Helpful ReplyWhere's the track phase reverse (polarity) button in SONAR Platinum?

Author
DaveMichel
Max Output Level: -90 dBFS
  • Total Posts : 2
  • Joined: 2015/12/12 10:07:43
  • Status: offline
2017/03/25 23:00:34 (permalink)

Where's the track phase reverse (polarity) button in SONAR Platinum?

I've just started using Platinum after being a loyal, curmudgeonly SONAR 7 user for many years. There is apparently no offline help for Platinum, and the online help says that there is a phase reverse button on each track - and that product help is for X2.
 
How do I reverse the track phase in Platinum?
#1
TimV
Max Output Level: -87 dBFS
  • Total Posts : 183
  • Joined: 2010/01/01 16:20:51
  • Status: offline
Re: Where's the track phase reverse (polarity) button in SONAR Platinum? 2017/03/26 02:38:15 (permalink) ☄ Helpfulby mettelus 2017/03/28 13:04:13
It's shown on page 496 of the Reference Guide. It's a circle with a diagonal line through it in either Track Inspector or Console view.

HP Pavilion Desktop
Intel Core 2 Quad Processor
8GB RAM
Windows 10 64-bit
Cakewalk by Bandlab
Sonar Platinum
Sonar 8.5 Studio Edition
Sonar X1 Studio Edition
Sonar X2 Producer
Sonar X3e Producer
 
#2
scook
Forum Host
  • Total Posts : 24146
  • Joined: 2005/07/27 13:43:57
  • Location: TX
  • Status: offline
Re: Where's the track phase reverse (polarity) button in SONAR Platinum? 2017/03/26 02:48:56 (permalink) ☄ Helpfulby Steve_Karl 2017/03/27 01:42:51
The Reference Guide pdf and chm local help files for Platinum are in the folder with the program, SONARPLT.exe. Make sure the SONAR Local Documentation package is installed.
 
X2, X3 and the current SONAR documentation are available here. Note: the current help is above the X2 and X3 listings
The current help for Track Inspectors may be found here
The phase button is in the top row point to by E in the image below, second from the left.

#3
The Maillard Reaction
Max Output Level: 0 dBFS
  • Total Posts : 31918
  • Joined: 2004/07/09 20:02:20
  • Status: offline
. 2017/03/26 13:05:24 (permalink)

post edited by Caa2 - 2017/03/31 11:19:39


#4
fireberd
Max Output Level: -38 dBFS
  • Total Posts : 3704
  • Joined: 2008/02/25 14:14:28
  • Location: Inverness, FL
  • Status: offline
Re: Where's the track phase reverse (polarity) button in SONAR Platinum? 2017/03/26 13:33:37 (permalink)
As an electronics tech, I associate Polarity as + or - in Voltage.  e.g +9VDC or -9VDC.   I associate "phase" the way Sonar interprets it. e.g. "180 degrees out of phase" which is phase inversion.

"GCSG Productions"
Franklin D-10 Pedal Steel Guitar (primary instrument). Nashville Telecaster, Bass, etc. 
ASUS ROG Maximus VIII Hero M/B, i7 6700K CPU, 16GB Ram, SSD and conventional hard drives, Win 10 Pro and Win 10 Pro Insider Pre-Release
Sonar Platinum/CbB. MOTU 896MK3 Hybrid, Tranzport, X-Touch, JBL LSR308 Monitors,  
Ozone 5,  Studio One 4.1
ISRC Registered
Member of Nashville based R.O.P.E. Assn.
#5
FCCfirstclass
Max Output Level: -71 dBFS
  • Total Posts : 969
  • Joined: 2003/11/15 15:02:42
  • Location: Las Vegas, Nevada
  • Status: offline
Re: Where's the track phase reverse (polarity) button in SONAR Platinum? 2017/03/26 14:00:54 (permalink)
As firebird said, polarity, as taught in electronics classes, means voltage, not phasing.  This is the way I was taught in college.

Win 10 Pro x64, 32Gb DDR3 ram, Sonar Platinum, Cubase 9.5, Mackie MCU Pro, Cakewalk VS 100, Roland Octa-Capture,  A 800 Pro, Carver M-1.5t amp & C4000 pre amp, various mics, drums and brass instruments.
 
And away we go!
#6
bitflipper
01100010 01101001 01110100 01100110 01101100 01101
  • Total Posts : 26036
  • Joined: 2006/09/17 11:23:23
  • Location: Everett, WA USA
  • Status: offline
Re: Where's the track phase reverse (polarity) button in SONAR Platinum? 2017/03/26 14:02:33 (permalink)
^^^ Correct. "Polarity inversion" is the correct term to use when referring to microphone and speaker wiring, but "phase inversion" is the proper term for electronics and digital audio. That, btw, is why the the Greek letter phi (ϕ), the electrical and mathematical symbol for phase, is also the near-universal icon for this switch on both hardware and software mixers.
 
The confusion, I think, stems from the way the switch has traditionally been used to correct improperly-wired microphone cables or to invert their signals (e.g. top and bottom snare mikes). In this case, we're using phase inversion to effectively implement polarity inversion.


All else is in doubt, so this is the truth I cling to. 

My Stuff
#7
scook
Forum Host
  • Total Posts : 24146
  • Joined: 2005/07/27 13:43:57
  • Location: TX
  • Status: offline
Re: Where's the track phase reverse (polarity) button in SONAR Platinum? 2017/03/26 14:18:33 (permalink)
Caa2



This is why I referred to the button by location in the Track Inspector instead of the image used on the button face.
 
Edit: restored an image of Caa2 original post. For some reason this user likes to erase their posts.
post edited by scook - 2017/04/04 18:47:31
#8
Anderton
Max Output Level: 0 dBFS
  • Total Posts : 14070
  • Joined: 2003/11/06 14:02:03
  • Status: offline
Re: Where's the track phase reverse (polarity) button in SONAR Platinum? 2017/03/26 15:32:03 (permalink)
Because there are no real "language police" in the audio industry, I've seen both terms used (then again this is an industry that for a long time couldn't figure out which pin of an XLR had to be "hot"). Some people say "phase" isn't correct because phase relates to frequency, and flicking a switch doesn't have an inherent relationship to frequency even though it does reverse phase. Others say "polarity" is correct because positive-going signals become negative-going, and vice-versa.
 
Most people refer to this function as a "phase" switch, then someone corrects them and says it should be "polarity," and then everyone says "yeah whatever, but when you say phase people know what you're talking about." And that seems to be about the extent of the standarization.

The first 3 books in "The Musician's Guide to Home Recording" series are available from Hal Leonard and http://www.reverb.com. Listen to my music on http://www.YouTube.com/thecraiganderton, and visit http://www.craiganderton.com. Thanks!
#9
brundlefly
Max Output Level: 0 dBFS
  • Total Posts : 14250
  • Joined: 2007/09/14 14:57:59
  • Location: Manitou Spgs, Colorado
  • Status: offline
Re: Where's the track phase reverse (polarity) button in SONAR Platinum? 2017/03/26 17:00:31 (permalink)
bitflipper
That, btw, is why the the Greek letter phi (ϕ), the electrical and mathematical symbol for phase, is also the near-universal icon for this switch on both hardware and software mixers.



So the real problem is that SONAR's phase inversion switch icon looks nothing like a Phi; the slash should really be vertical. No wonder the OP couldn't find it. 

SONAR Platinum x64, 2x MOTU 2408/PCIe-424  (24-bit, 48kHz)
Win10, I7-6700K @ 4.0GHz, 24GB DDR4, 2TB HDD, 32GB SSD Cache, GeForce GTX 750Ti, 2x 24" 16:10 IPS Monitors
#10
brundlefly
Max Output Level: 0 dBFS
  • Total Posts : 14250
  • Joined: 2007/09/14 14:57:59
  • Location: Manitou Spgs, Colorado
  • Status: offline
Re: Where's the track phase reverse (polarity) button in SONAR Platinum? 2017/03/26 17:12:51 (permalink) ☄ Helpfulby mettelus 2017/03/26 23:54:41
Caa2





'Phase Shift' is commonly understood to mean a time shift. 'Phase Inversion' is commonly understood to mean a polarity reversal with no time shift.

SONAR Platinum x64, 2x MOTU 2408/PCIe-424  (24-bit, 48kHz)
Win10, I7-6700K @ 4.0GHz, 24GB DDR4, 2TB HDD, 32GB SSD Cache, GeForce GTX 750Ti, 2x 24" 16:10 IPS Monitors
#11
gustabo
Max Output Level: -49.5 dBFS
  • Total Posts : 2591
  • Joined: 2009/01/05 17:32:38
  • Status: offline
Re: Where's the track phase reverse (polarity) button in SONAR Platinum? 2017/03/26 17:56:53 (permalink)
Ok, ok, ok, It's the button that when you put your mouse over it, you get a mouseover popup that says "Phase: (whatever state it's in)" such as "Phase: Normal" or "Phase: Inverted"


Cakewalk by Bandlab - Win10 Pro x64 - StudioCat Platinum Studio DAW - 32 GB Ram - MOTU UltraLite-mk3
M-Audio Keystation 88ES - Akai MPD26 (hot-rodded) - Alesis DM10 - a few guitars, a few amps
Novation Launch Control - Korg nanoKONTROL2 - PreSonus FaderPort - DAW Remote HD on iPad
Adam A7X - Behritone C50A
PreSonus Monitor Station v2 (controlling the mons)
https://www.facebook.com/groups/sonarusergroup/

#12
mettelus
Max Output Level: -22 dBFS
  • Total Posts : 5321
  • Joined: 2005/08/05 03:19:25
  • Location: Maryland, USA
  • Status: offline
Re: Where's the track phase reverse (polarity) button in SONAR Platinum? 2017/03/27 00:02:12 (permalink)
It is impossible to null a non-symmetrical wave form with a shift in time (and how would the switch determine its frequency anyway?)... This is actually the design of all time-based delay effects (shifting the same wave form to the right/left on the x-axis).
 
The only way to null a signal by the introduction onto itself is by reversing the polarity (flipping the signal on the X-axis) with the same amplitude for both.
 
It is hard to determine the logic of some naming conventions, but futile to worry about it... I still park on a driveway and drive on a parkway.

ASUS ROG Maximus X Hero (Wi-Fi AC), i7-8700k, 16GB RAM, GTX-1070Ti, Win 10 Pro, Saffire PRO 24 DSP, A-300 PRO, plus numerous gadgets and gizmos that make or manipulate sound in some way.
#13
mettelus
Max Output Level: -22 dBFS
  • Total Posts : 5321
  • Joined: 2005/08/05 03:19:25
  • Location: Maryland, USA
  • Status: offline
Re: Where's the track phase reverse (polarity) button in SONAR Platinum? 2017/03/27 02:52:54 (permalink) ☄ Helpfulby Anderton 2017/03/27 13:26:30
I do not think that folks are disputing the mislabeling. Phase inversion is really only applicable to "inversion of a symmetric periodic" waveform (as stated above), with the key terms being symmetric and periodic. A real-world application is in AC currents where these can lead to catastrophic damage to breakers by connecting AC buses out of phase (which goes way beyond simple inversion). In an audio realm, "symmetric and periodic" is pretty much N/A, but can be "simulated" via polarity inversion, which does not depends on the "symmetric and periodic" in any way.
 
In fact, if you *do* have a symmetric, periodic waveform (the only wave form you can easily phase invert anyway), phase inversion and polarity inversion are one and the same - polarity inversion is just a little broader, not dependent on signal, and super easy to accomplish. The application just has different meaning depending on the usage.

ASUS ROG Maximus X Hero (Wi-Fi AC), i7-8700k, 16GB RAM, GTX-1070Ti, Win 10 Pro, Saffire PRO 24 DSP, A-300 PRO, plus numerous gadgets and gizmos that make or manipulate sound in some way.
#14
chuckebaby
Max Output Level: 0 dBFS
  • Total Posts : 13146
  • Joined: 2011/01/04 14:55:28
  • Status: offline
Re: Where's the track phase reverse (polarity) button in SONAR Platinum? 2017/03/27 10:29:37 (permalink)
The OP's first post: Hey does anyone know where the phase button is ?
Our response: m1 and m2 , the equation is: where G is the gravitational constant (6.67E-11 m3 s-2 kg-1), r is the distance between the two objects, and F is the magnitude of the force between the objects.
 
 


Windows 8.1 X64 Sonar Platinum x64
Custom built: Asrock z97 1150 - Intel I7 4790k - 16GB corsair DDR3 1600 - PNY SSD 220GB
Focusrite Saffire 18I8 - Mackie Control
   
#15
DaveMichel
Max Output Level: -90 dBFS
  • Total Posts : 2
  • Joined: 2015/12/12 10:07:43
  • Status: offline
Re: Where's the track phase reverse (polarity) button in SONAR Platinum? 2017/03/27 16:47:04 (permalink)
Thanks, everybody, for the fun discussion. SONAR 7 had the polarity button (that's how I'll refer to it) on each track. Platinum now has it in the Inspectors.
 
Now we can discuss meter weighting (on another thread)? 
 
Dave
#16
mudgel
Max Output Level: 0 dBFS
  • Total Posts : 12010
  • Joined: 2004/08/13 00:56:05
  • Location: Linton Victoria (Near Ballarat)
  • Status: offline
Re: Where's the track phase reverse (polarity) button in SONAR Platinum? 2017/03/27 22:22:57 (permalink) ☄ Helpfulby chuckebaby 2017/03/28 12:19:27
You must have the tracks narrowed.

In the console menus select Strips >Widen all strips and you'll find each channel has its own Phase button

Mike V. (MUDGEL)

STUDIO: Win 10 Pro x64, SPlat & CbB x64,
PC: ASUS Z370-A, INTEL i7 8700k, 32GIG DDR4 2400, OC 4.7Ghz.
Storage: 7 TB SATA III, 750GiG SSD & Samsung 500 Gig 960 EVO NVMe M.2.
Monitors: Adam A7X, JBL 10” Sub.
Audio I/O & DSP Server: DIGIGRID IOS & IOX.
Screen: Raven MTi + 43" HD 4K TV Monitor.
Keyboard Controller: Native Instruments Komplete Kontrol S88.
#17
bitflipper
01100010 01101001 01110100 01100110 01101100 01101
  • Total Posts : 26036
  • Joined: 2006/09/17 11:23:23
  • Location: Everett, WA USA
  • Status: offline
Re: Where's the track phase reverse (polarity) button in SONAR Platinum? 2017/03/28 12:15:04 (permalink)
chuckebaby
The OP's first post: Hey does anyone know where the phase button is ?
Our response: m1 and m2 , the equation is: where G is the gravitational constant (6.67E-11 m3 s-2 kg-1), r is the distance between the two objects, and F is the magnitude of the force between the objects.
 
 



Best post of the day, Chuck.


All else is in doubt, so this is the truth I cling to. 

My Stuff
#18
chuckebaby
Max Output Level: 0 dBFS
  • Total Posts : 13146
  • Joined: 2011/01/04 14:55:28
  • Status: offline
Re: Where's the track phase reverse (polarity) button in SONAR Platinum? 2017/03/28 12:24:23 (permalink)
bitflipper
chuckebaby
The OP's first post: Hey does anyone know where the phase button is ?
Our response: m1 and m2 , the equation is: where G is the gravitational constant (6.67E-11 m3 s-2 kg-1), r is the distance between the two objects, and F is the magnitude of the force between the objects.
 
 



Best post of the day, Chuck.


ahhhh Im a sucker for good humor . Its what makes this world a better place.
 
But when it comes down to it, I learn so much from on these forums.
I owe a huge debt of gratitude to users like you and others who have taught me so much over the years.
So as much as I love to joke around, I am very grateful.

Windows 8.1 X64 Sonar Platinum x64
Custom built: Asrock z97 1150 - Intel I7 4790k - 16GB corsair DDR3 1600 - PNY SSD 220GB
Focusrite Saffire 18I8 - Mackie Control
   
#19
Jump to:
© 2024 APG vNext Commercial Version 5.1