AnsweredHow to use V700 win 8 driver in win 10 (also applies to some other Roland drivers)

Page: << < ..678910 > Showing page 9 of 10
Author
Beeej21
Max Output Level: -88 dBFS
  • Total Posts : 115
  • Joined: 2007/03/03 02:23:34
  • Status: offline
Re: v700 and Windows 10 2016/09/27 03:12:00 (permalink)
Rob[atSound-Rehab]
Nevermind. I gave it a go and everything is fine. VS-700R and VS-700C installed on all systems with win10 #1607 without any issues (well, the issue was to get 1607 itself installed because one machine just wouldn't want to). So contrary to what is out there somewhere on the web it did not make a difference whether you come from a clean build or an in place upgrade.



Glad it all worked out for you, Rob.  It was hard for me to imagine that there'd be a significant different in OS features between a clean build and an upgrade... but you can never be certain these days on anything anymore.  Again, I really appreciate you coming through for me in such a huge way.  Glad you are up and running.

DAW: Sonar Platinum, Windows 10 Ultimate 64bit**Computer: Intel i7 980x HexaCore Extreme 3.33gHz, Kingston HyperX 24GB RAM, ASUS P6T Deluxe V2 MB, 2x 300GB V-Raptor HDD, 4TB RAID-0 VST/Sounds HDD**Hardware: VS 700 System, Kurzweil SP2XS, Akai MPK49** SoundCloud
synthnl
Max Output Level: -90 dBFS
  • Total Posts : 1
  • Joined: 2015/01/28 12:42:43
  • Status: offline
Re: v700 and Windows 10 2016/09/28 08:16:07 (permalink)
Hi I managed to get the drivers reinstalled, but when I add a control surface in Sonar Platinum the VS-700 doesn't show up as a control surface type. Do I need to reinstall something else?
Anderton
Max Output Level: 0 dBFS
  • Total Posts : 14070
  • Joined: 2003/11/06 14:02:03
  • Status: offline
Re: v700 and Windows 10 2016/10/15 00:50:15 (permalink)
synthnl
Hi I managed to get the drivers reinstalled, but when I add a control surface in Sonar Platinum the VS-700 doesn't show up as a control surface type. Do I need to reinstall something else?



Yes, there's a .dll that needs to be installed. I forget which post mentioned where to get it, but it's in here somewhere...

The first 3 books in "The Musician's Guide to Home Recording" series are available from Hal Leonard and http://www.reverb.com. Listen to my music on http://www.YouTube.com/thecraiganderton, and visit http://www.craiganderton.com. Thanks!
Anderton
Max Output Level: 0 dBFS
  • Total Posts : 14070
  • Joined: 2003/11/06 14:02:03
  • Status: offline
Re: v700 and Windows 10 2016/10/15 01:02:33 (permalink)
Well...I've finally joined the "it works in Windows 10" club for the VS700C console in standalone mode! Kudos to everyone here for their insights, persistence, and willingness to help.
 
I never had any luck until forcing the driver update, as mentioned in post #236 - the computer kept being stuck in the uninstall/reinstall infinite loop, regardless of how often I turned off driver signing, rebooted, etc. I think this may have happened for two reasons. First, Windows was in the middle of a big update, and second, I don't think I was patient enough when plugging in the controller. I saw the posts where people said it would take around 10 minutes, but when it got longer than that I bailed and rebooted - probably leaving little driver pieces scattered around that the uninstall didn't touch.
 
Also, I needed to delete the VS-700 control surface and create a new one in Preferences. No big deal, but things didn't work until I did. It did not need to emulate a Mackie' it worked fine with the V700C dll, and functions properly as a Mackie control with other software.
 
It was important to get this working because I've been planning to sell it for months due to lack of space, and also, I have a big touch screen that takes care of a lot of the VS-700C's switched functions anyway. However I didn't feel I could sell it until I verified its full functionality with Windows 10, and also so I could give it a few hours of use to make sure everything worked properly. Thanks everyone!!!
 

The first 3 books in "The Musician's Guide to Home Recording" series are available from Hal Leonard and http://www.reverb.com. Listen to my music on http://www.YouTube.com/thecraiganderton, and visit http://www.craiganderton.com. Thanks!
geordiewingbolt
Max Output Level: -90 dBFS
  • Total Posts : 4
  • Joined: 2015/10/30 06:41:44
  • Status: offline
Re: v700 and Windows 10 2016/12/27 09:25:20 (permalink)
I want to use my VS700R temporarily on my tablet pc, but it has 32bit windows 10.
Does anyone know the correct changes to make to the RDIF1089.INF file in the "vs700_w81d_v202/files/32bit" folder?
 
OK, 1 hour after asking the above question I managed to suss it myself, so I'll leave this here in case any one else is desperately holding on to their VS700R like myself and needs to use 32bit windows 10.
I compared the original and edited 64bit RDIF1089.INF files and made relatively the same changes to the 32 bit RDIF1089.INF file.
 
IMPORTANT, THIS IS FOR 32BIT WINDOWS 10 ONLY. FOR 64BIT WINDOWS GO TO THE FIRST POST IN THIS THREAD.
So the changes I made are highlighted in bold here :
 
[Manufacturer]
%MfgName%=Roland,NTx86.6.2,NTx86.10
;[ControlFlags]
;ExcludeFromSelect=*
[Roland]
;; Windows7 - Windows2000 or Windows9X / ME
;; not supported
[Roland.NTx86.10]
;; Windows8
%RDID0089DeviceDesc%=RDID0089Install, USB\VID_0582&PID_00FD ; VS-700
%RDID0090DeviceDesc%=RDID0090Install, USB\VID_0582&PID_00FE ; VS-700 M1
%RDID0091DeviceDesc%=RDID0091Install, USB\VID_0582&PID_00FF ; VS-700 M2
%RDID0089DeviceDesc2%=RDID0089Install, USB\VID_0582&PID_0100 ; VS-700
%RDID0091DeviceDesc2%=RDID0091Install, USB\VID_0582&PID_0101 ; VS-700 M2
[Roland.NTx86.6.2]
;; not supported
 
I mentioned before in post number 153 in this thread that it takes 5 to 10 minutes to install the drivers and it looks like it is doing nothing with only the option to press cancel.
It was the same here and it did actually take just over 10 minutes.
But, if you open device manager, all of the VS700r inputs and outputs show in device manager/audio inputs and outputs after only a minute or two, so you have to wait for 8 minutes before it says finishing installation.
 
 
post edited by geordiewingbolt - 2016/12/27 10:44:01
stevee9c6
Max Output Level: -81 dBFS
  • Total Posts : 464
  • Joined: 2005/06/22 15:45:14
  • Location: Far NW Houston-Cypress
  • Status: offline
Re: v700 and Windows 10 2017/01/12 12:17:55 (permalink)
I am still using Win 7 PRO.  I've thought about going to WIN 10 PRO but I don't know what benefit if any I would derive. I have such a weird system, but it works. I have a 700 Rack and Console but I really am using the rack only for midi input. I bought a Lynx Hilo USB when they first came out. In personal A:B listening, the HILO conversion simply smoked the Roland 700 rack.  So, I use the V700 console for a controller, the rack for midi input, and the HILO for conversion. I've got a ADL stereo tube pre for going in. If I need more inputs at one time, I can use the rack pre's sending to the HILO via the ADAT outs to the HILO ADAT in. I use a Roland TDK30SX as a drum controller with various samples. This works pretty well as you can use the internal TDK sounds for in ears no latency drum monitoring. I guess that I am in the "if it ain't broke, don't mess with it".  Someone tried to tell me that Win 7 is no longer supported and has been discontinued. Actually, that is only partially correct.  WIN7 PRO is still being sold and installed in business application machines, DAWS, etc. 
The two lessons that I came away with out of the V Studio 700 Cakewalk by Roland episode is a firm promise to never make another purchase of a Roland product and never under any circumstance buy a hardware product that can be used by only one music software application. 
I also run Pro Tools12, Harrison Mixbuss, and Cubase.  The controller is basically a "doorstop" when using these.  I guess as long as WIN 7PRO works,  I don't see much reason to change.

Steve 
www.stevestallingsmusic.com
Rob[at]Sound-Rehab
Max Output Level: -47 dBFS
  • Total Posts : 2819
  • Joined: 2011/02/03 04:31:35
  • Location: Sound-Rehab, Austria
  • Status: offline
Re: v700 and Windows 10 2017/01/12 14:09:16 (permalink)
stevee9c6
I am still using Win 7 PRO.  I've thought about going to WIN 10 PRO but I don't know what benefit if any I would derive. I have such a weird system, but it works.

 
you're right. I felt like that for a long time, then took the plunge in the last minute when win10 was still free to upgrade ... so now everything looks much more pretty and apart from that is the same ... expect the growing fear of every win10 update, especially since the last ones really temporarily broke things ...
 
stevee9c6
I have a 700 Rack and Console but I really am using the rack only for midi input.

 
that would be way too noisy for me - i've grown to really despise that fan noise. there is a 20$ replacement for that (e.g. ESI MIDI MATE USB cable) with even less MIDI jitter ...
 
stevee9c6
The two lessons that I came away with out of the V Studio 700 Cakewalk by Roland episode is a firm promise to never make another purchase of a Roland product and never under any circumstance buy a hardware product that can be used by only one music software application. 

 
very true. and if you print t-shirts with that on it, I will buy the first 10 !!!
 
BTW, still owning the rack and the console. the console I would not want to part with, the rack is only installed as the backup (or in case I need the fantom or ARX boards) ... meanwhile gone MOTU, not seen a proper Sonar crash since
 




GOOD TUNES LAST FOREVER
  +++   Visit the Rehab   +++
 
DAW: Platinum/X3e, win10 64 bit, i7-3930K (6x3.2GHz), Asus Sabertooth X79, 32 GB DDR3 1600MHz, ATI HD 5450, 120 GB SSD OCZ Agility3, 2x 1TB WD HDD SATA 600
Audio-Interface: 2x MOTU 1248 AVB, Focusrite OctoPre, (Roland Octa-Capture)   Control-Surface: VS-700C 
VSTi: WAVES, NI K10u, FabFilter, IK, ... (too many really) 
nshmourne
Max Output Level: -90 dBFS
  • Total Posts : 21
  • Joined: 2005/06/10 10:28:48
  • Status: offline
Re: v700 and Windows 10 2017/02/08 20:41:40 (permalink)
Ok.. so Windows 10 64 bit just forced an update on me and this trick is no longer working. Now when I try to update the driver, Windows is complaining that:
 
"the hash for the file is not present in the specified catalog file. the file is likely corrupt or the victim of tampering". 
 
/sigh.
 
Does anyone know how to get around this. I'm really hating roland right now. 
nshmourne
Max Output Level: -90 dBFS
  • Total Posts : 21
  • Joined: 2005/06/10 10:28:48
  • Status: offline
Re: v700 and Windows 10 2017/02/08 20:50:22 (permalink)
Ok nevermind. Evidently when windows updated, it enabled driver signing again. Going through that process again, fixed it. 
 
Cheers!
actualstarbuck
Max Output Level: -90 dBFS
  • Total Posts : 21
  • Joined: 2009/10/25 13:55:35
  • Location: San Francisco Bay Area
  • Status: offline
Re: v700 and Windows 10 2017/02/08 21:53:35 (permalink)
Okay, so I've got a strange one here. Hopefully someone can help me suss it out.
 
I've successfully done the whole unsigned driver thing a long time ago in Win10, and it's been running great. I've had to redo it a few times when I get an OS upgrade that overwrites it, but no real issues.
 
The other day, I went into Sonar Platinum and noticed that my VS-700c wasn't working. The USB light is on, it's being recognized under "Devices", but not under "Control Surfaces". I tried reinstalling the driver (which worked), but still no dice on getting it as an option under Control Surfaces.
 
Any ideas? If I can't get it to come up, is the ACT xml data available somewhere that I could just import it?
 
 

Tracking: Sonar Platinum  (64bit)
System: Win10 Pro (64bit), Asus  Maximus VIII Hero, i5-6600k@3.5Ghz,]i5-6600k@3.5Ghz,[/link] Nvidia GeForce 980Ti, 16GB Ram, SSD System drive, NAS RAID backup drive, VS-700c, RME Fireface UFX 
Instruments: Doepfer LMK2+, Roland TD-9 Drums
Nino Vargas
Max Output Level: -86 dBFS
  • Total Posts : 225
  • Joined: 2014/08/07 14:18:58
  • Location: Paris
  • Status: offline
Re: v700 and Windows 10 2017/02/16 14:25:13 (permalink)
Hi guys , news?
actualstarbuck
Max Output Level: -90 dBFS
  • Total Posts : 21
  • Joined: 2009/10/25 13:55:35
  • Location: San Francisco Bay Area
  • Status: offline
Re: v700 and Windows 10 2017/03/13 17:04:17 (permalink)
Update: I was able to use the Mackie control surface preset, which got me 95% of the right mappings to the VS-700c.
 
The only major issues I can't seem to fix it that my tape transport controls all work EXCEPT for the "go to beginning" ( |< ) button, which does nothing. If I could find a way to map that I'd be perfectly happy.
 
I'm also surprised that the full ACT data for the VS-700c doesn't seem to exist anywhere. Seems like it should, and that it would be a decent way of future-proofing in case later versions of Sonar somehow break the mapping.

Tracking: Sonar Platinum  (64bit)
System: Win10 Pro (64bit), Asus  Maximus VIII Hero, i5-6600k@3.5Ghz,]i5-6600k@3.5Ghz,[/link] Nvidia GeForce 980Ti, 16GB Ram, SSD System drive, NAS RAID backup drive, VS-700c, RME Fireface UFX 
Instruments: Doepfer LMK2+, Roland TD-9 Drums
Rob[at]Sound-Rehab
Max Output Level: -47 dBFS
  • Total Posts : 2819
  • Joined: 2011/02/03 04:31:35
  • Location: Sound-Rehab, Austria
  • Status: offline
Re: v700 and Windows 10 2017/03/14 10:40:53 (permalink) ☄ Helpfulby KungFuJosh 2017/04/08 17:49:59
actualstarbuck
Update: I was able to use the Mackie control surface preset, which got me 95% of the right mappings to the VS-700c.
 
The only major issues I can't seem to fix it that my tape transport controls all work EXCEPT for the "go to beginning" ( |< ) button, which does nothing. If I could find a way to map that I'd be perfectly happy.
 
I'm also surprised that the full ACT data for the VS-700c doesn't seem to exist anywhere. Seems like it should, and that it would be a decent way of future-proofing in case later versions of Sonar somehow break the mapping.




There is no reason why you should not have full functionality of vs-700 in Sonar under win10. You need to have the right control surface dll for Sonar installed, instead of using the Mackie one which will only give you limited functionality.
 
did you try using this? https://www.cakewalk.com/Support/Knowledge-Base/2007013201/V-Studio-700-Control-Surface-Plug-in-version-1-2-update

GOOD TUNES LAST FOREVER
  +++   Visit the Rehab   +++
 
DAW: Platinum/X3e, win10 64 bit, i7-3930K (6x3.2GHz), Asus Sabertooth X79, 32 GB DDR3 1600MHz, ATI HD 5450, 120 GB SSD OCZ Agility3, 2x 1TB WD HDD SATA 600
Audio-Interface: 2x MOTU 1248 AVB, Focusrite OctoPre, (Roland Octa-Capture)   Control-Surface: VS-700C 
VSTi: WAVES, NI K10u, FabFilter, IK, ... (too many really) 
actualstarbuck
Max Output Level: -90 dBFS
  • Total Posts : 21
  • Joined: 2009/10/25 13:55:35
  • Location: San Francisco Bay Area
  • Status: offline
Re: v700 and Windows 10 2017/03/14 20:08:46 (permalink)
Thanks, that did it! Not sure why my installation didn't have the VS-700 showing up properly, but everything is back to normal now. Gratzi.

Tracking: Sonar Platinum  (64bit)
System: Win10 Pro (64bit), Asus  Maximus VIII Hero, i5-6600k@3.5Ghz,]i5-6600k@3.5Ghz,[/link] Nvidia GeForce 980Ti, 16GB Ram, SSD System drive, NAS RAID backup drive, VS-700c, RME Fireface UFX 
Instruments: Doepfer LMK2+, Roland TD-9 Drums
gergstudio
Max Output Level: -90 dBFS
  • Total Posts : 2
  • Joined: 2017/04/01 16:53:41
  • Status: offline
Re: How to use V700 win 8 driver in win 10 (also applies to some other Roland drivers) 2017/04/06 16:22:31 (permalink) ☄ Helpfulby KungFuJosh 2017/05/21 22:28:01
Can we just get some win 10 drivers and reopen support for the vs700? c'mon... Some of us little guys broke the bank for a system that was tossed out in a couple years!
KungFuJosh
Max Output Level: -90 dBFS
  • Total Posts : 6
  • Joined: 2015/05/07 10:40:42
  • Status: offline
Re: How to use V700 win 8 driver in win 10 (also applies to some other Roland drivers) 2017/05/21 22:29:26 (permalink)
gergstudio
Can we just get some win 10 drivers and reopen support for the vs700? c'mon... Some of us little guys broke the bank for a system that was tossed out in a couple years!


 
Yes please! This kind of horrible support is offensive. It's not a lot of work to keep the drivers live. Laziness and greed are the only reasons they aren't supporting it anymore. Roland sucks, and that makes cakewalk suck by association.
 
 
ceez
Max Output Level: -90 dBFS
  • Total Posts : 10
  • Joined: 2004/02/27 22:05:21
  • Location: Austin, TX
  • Status: offline
Re: v700 and Windows 10 2017/06/04 07:10:47 (permalink)
So, I stupidly applied the Windows 10 Creator Update, and now my VS100 no longer works.

Wondering whether I should try the procedure in the first thread, or just rollback to the previous version of Windows 10?   I guess there's no chance for a driver update from Roland?
 
Thoughts?
KungFuJosh
Max Output Level: -90 dBFS
  • Total Posts : 6
  • Joined: 2015/05/07 10:40:42
  • Status: offline
Re: v700 and Windows 10 2017/06/04 11:23:37 (permalink)
ceez
So, I stupidly applied the Windows 10 Creator Update, and now my VS100 no longer works.

Wondering whether I should try the procedure in the first thread, or just rollback to the previous version of Windows 10?   I guess there's no chance for a driver update from Roland?
 
Thoughts?




Try the the procedure in the first post. As long as the Windows version is entered correctly, it should work. I'm still using my VS-700C in standalone mode, but I have to update the drive with each major Windows update.
 
Worst case, if it doesn't work, you can roll back later.
KungFuJosh
Max Output Level: -90 dBFS
  • Total Posts : 6
  • Joined: 2015/05/07 10:40:42
  • Status: offline
Re: v700 and Windows 10 2017/06/04 11:24:33 (permalink)
...and Roland being as lame as they are with support, I wouldn't expect a new official driver for your perfectly good hardware.
 
ceez
Max Output Level: -90 dBFS
  • Total Posts : 10
  • Joined: 2004/02/27 22:05:21
  • Location: Austin, TX
  • Status: offline
Re: v700 and Windows 10 2017/06/04 21:25:22 (permalink)
I said "F-it" and went over to Guitar Center and bought a Focusrite Scarlett 6i6.  I don't want to waste my time resuscitating the box every time there's a Windows update.   Just glad I bought the 100 and not the 700.
 
I have a Mac with Logic, so I can still use there.
KungFuJosh
Max Output Level: -90 dBFS
  • Total Posts : 6
  • Joined: 2015/05/07 10:40:42
  • Status: offline
Re: v700 and Windows 10 2017/06/05 02:12:28 (permalink)
Yeah, that ish doesn't make any sense. They supported the 100 instead of the flagship model longer.
Rob[at]Sound-Rehab
Max Output Level: -47 dBFS
  • Total Posts : 2819
  • Joined: 2011/02/03 04:31:35
  • Location: Sound-Rehab, Austria
  • Status: offline
Re: v700 and Windows 10 2017/06/09 08:26:45 (permalink)
Any one of you already on the Creators update?
 
Did you have the reinstall drivers? How about win8 drivers that required driver signing to be turned off to get it to install ... do they still work / require reinstall / don't work?

GOOD TUNES LAST FOREVER
  +++   Visit the Rehab   +++
 
DAW: Platinum/X3e, win10 64 bit, i7-3930K (6x3.2GHz), Asus Sabertooth X79, 32 GB DDR3 1600MHz, ATI HD 5450, 120 GB SSD OCZ Agility3, 2x 1TB WD HDD SATA 600
Audio-Interface: 2x MOTU 1248 AVB, Focusrite OctoPre, (Roland Octa-Capture)   Control-Surface: VS-700C 
VSTi: WAVES, NI K10u, FabFilter, IK, ... (too many really) 
KungFuJosh
Max Output Level: -90 dBFS
  • Total Posts : 6
  • Joined: 2015/05/07 10:40:42
  • Status: offline
Re: v700 and Windows 10 2017/06/09 11:57:07 (permalink)
Rob[atSound-Rehab]
Any one of you already on the Creators update?
 
Did you have the reinstall drivers? How about win8 drivers that required driver signing to be turned off to get it to install ... do they still work / require reinstall / don't work?




I'm on Windows 10 Creators Update (Version 1703). The driver install process is the same, and works fine (modified Win 8.1 driver, install unsigned). I did a clean install of this version of Windows, so I don't know if you'll need to if you're upgrading. I would assume yes, because, Windows.
Rob[at]Sound-Rehab
Max Output Level: -47 dBFS
  • Total Posts : 2819
  • Joined: 2011/02/03 04:31:35
  • Location: Sound-Rehab, Austria
  • Status: offline
Re: v700 and Windows 10 2017/06/16 22:02:43 (permalink)
Just migrated the first machine to the creators version 1703 after having an endless battle with stuck updates on 1607 before ...

I had to reinstall VS-700R drivers with the driver signing off trick (interestingly VS-700C worked without reinstallation), reauthorize AD2, reinstall WAVES about 3 times to get rid of VST scan errors and reinstall the driver for ESI M4U XT MIDI boxes which were behaving really funny after the update ... now seems up to date and properly recognized by win10 ... hopefully nothing serious will pop up now when get down to business ...

... and game mode is of course disabled ..

GOOD TUNES LAST FOREVER
  +++   Visit the Rehab   +++
 
DAW: Platinum/X3e, win10 64 bit, i7-3930K (6x3.2GHz), Asus Sabertooth X79, 32 GB DDR3 1600MHz, ATI HD 5450, 120 GB SSD OCZ Agility3, 2x 1TB WD HDD SATA 600
Audio-Interface: 2x MOTU 1248 AVB, Focusrite OctoPre, (Roland Octa-Capture)   Control-Surface: VS-700C 
VSTi: WAVES, NI K10u, FabFilter, IK, ... (too many really) 
Seth Kellogg [Cakewalk]
Administrator
  • Total Posts : 814
  • Joined: 2009/02/06 15:25:40
  • Location: Boston, MA
  • Status: offline
Re: v700 and Windows 10 2017/06/19 18:17:15 (permalink)
A few of us have been using VS-700 sets in the Creators update to great success. Glad to hear it's working for other users too.

Best Regards,
Seth
torerk
Max Output Level: -90 dBFS
  • Total Posts : 33
  • Joined: 2009/05/26 06:52:57
  • Location: Norway
  • Status: offline
Re: v700 and Windows 10 2017/06/24 19:47:22 (permalink)
Just to let you know.. Latest win 10 update:
Turned off signature 
(ps as a wizard mentioned earlier in this post this is easy way to do it:
Onother way to turn the driver-signing OFF and ON:
Run "cmd" as Administrator:
##to turn driver-signing OFF:
BCDEDIT –Set LoadOptions DDISABLE_INTEGRITY_CHECKS
BCDEDIT –Set TESTSIGNING ON
 
##to turn driver-signing ON --- back to the normal state ---:
BCDEDIT –Set LoadOptions EENABLE_INTEGRITY_CHECKS
BCDEDIT –Set TESTSIGNING OFF)
 
Installed the patched inf from earlier and everything seems to be 100% with both vs700 items. 
ringmasters
Max Output Level: -90 dBFS
  • Total Posts : 1
  • Joined: 2016/12/08 23:00:21
  • Status: offline
Re: v700 and Windows 10 2017/06/29 07:21:31 (permalink)
Crud. It's not working for me. It stops at Driver set up and does not complete the installaion!
 
henting
Max Output Level: -90 dBFS
  • Total Posts : 1
  • Joined: 2015/01/19 11:50:23
  • Status: offline
Re: How to use V700 win 8 driver in win 10 (also applies to some other Roland drivers) 2017/06/29 14:59:44 (permalink)
Hi John.
Thank you for your solution with VS-700.
Actually you can do it on a fresh installation of Win 10.
I have now also made it work with VS-700C stand alone, VS-100, UA-700, VS-20.
So guys out there, you can stil use your old Roland gear :-)
Henning T
Mully
Max Output Level: -60 dBFS
  • Total Posts : 1545
  • Joined: 2004/09/15 02:08:05
  • Location: Adelaide, Oztralia
  • Status: offline
Re: How to use V700 win 8 driver in win 10 (also applies to some other Roland drivers) 2017/10/07 09:40:33 (permalink)
+1...works a treat

ASUS H270, i7-7700, JLM BA & 1290, LA2A Opto4, loads of guff.
Waccerk
Max Output Level: -90 dBFS
  • Total Posts : 10
  • Joined: 2017/09/29 10:31:48
  • Status: offline
Re: How to use V700 win 8 driver in win 10 (also applies to some other Roland drivers) 2017/11/24 09:38:01 (permalink)
KungFuJosh
gergstudio
Can we just get some win 10 drivers and reopen support for the vs700? c'mon... Some of us little guys broke the bank for a system that was tossed out in a couple years!
 
Yes please! This kind of horrible support is offensive. It's not a lot of work to keep the drivers live. Laziness and greed are the only reasons they aren't supporting it anymore. Roland sucks, and that makes cakewalk suck by association.
 

Well...... i need any suggestions 
Page: << < ..678910 > Showing page 9 of 10
Jump to:
© 2024 APG vNext Commercial Version 5.1