thedukewestern
Max Output Level: -83 dBFS
- Total Posts : 387
- Joined: 2008/04/14 12:06:59
- Location: NY
- Status: offline
Copy and Paste problems
I have always had trouble with paste destinations in Splat. It has exhibited somewhat un-intuitive pasting behaviour.... Unless you open the paste special menu, a simple CNTRL V - even if the track is selected, would often send your copied information to a random track destination. I even had customer support on the phone a year and a half ago and the rep really did not know what the problem was.
However todays experience has me very frustrated. Trying to copy a simple measure of midi, like I've been doing for 10 years now, and sonar created a new midi track for every attempt at pasting, and no matter what I did, I could NOT get splat to paste a simple measure of midi into the same track?
Kontakt ->Scarbee mm bass - solo- dim (5 db). Track was armed as I was building the take. All of this is not unusual in my workflow and have NEVER had this many problems with it? Ive searched all over for any kind of mistake I could be making, however have come up short. Going to try a reboot.
Ive noticed - also - that many users on this forum have not done the current update as I am away from home as well.
Be the first one who thinks that you can Sonar Platinum, Windows 7 64 bit - clean install January 2016, Focusrite Pro 40, Outboard Pres, Native Instruments Komplete, Izotope, PSP, Melodyne, Vegetarian
|
jsg
Max Output Level: -69 dBFS
- Total Posts : 1079
- Joined: 2003/11/20 04:54:18
- Location: San Francisco, California
- Status: offline
Re: Copy and Paste problems
2016/12/08 14:30:34
(permalink)
I had to roll back to Splat 22.7 due to the problem you've encountered. When copying material from one track to another, SPLAT 22.8 and later randomly puts the material on the wrong track. It happens in both the event list and the staff view. I've written to Noel Borthwick about the issue, but have not yet received a reply. I've also filed a problem report. When I posted a month or so ago about this issue, another person gave me the tip to roll back to 22.7, which I did, and the problem has not occurred since I did that. jsg www.jerrygerber.com
|
kennywtelejazz
Max Output Level: -3.5 dBFS
- Total Posts : 7151
- Joined: 2005/10/22 06:27:02
- Location: The Planet Tele..X..
- Status: offline
Re: Copy and Paste problems
2016/12/08 15:40:46
(permalink)
I have the most current version of SONAR .. after recording a midi guitar part I right clicked the midi clip to deleted it and SONAR went poof . The whole project disappeared in a flash  maybe not related ...yet I feel you .... Kenny
|
wetdentist
Max Output Level: -68 dBFS
- Total Posts : 1129
- Joined: 2007/04/12 19:06:25
- Location: Bethlehem, PA USA
- Status: offline
Re: Copy and Paste problems
2016/12/08 15:59:37
(permalink)
i can confirm that this happens, sometimes (other times not).
3.5 Ghz AMD 6-Core/16 gigs RAM, Roland Quad-Capture, Win 10, Cakewalk by Bandlab, Komplete 10, z3ta+, Z3TA+ 2, Rapture, Maschine 2.7 (MKI & Jam), Melodyne 4 Studio, Ozone 4, Jam Origin MIDI Guitar 2, Schecter Damien Elite, Fender Sonoran w/TronicalTune Plus installed, etc go here to hear Wet Dentist (2000-2016 RIP) my new sounds: The Das Kaput
|
SquireBum
Max Output Level: -84 dBFS
- Total Posts : 347
- Joined: 2013/06/26 13:23:55
- Status: offline
Re: Copy and Paste problems
2016/12/08 17:42:55
(permalink)
thedukewestern
Unless you open the paste special menu, a simple CNTRL V - even if the track is selected, would often send your copied information to a random track destination.
From my experience and reading the documentation, a simple paste will always be applied to the "Current" or active track. If the "Selected" track is not also the "Current" track, then the paste appears to be random, but I think you will find that the destination is actually the "Current" track. As Jerry has mentioned, starting in SONAR 2016.08 the Destination Track option in Paste Special no longer functions unless your Destination Track happens to be the "Current" track. Until this bug is fixed, Paste Special functions exactly like a simple Paste (Ctrl+V). Hope this helps, -- Ron
post edited by SquireBum - 2016/12/09 00:24:09
Cakewalk by Bandlab, Sonar Platinum x64 2017.10, X3E, X2a, X1d, 8.5 Windows 10 x64 AMD Phenom II X4 955 3.20 GHz 8 GB Ram Nvidia GeForce 9500 GT Echo Gina 3G
|
jsg
Max Output Level: -69 dBFS
- Total Posts : 1079
- Joined: 2003/11/20 04:54:18
- Location: San Francisco, California
- Status: offline
Re: Copy and Paste problems
2016/12/09 03:02:38
(permalink)
SquireBum
thedukewestern
Unless you open the paste special menu, a simple CNTRL V - even if the track is selected, would often send your copied information to a random track destination.
From my experience and reading the documentation, a simple paste will always be applied to the "Current" or active track. If the "Selected" track is not also the "Current" track, then the paste appears to be random, but I think you will find that the destination is actually the "Current" track.
As Jerry has mentioned, starting in SONAR 2016.08 the Destination Track option in Paste Special no longer functions unless your Destination Track happens to be the "Current" track. Until this bug is fixed, Paste Special functions exactly like a simple Paste (Ctrl+V).
Hope this helps,
-- Ron
Excellent and lucid explanation of the exact bug. with versions beyond 22.7, paste-special requires the track that material is being pasted to be the active, or current, track, defeating the purpose of having paste-special, as that is the exact limitation of normal paste. Jerry www.jerrygerber.com
|
Afrodrum
Max Output Level: -79 dBFS
- Total Posts : 559
- Joined: 2012/10/14 15:15:24
- Location: Warszawa
- Status: offline
Re: Copy and Paste problems
2016/12/09 05:32:40
(permalink)
I find "nudge" clip (or track) left-right-up-down a lot more effective and convenient than copy/paste special. When I need to copy/move clips long distances I change nudge settings to higher values in preferences.
Windows 10/64, Intel i7 Xeon X6575 3,07GHz, 24Gb RAM, chipset: Intel X58 Express, Kingston SSD 240Gb, Sonar Platinum ∞, Edirol UA-25. ( Some extra VSTs: PSP almost all/ IK - AT4, ST3, / AAS - all/ TH3 full/ +10dB/ Melodyne Editor). EVE sc205 monitors, Defil Kosmos guitar, blue lava lamp, ashtray. And there is some great music you may find at: https://soundcloud.com/pawel-jan-1
|
thedukewestern
Max Output Level: -83 dBFS
- Total Posts : 387
- Joined: 2008/04/14 12:06:59
- Location: NY
- Status: offline
Re: Copy and Paste problems
2016/12/10 01:15:43
(permalink)
kennywtelejazz
I have the most current version of SONAR ..
after recording a midi guitar part I right clicked the midi clip to deleted it and SONAR went poof .
The whole project disappeared in a flash maybe not related ...yet I feel you ....
Kenny
POOF!!! Ouch!
Be the first one who thinks that you can Sonar Platinum, Windows 7 64 bit - clean install January 2016, Focusrite Pro 40, Outboard Pres, Native Instruments Komplete, Izotope, PSP, Melodyne, Vegetarian
|
kennywtelejazz
Max Output Level: -3.5 dBFS
- Total Posts : 7151
- Joined: 2005/10/22 06:27:02
- Location: The Planet Tele..X..
- Status: offline
Re: Copy and Paste problems
2016/12/13 13:31:36
(permalink)
thedukewestern
kennywtelejazz
I have the most current version of SONAR ..
after recording a midi guitar part I right clicked the midi clip to deleted it and SONAR went poof .
The whole project disappeared in a flash maybe not related ...yet I feel you ....
Kenny
POOF!!! Ouch!
Hi Dave , Yes , true that ... The two times this happened to me , the poof happened so fast I thought I had minimized SONAR and hadn't realized it .... I guess the only thing I had going in my favor at the time was the project was only a little self made tutorial I was trying a few things out within . Thankfully it did revert back to it's older saved state ... all the best , Kenny
|