39
  • Status: offline
Re: Headphones for Mixing 2016/10/28 00:07:38 (permalink)
I have a pair of DT880 pros.   Not too bad, comfortable - but they are not exactly flat.  I use a MOTU AVB unit and it has more than enough power to fatigue my ears fast.  The open back helps a bit with bass build up, but the ear mind thing could not 'learn' how they translated into the mix all the time. 
 
I picked up a pair of DT1770s and somehow, they clicked with that ear mind thing.  When I hear something in the mix, I know how it might translate to a variety of devices.  They have a nice wide stage, fairly even response, comfortable...  Not top end mind you, but they are pretty good for the price.  I think they are worth checking out. 
 
Like others have said - I prefer using both monitors and headphones.  
 
LL 

L Lyons 
DOS and Windows Pro Audio 2-9 from 12 Tone, Sonar 2, 2XL, 3, 4, 5, 7, 8, 8.5, Producer, Producer Expanded, X1 Producer, X2 Producer, X3 Producer and now Sonar Platinum 64 bit - 2nd year
Home Built Machine
32G Ram - Corsair Vengeance DDR4 
Win 10 Pro
Intel i7-6700K
Gigabyte Z170-UD5 Thunderbolt3 - AVB ready
Planar Hellium 27 touchscreen
Limited connection to internet
DAW use ONLY
WAVES 9.2 64 Bit 
MOTU 1248 - Connect Thunderbolt
MOTU AVB Switch
Presonus RM32ai - Connect firewire 800
CS18ai - Connect AVB
#17
rowens
Max Output Level: -90 dBFS
  • Total Posts : 7
  • Joined: 2016/11/05 02:33:51
  • Status: offline
Re: Headphones for Mixing 2016/11/05 02:39:26 (permalink)
You can try studio headphones or professional headphones.
#18
Jump to:
© 2024 APG vNext Commercial Version 5.1