Helpful Reply( SOLVED ) PRV Snap to/by is not cooperating correctly - 2016.10

Author
Post
Essentials Only Full Version
Steve_Karl
Max Output Level: -50 dBFS
  • Total Posts : 2534
  • Joined: 2003/11/06 20:53:26
  • Location: Pittsburgh, PA USA
  • Status: offline
2017/02/02 18:11:44 (permalink)

( SOLVED ) PRV Snap to/by is not cooperating correctly - 2016.10

2016.10
Notes in PRV can't be snapped to the selected (on the top right) Grid.
The "To / By" switch is toggled to "Move To" but I never had to do that in X3 in PRV.
Even so, notes still can't be snapped to the selected (on the top right) Grid.

In X3 with the "Move By" selected,
It would always just snap to the grid selected on the top right,
and also correctly "Move by" when drag copying things that were off the grid.

Smart grid is off, never have had it on in X3, but it doesn't matter.
Same problem with Smart Grid turned on.
If I play a part in and then try to snap to the grid it wants to snap like "Move by" would work in X3
Even when "Move to" is selected.

The work around is to Highlight the problem notes and Quantize them but it's a real pain to have to do
extra steps when it was so easy in X3.

Any thoughts?
Is there a new feature that I'm missing that needs to be turned on or off?

Could this possibly be because I'm using track templates that were created in the previous version?

More info:
I added a new MIDI track, assigned it properly and now snap is working correctly.
So I am guessing that it's related to old track templates created in an older version?

Has anyone else experienced this and OMG I hate to think of having to recreate all of my track templates every time I upgrades sonar.

Is this being addressed anywhere with the updates?
Has it possibly been fixed in a newer version , newer than 20 16.10?

Thank you!
post edited by Steve_Karl - 2017/02/08 04:27:21

Steve Karl
https://soundcloud.com/steve_karl
SPLAT 2017.01
#1
List Solutions Only

8 Replies Related Threads
    Anderton
    Max Output Level: 0 dBFS
    • Total Posts : 14070
    • Joined: 2003/11/06 14:02:03
    • Status: offline
    Re: PRV Snap to/by is not cooperating correctly - 2016.10 2017/02/02 19:37:50 (permalink)
    What happens if you open the old track template in a new version, then save it from the new version?

    The first 3 books in "The Musician's Guide to Home Recording" series are available from Hal Leonard and http://www.reverb.com. Listen to my music on http://www.YouTube.com/thecraiganderton, and visit http://www.craiganderton.com. Thanks!
    #2
    Steve_Karl
    Max Output Level: -50 dBFS
    • Total Posts : 2534
    • Joined: 2003/11/06 20:53:26
    • Location: Pittsburgh, PA USA
    • Status: offline
    Re: PRV Snap to/by is not cooperating correctly - 2016.10 2017/02/02 19:39:48 (permalink)
    Too difficult to test it now.
    I'm in the middle of a project here but that's a thought for the future.
    I'm not even convinced that is happening with every track from the track templates so I'll have to look at that later also but thanks for getting back to me. Good news is I'm back to work on what I was working on and it's working... because I deleted the midi track it was giving me problems and just created a new midi track.
    post edited by Steve_Karl - 2017/02/02 23:19:17

    Steve Karl
    https://soundcloud.com/steve_karl
    SPLAT 2017.01
    #3
    brundlefly
    Max Output Level: 0 dBFS
    • Total Posts : 14250
    • Joined: 2007/09/14 14:57:59
    • Location: Manitou Spgs, Colorado
    • Status: offline
    Re: PRV Snap to/by is not cooperating correctly - 2016.10 2017/02/03 14:11:49 (permalink)
    PRV snap has it's own To/By setting in the resolution drop-down, and unfortunately the Bakers defaulted it to 'By' when it was introduced.

    SONAR Platinum x64, 2x MOTU 2408/PCIe-424  (24-bit, 48kHz)
    Win10, I7-6700K @ 4.0GHz, 24GB DDR4, 2TB HDD, 32GB SSD Cache, GeForce GTX 750Ti, 2x 24" 16:10 IPS Monitors
    #4
    Steve_Karl
    Max Output Level: -50 dBFS
    • Total Posts : 2534
    • Joined: 2003/11/06 20:53:26
    • Location: Pittsburgh, PA USA
    • Status: offline
    Re: PRV Snap to/by is not cooperating correctly - 2016.10 2017/02/04 09:21:11 (permalink)
    brundlefly
    PRV snap has it's own To/By setting in the resolution drop-down, and unfortunately the Bakers defaulted it to 'By' when it was introduced.


    Wow ... I forgot all about that. Maybe that was the problem.
    I'll remember that it's there now.
    Thank you.

    Steve Karl
    https://soundcloud.com/steve_karl
    SPLAT 2017.01
    #5
    Steve_Karl
    Max Output Level: -50 dBFS
    • Total Posts : 2534
    • Joined: 2003/11/06 20:53:26
    • Location: Pittsburgh, PA USA
    • Status: offline
    Re: PRV Snap to/by is not cooperating correctly - 2016.10 2017/02/04 09:40:46 (permalink)
    Craig Anderton ... very cool tunes!

    The full-length, 12-song "video album"     Neo-Psychedelic Music for the 21st Century is now posted on my YouTube channel - yes, it was all done with SONAR.
     

    Steve Karl
    https://soundcloud.com/steve_karl
    SPLAT 2017.01
    #6
    Steve_Karl
    Max Output Level: -50 dBFS
    • Total Posts : 2534
    • Joined: 2003/11/06 20:53:26
    • Location: Pittsburgh, PA USA
    • Status: offline
    Re: PRV Snap to/by is not cooperating correctly - 2016.10 2017/02/08 04:26:26 (permalink)
    Solved by the snap to / by in the drop-down menu at the top right

    Steve Karl
    https://soundcloud.com/steve_karl
    SPLAT 2017.01
    #7
    dcmg
    Max Output Level: -83 dBFS
    • Total Posts : 393
    • Joined: 2005/02/14 15:35:38
    • Location: Phoenix, AZ.
    • Status: offline
    Re: PRV Snap to/by is not cooperating correctly - 2016.10 2017/02/08 21:10:08 (permalink)
    Your post brought up an interesting point: custom templates built on old SONAR versions.
    It's been my experience that it's worth rebuilding these every few versions, as the templates may have been built on a version whose code is quite a bit different now. I've found more than a few little odd behaviors that are fixed when I build new templates. Anyone else found this, and is this just becoming "best practice" to rebuild those when major revisions in the program occur?

    CWBL/SPlat/Studio One Pro on Win10-64 Bit
    Asrock H370 Pro4 w/Intel i7-8700
    16GB Adata DDR4 2666 RAM
    All SSD's/ On-Board Intel Graphics
    Apollo 8 Quad FW/TB, AD2, Trillian, Omni, S-Gear, Waves, Soundtoys, TRacks, 
    MicPres: Langevin DVC, Great River, UAD LA610Mk2. 
    Dynaudio Monitors, and other stuff.
    #8
    Anderton
    Max Output Level: 0 dBFS
    • Total Posts : 14070
    • Joined: 2003/11/06 14:02:03
    • Status: offline
    Re: PRV Snap to/by is not cooperating correctly - 2016.10 2017/02/09 09:22:52 (permalink) ☄ Helpfulby Steve_Karl 2017/02/09 16:12:15
    Steve_Karl
    Craig Anderton ... very cool tunes!

    The full-length, 12-song "video album"     Neo-Psychedelic Music for the 21st Century is now posted on my YouTube channel - yes, it was all done with SONAR.



    Thanks, I appreciate the props! Starting this weekend I'll be posting songs from the next album on craiganderton.com.

    The first 3 books in "The Musician's Guide to Home Recording" series are available from Hal Leonard and http://www.reverb.com. Listen to my music on http://www.YouTube.com/thecraiganderton, and visit http://www.craiganderton.com. Thanks!
    #9
    Jump to:
    © 2025 APG vNext Commercial Version 5.1