yorolpal
Max Output Level: 0 dBFS
- Total Posts : 13829
- Joined: 2003/11/20 11:50:37
- Status: offline
FaderPort no longer working after latest SPLAT update...SOLVED
Just updated to the newest SPLAT release. Oddly it started up with some new screens that had me reset all my audio and midi settings/instruments/control surfaces. At first it didn't want to see my midi controller keyboard but after several tries finally did. After going through the preferences section and resetting all my audio and midi and surface controllers back to where they were I have everything (Maschine, NanoKontrol, Alesis QS8) working EXCEPT my FaderPort. It shows up in the control surface screen and my midi controllers but is not working at all. Any help anyone could give will be greatly appreciated. I suspect these new setup screens are part of the "Lenses" thingy which I haven't discovered yet. Perhaps not. In any case, I'd like to have my FaderPort back. IIRC it was a bee-atch to get working in the first place. Thanks.
post edited by yorolpal - 2016/12/05 14:27:31
|
pwalpwal
Max Output Level: -43 dBFS
- Total Posts : 3249
- Joined: 2015/01/17 03:52:50
- Status: offline
Re: FaderPort no longer working after latest SPLAT update...
2016/12/01 14:52:40
(permalink)
yorolpalnew screens that had me reset all my audio and midi settings/instruments/control surfaces.
is this something that might be fixed by a rollback to the previous version, ol pal? sorry, no help, but good luck!
|
BobF
Max Output Level: 0 dBFS
- Total Posts : 8124
- Joined: 2003/11/05 18:43:11
- Location: Missouri - USA
- Status: offline
Re: FaderPort no longer working after latest SPLAT update...
2016/12/01 14:58:36
(permalink)
My FaderPort is continuing to be Supreme. I use Az Ctrl if that matters any
If you have another DAW app that also uses the FP, try starting and exiting that app to see if the FP wakes up.
Bob -- Angels are crying because truth has died ...Illegitimi non carborundum --Studio One Pro / i7-6700@3.80GHZ, 32GB Win 10 Pro x64 Roland FA06, LX61+, Fishman Tripleplay, FaderPort, US-16x08 + ARC2.5/Event PS8s Waves Gold/IKM Max/Nomad Factory IS3/K11U
|
Ibanez Laney
Max Output Level: -89 dBFS
- Total Posts : 79
- Joined: 2014/12/28 03:38:07
- Location: Sydney
- Status: offline
Re: FaderPort no longer working after latest SPLAT update...
2016/12/01 20:51:21
(permalink)
I can't use my Faderport with the new patch either.
It gives a 'not enough memory' error when I try to enable it.
i7 2600k, 1 x Nvidia 970 + 1 x 560ti, 16GB RAM, 5TB of Spinning Thingys, Focusrite Liquid Sapphire 56 + lots and lots of cables. Sooo many cables.. I think they are breeding.
|
southpaw3473
Max Output Level: -75 dBFS
- Total Posts : 782
- Joined: 2008/04/22 16:50:41
- Location: Western MA
- Status: offline
Re: FaderPort no longer working after latest SPLAT update...
2016/12/01 21:25:59
(permalink)
I have a Berhringer keyboard controller that just gave a "Not Enough Memory" error as well. Weird!!
We'll not risk another frontal assault-that rabbit's dynamite!!!
Tommy Byrnes Sonar Platinum Win 10 Pro x64 AMD FX 8350 Eight-Core 4.00GHz/ ASRock 970 Extreme4/ 16 gigs RAMUA Apollo Firewire/UA 2 Quad Satellite/ Focusrite OctoPre/Makie Onyx1220i Mixer THANK YOU!!!
|
gustabo
Max Output Level: -49.5 dBFS
- Total Posts : 2591
- Joined: 2009/01/05 17:32:38
- Status: offline
Re: FaderPort no longer working after latest SPLAT update...
2016/12/01 21:40:55
(permalink)
Mine works great too but I am using AZ-Control too.
Cakewalk by Bandlab - Win10 Pro x64 - StudioCat Platinum Studio DAW - 32 GB Ram - MOTU UltraLite-mk3
M-Audio Keystation 88ES - Akai MPD26 (hot-rodded) - Alesis DM10 - a few guitars, a few amps
Novation Launch Control - Korg nanoKONTROL2 - PreSonus FaderPort - DAW Remote HD on iPad
Adam A7X - Behritone C50A
PreSonus Monitor Station v2 (controlling the mons)
https://www.facebook.com/groups/sonarusergroup/
|
Ibanez Laney
Max Output Level: -89 dBFS
- Total Posts : 79
- Joined: 2014/12/28 03:38:07
- Location: Sydney
- Status: offline
Re: FaderPort no longer working after latest SPLAT update...
2016/12/01 22:01:58
(permalink)
I might try rolling back - Settting it up using AZ-Control and then re-updating because I can't select 'Faderport' as an in and out in preferences to change it since the patch - That's when it gives the error.
Hopefully it is fixed soon - I prefer running it without AZ-Control.
The Fader port doesn't turn off when I close Sonar when I use AZ-Control.
i7 2600k, 1 x Nvidia 970 + 1 x 560ti, 16GB RAM, 5TB of Spinning Thingys, Focusrite Liquid Sapphire 56 + lots and lots of cables. Sooo many cables.. I think they are breeding.
|
KingsMix
Max Output Level: -81 dBFS
- Total Posts : 498
- Joined: 2015/08/20 00:56:10
- Status: offline
Re: FaderPort no longer working after latest SPLAT update...
2016/12/02 00:27:47
(permalink)
Thanks for the heads up. Puts the update on the back burner for me.
Hopeful for a fix though.
|
Ibanez Laney
Max Output Level: -89 dBFS
- Total Posts : 79
- Joined: 2014/12/28 03:38:07
- Location: Sydney
- Status: offline
Re: FaderPort no longer working after latest SPLAT update...
2016/12/02 02:43:08
(permalink)
Update:
Now it is magically working.
I didn't 'fix' anything - It just decided to start working.
i7 2600k, 1 x Nvidia 970 + 1 x 560ti, 16GB RAM, 5TB of Spinning Thingys, Focusrite Liquid Sapphire 56 + lots and lots of cables. Sooo many cables.. I think they are breeding.
|
tenfoot
Max Output Level: -53.5 dBFS
- Total Posts : 2186
- Joined: 2015/01/22 18:12:07
- Location: Qld, Australia
- Status: offline
Re: FaderPort no longer working after latest SPLAT update...
2016/12/02 04:06:01
(permalink)
My faderport stopped working after the last update as well. Rolled back using a disc image and it lives again!
Bruce. Sonar Platinum 2017-09, Studio One 3.5.3, Win 10 x64, Quad core i7, RME Fireface, Behringer X32 Producer, Behringer X32 Rack, Presonus Faderport, Lemure Software Controller (Android), Enttec DMXIS VST lighting controller, Xtempo POK.
|
yorolpal
Max Output Level: 0 dBFS
- Total Posts : 13829
- Joined: 2003/11/20 11:50:37
- Status: offline
Re: FaderPort no longer working after latest SPLAT update...
2016/12/02 14:21:02
(permalink)
Guess I'll either have to wait for a fix or Google Az Ctrl:-)
|
BobF
Max Output Level: 0 dBFS
- Total Posts : 8124
- Joined: 2003/11/05 18:43:11
- Location: Missouri - USA
- Status: offline
Re: FaderPort no longer working after latest SPLAT update...
2016/12/02 14:34:27
(permalink)
Bob -- Angels are crying because truth has died ...Illegitimi non carborundum --Studio One Pro / i7-6700@3.80GHZ, 32GB Win 10 Pro x64 Roland FA06, LX61+, Fishman Tripleplay, FaderPort, US-16x08 + ARC2.5/Event PS8s Waves Gold/IKM Max/Nomad Factory IS3/K11U
|
tenfoot
Max Output Level: -53.5 dBFS
- Total Posts : 2186
- Joined: 2015/01/22 18:12:07
- Location: Qld, Australia
- Status: offline
Re: FaderPort no longer working after latest SPLAT update...
2016/12/02 19:09:04
(permalink)
You probably have done so already Yorolpal, but just make sure that the update didn't uncheck channel and key aftertouch under Preferences>midi>Playback and recording. I have rolled back due to other issues but I have seen that in the past.
Bruce. Sonar Platinum 2017-09, Studio One 3.5.3, Win 10 x64, Quad core i7, RME Fireface, Behringer X32 Producer, Behringer X32 Rack, Presonus Faderport, Lemure Software Controller (Android), Enttec DMXIS VST lighting controller, Xtempo POK.
|
chuckebaby
Max Output Level: 0 dBFS
- Total Posts : 13146
- Joined: 2011/01/04 14:55:28
- Status: offline
Re: FaderPort no longer working after latest SPLAT update...
2016/12/02 19:49:11
(permalink)
is it possible that the new Lens feature reset some of the settings in Sonar.
I believe Lens uses a lot of Global settings ones that were not used previously for example like Screensets was.
Windows 8.1 X64 Sonar Platinum x64 Custom built: Asrock z97 1150 - Intel I7 4790k - 16GB corsair DDR3 1600 - PNY SSD 220GBFocusrite Saffire 18I8 - Mackie Control
|
yorolpal
Max Output Level: 0 dBFS
- Total Posts : 13829
- Joined: 2003/11/20 11:50:37
- Status: offline
Re: FaderPort no longer working after latest SPLAT update...
2016/12/04 13:38:02
(permalink)
Have got AZslow loaded and will proceed with Bob's link. Fingers crossed:-)
|
yorolpal
Max Output Level: 0 dBFS
- Total Posts : 13829
- Joined: 2003/11/20 11:50:37
- Status: offline
Re: FaderPort no longer working after latest SPLAT update...
2016/12/05 14:27:11
(permalink)
Worked like a charm. Thanks fellers...especially Bob!!
|