synkrotron
Max Output Level: -22.5 dBFS
- Total Posts : 5263
- Joined: 2006/04/28 16:21:21
- Location: Warrington, UK
- Status: offline
Latest Sonar Update...
I finally got round to updating to the latest version of SPlat tonight. I'd been holding off for a bit after being a little bit put off with some of the minor gripes here.
Anyway, when I started Sonar, it was as though it was being run for the first time, asking me to set up my audio interface, amongst other things, and the Tungsten theme was active, even though I always use Mercury.
From memory, this is the first time this has happened, where I have had to reconfigure hardware and reset my theme back to Mercury.
I was just wondering why... Not a major issue, at least I hope not... I might have a check through some of my other customisations too, like keyboard shortcuts.
http://www.synkrotron.co.uk/Intel Core™i7-3820QM Quad Core Mobile Processor 2.70GHz 8MB cache | Intel HM77 Express Chipset | 16GB SAMSUNG 1600MHz SODIMM DDR3 RAM | NVIDIA GeForce GTX 675M - 2.0GB DDR5 Video RAM | 500GB Samsung 850 Pro SSD | 1TB Samsung 850 Pro SSD | Windows 10 Pro | Roland OCTA-CAPTURE | SONAR Platinum ∞ FFS| Too many VSTi's to list here | KRK KNS-8400 Headphones | Roland JP-8000 | Oberheim OB12 | Novation Nova | Gibson SG Special | PRS Studio
|
biodiode
Max Output Level: -66 dBFS
- Total Posts : 1202
- Joined: 2006/04/13 13:48:09
- Location: Blackpool, UK
- Status: offline
Re: Latest Sonar Update...
2017/02/15 16:51:18
(permalink)
I'm assuming this is the January release and I haven't missed one. When I updated everything ran as normal and I didn't have the same experience as you. Strange!
www.biodiode.com https://soundcloud.com/biodiodePC Specs :-Sonar Platinum, Fractal Design Define R4 Case, Asus X-99 Deluxe motherboard, Intel Core i7 5960X Processor, Bequiet BK010 Dark Rock Cooler, 32GB - 2400mhz Corsair memory, 650W Bequiet Dark Pro PSU, 1GB XFX Radeon R5 Passive GFX, 2 x 256GB Samsung 850 Pro SSD, 1 x 3TB WesterDigital Black HDD, LG - BluRay Combo Drive, Windows 10, Kensington SlimBlade Trackball, LG34UM88C 34-Inch 3440 x 1440 UltraWide IPS Monitor
|
ccm
Max Output Level: -89 dBFS
- Total Posts : 63
- Joined: 2016/03/12 13:13:22
- Status: offline
Re: Latest Sonar Update...
2017/02/15 16:57:43
(permalink)
Funny, for me it was the opposite. I use Tungsten exclusively & with this update it was switched to Mercury.
Also none of the track or buses vu meters worked until I switched themes.
|
millzy
Max Output Level: -73 dBFS
- Total Posts : 890
- Joined: 2005/01/28 20:32:51
- Location: Melbourne, Australia
- Status: offline
Re: Latest Sonar Update...
2017/02/15 17:00:51
(permalink)
I'm not sure why, but I had the same experience. Having said that, everything has been working smoothly. I don't have any custom shortcuts so I cant comment on whether yours will be intact or not - good luck!
post edited by millzy - 2017/02/15 17:23:28
Millzy i7 3770K, 16gb ram, Samsung EVO SSD, 2 x WD drives, RME Babyface, Win 10 (x64), Cakewalk by Bandlab, heaps of other stuff.
|
joden
Max Output Level: -65 dBFS
- Total Posts : 1263
- Joined: 2007/09/22 17:03:46
- Status: offline
Re: Latest Sonar Update...
2017/02/15 17:07:31
(permalink)
Only issue I had was it "lost" Breverb 2. Any existing projects I had to re-insert the effect into.
|
synkrotron
Max Output Level: -22.5 dBFS
- Total Posts : 5263
- Joined: 2006/04/28 16:21:21
- Location: Warrington, UK
- Status: offline
Re: Latest Sonar Update...
2017/02/15 17:20:11
(permalink)
Not just me with a little bit of strangeness then. Nothing major to report, yet... My current project appears to be running okay. Nothing else to report and I just need to catch up on what the updates where, see if I am missing something useful  Keyboard shortcuts are all intact and as I left them. I actually set a lot of my keyboard shortcuts to "do nothing" because I got fed up with my big fat fingers doing things I wasn't expecting...
http://www.synkrotron.co.uk/Intel Core™i7-3820QM Quad Core Mobile Processor 2.70GHz 8MB cache | Intel HM77 Express Chipset | 16GB SAMSUNG 1600MHz SODIMM DDR3 RAM | NVIDIA GeForce GTX 675M - 2.0GB DDR5 Video RAM | 500GB Samsung 850 Pro SSD | 1TB Samsung 850 Pro SSD | Windows 10 Pro | Roland OCTA-CAPTURE | SONAR Platinum ∞ FFS| Too many VSTi's to list here | KRK KNS-8400 Headphones | Roland JP-8000 | Oberheim OB12 | Novation Nova | Gibson SG Special | PRS Studio
|
The Grim 
Max Output Level: -76 dBFS
- Total Posts : 724
- Joined: 2016/04/19 02:31:06
- Location: hades
- Status: offline
Re: Latest Sonar Update...
2017/02/15 19:06:29
(permalink)
i had the usual (of late) need to reset my theme after the update. i thought i read that that issue was fixed, but apparently not. no big deal just change the theme back, annoying all the same. other than that it seems fine for the little time i use it
|
tenfoot
Max Output Level: -53.5 dBFS
- Total Posts : 2186
- Joined: 2015/01/22 18:12:07
- Location: Qld, Australia
- Status: offline
Re: Latest Sonar Update...
2017/02/15 23:11:44
(permalink)
☄ Helpfulby synkrotron 2017/02/16 06:20:25
synkrotron
Anyway, when I started Sonar, it was as though it was being run for the first time, asking me to set up my audio interface,
Did you skip any updates? The new setup routine you saw was first was introduced with wasapi exclusive in 2016-11 I believe.
Bruce. Sonar Platinum 2017-09, Studio One 3.5.3, Win 10 x64, Quad core i7, RME Fireface, Behringer X32 Producer, Behringer X32 Rack, Presonus Faderport, Lemure Software Controller (Android), Enttec DMXIS VST lighting controller, Xtempo POK.
|
synkrotron
Max Output Level: -22.5 dBFS
- Total Posts : 5263
- Joined: 2006/04/28 16:21:21
- Location: Warrington, UK
- Status: offline
Re: Latest Sonar Update...
2017/02/16 06:22:13
(permalink)
tenfoot
Did you skip any updates? The new setup routine you saw was first was introduced with wasapi exclusive in 2016-11 I believe.
Ah, thanks Bruce, yes, I did skip one. I wasn't in a rush to update at the time as everything was running reasonably smooth. I only went for this latest update because I fancied the ability of playing a long MIDI note from anywhere along its length. cheers andy
http://www.synkrotron.co.uk/Intel Core™i7-3820QM Quad Core Mobile Processor 2.70GHz 8MB cache | Intel HM77 Express Chipset | 16GB SAMSUNG 1600MHz SODIMM DDR3 RAM | NVIDIA GeForce GTX 675M - 2.0GB DDR5 Video RAM | 500GB Samsung 850 Pro SSD | 1TB Samsung 850 Pro SSD | Windows 10 Pro | Roland OCTA-CAPTURE | SONAR Platinum ∞ FFS| Too many VSTi's to list here | KRK KNS-8400 Headphones | Roland JP-8000 | Oberheim OB12 | Novation Nova | Gibson SG Special | PRS Studio
|
Kev999
Max Output Level: -36 dBFS
- Total Posts : 3922
- Joined: 2007/05/01 14:22:54
- Location: Victoria, Australia
- Status: offline
Re: Latest Sonar Update...
2017/02/17 03:01:31
(permalink)
synkrotron
I finally got round to updating to the latest version of SPlat ... and the Tungsten theme was active, even though I always use Mercury ... this is the first time this has happened...
It did this to me on my last update, which was 22.11.0.111. I was worried in case it changed any other settings, but nothing else stood out as being different.
SonarPlatinum∞(22.11.0.111)|Mixbus32C(4.3.19)|DigitalPerformer(9.5.1)|Reaper(5.77)FractalDesign:DefineR5|i7-6850k@4.1GHz|16GB@2666MHz-DDR4|MSI:GamingProCarbonX99a|Matrox:M9148(x2)|UAD2solo(6.5.2)|W7Ult-x64-SP1
Audient:iD22+ASP800|KRK:VXT6|+various-outboard-gear|+guitars&basses, etc.
Having fun at work lately
|
siordanescu
Max Output Level: -87 dBFS
- Total Posts : 194
- Joined: 2010/08/02 13:34:14
- Location: Timisoara/Romania
- Status: offline
Re: Latest Sonar Update...
2017/02/17 05:05:47
(permalink)
I can not confirm this behavior. The latest update is 23.1.0 Build 32 (2017.01) ... right?
HP EliteBook 8460p Intel core i7-2620M, 2,7 ghz, 8G RAM, Win 10 x64, CAKEWALK by BANDLAB, SONAR PLATINUM, M-AUDIO PROJECTMIX, ALESIS IO 26, TASCAM US 16x08, TC ELECTRONIC KONNEKT 24 D, ROLAND V SYNTH, ROLAND XP 50, M AUDIO PROKEYS 88.
|