Percussion Strip noise when transport is stopped

Author
Post
Essentials Only Full Version
gswitz
Max Output Level: -18.5 dBFS
  • Total Posts : 5694
  • Joined: 2007/06/16 07:17:14
  • Location: Richmond Virginia USA
  • Status: offline
2017/01/01 16:02:08 (permalink)

Percussion Strip noise when transport is stopped

https://youtu.be/SLUIm5g-GWI
 
Any ideas why this is?
 
Thanks,

Geoff

StudioCat > I use Windows 10 and Sonar Platinum. I have a touch screen.
I make some videos. This one shows how to do a physical loopback on the RME UCX to get many more equalizer nodes.
#1

2 Replies Related Threads
    brundlefly
    Max Output Level: 0 dBFS
    • Total Posts : 14250
    • Joined: 2007/09/14 14:57:59
    • Location: Manitou Spgs, Colorado
    • Status: offline
    Re: Percussion Strip noise when transport is stopped 2017/01/01 16:39:24 (permalink)
    I can't see any noise coming from Percussion strip alone using Voxengo Span with the scale set all the way down to -135dB.
     
    I would start by putting a dedicated spectrum analyzer directly on the output of the track (i.e. last in the FX bin with Prochannel not set to Post). If you still see the noise, turn off everything after the Percussion Strip, and see if it goes away; there may be some interaction between plugins. If that doesn't get it, try moving Percussion Strip from the FX chain in Prochannel to the FX bin.

    SONAR Platinum x64, 2x MOTU 2408/PCIe-424  (24-bit, 48kHz)
    Win10, I7-6700K @ 4.0GHz, 24GB DDR4, 2TB HDD, 32GB SSD Cache, GeForce GTX 750Ti, 2x 24" 16:10 IPS Monitors
    #2
    gswitz
    Max Output Level: -18.5 dBFS
    • Total Posts : 5694
    • Joined: 2007/06/16 07:17:14
    • Location: Richmond Virginia USA
    • Status: offline
    Re: Percussion Strip noise when transport is stopped 2017/01/01 17:01:59 (permalink)
    It only seems to happen after I play a song through a few times.
     
    Also, I'm not worked up about it. It just looks like a bug.

    StudioCat > I use Windows 10 and Sonar Platinum. I have a touch screen.
    I make some videos. This one shows how to do a physical loopback on the RME UCX to get many more equalizer nodes.
    #3
    Jump to:
    © 2025 APG vNext Commercial Version 5.1