Cakewalk by BandLab
Prev Thread
Next Thread

New PRV: Show Multiple Lanes as default?

Author
Post
Essentials Only Full Version
rogeriodec
Max Output Level: -75 dBFS
  • Total Posts : 753
  • Joined: 4/9/2004
  • Location: Brazil
  • Status: offline
April 05, 17 3:54 PM (permalink)

New PRV: Show Multiple Lanes as default?

By default, I always work in PRV by viewing all the control lanes at once, as in the old PRV way.
In the new version of PRV, they are now closed by default.
Now, every time I want to view all the control lanes at once, I'm forced to trigger the "View -> Show Multiple Lanes" menu in PRV.
The problem is that every time I close PRV and open again, this setting is LOST.
So, I am bound to repeat this configuration infinitely.
I would like to know if there is any setting that places "Show Multiple Lanes" by default?

rogeriodec.com.br


* Cakewalk By Bandlabs (always lastest versions), Window 10 x64
* Focusrite Scarlett Solo Audio Interface
* Intel i7-4790K CPU @ 4.00 GHz / ASROCK EXTREME 4 Z97 Mobo
* 2 SSD Samsung Evo 250 Gb (RAID-0) + 1 Western Digital 2 Tb + 1 Seagate 1 Tb
* Onboard video / 16 Gb RAM HyperX Fury 1600 Mhz
* 3 LCD Monitors
* Axiom 61 MIDI Controller, Tapco S5 Active Studio Monitors
#1

5 Replies Related Threads
    Anderton
    Max Output Level: 0 dBFS
    • Total Posts : 14070
    • Joined: 11/6/2003
    • Status: offline
    Re: New PRV: Show Multiple Lanes as default? April 05, 17 5:38 PM (permalink)
    rogeriodec
    The problem is that every time I close PRV and open again, this setting is LOST.



    This is true ONLY if there is no data in the lanes. If there is data, the setting persists not only if you close and re-open the PRV, but also, if you close and re-open the project.

    The first 3 books in "The Musician's Guide to Home Recording" series are available from Hal Leonard and http://www.reverb.com. Listen to my music on http://www.YouTube.com/thecraiganderton, and visit http://www.craiganderton.com. Thanks!
    #2
    rogeriodec
    Max Output Level: -75 dBFS
    • Total Posts : 753
    • Joined: 4/9/2004
    • Location: Brazil
    • Status: offline
    Re: New PRV: Show Multiple Lanes as default? April 05, 17 8:02 PM (permalink)
    Anderton
     
    This is true ONLY if there is no data in the lanes. If there is data, the setting persists not only if you close and re-open the PRV, but also, if you close and re-open the project.


    Sorry, but it's not true. Even though I have values in the lanes (CC1, CC7, etc), even if I check "Show Multiple Lanes", after I close  PRV and open it again the lanes appear collapsed.

    rogeriodec.com.br


    * Cakewalk By Bandlabs (always lastest versions), Window 10 x64
    * Focusrite Scarlett Solo Audio Interface
    * Intel i7-4790K CPU @ 4.00 GHz / ASROCK EXTREME 4 Z97 Mobo
    * 2 SSD Samsung Evo 250 Gb (RAID-0) + 1 Western Digital 2 Tb + 1 Seagate 1 Tb
    * Onboard video / 16 Gb RAM HyperX Fury 1600 Mhz
    * 3 LCD Monitors
    * Axiom 61 MIDI Controller, Tapco S5 Active Studio Monitors
    #3
    Anderton
    Max Output Level: 0 dBFS
    • Total Posts : 14070
    • Joined: 11/6/2003
    • Status: offline
    Re: New PRV: Show Multiple Lanes as default? April 05, 17 8:22 PM (permalink)
    Ah, I see what you mean. I took "settings" literally, i.e., the buttons allowing you to choose which lane is visible. These do indeed disappear if there is no data but persist if there is, however, yes - the display reverts to individual lane.
     
    Shouldn't be too hard for Cakewalk to have the display persist as set if that's what people would prefer.

    The first 3 books in "The Musician's Guide to Home Recording" series are available from Hal Leonard and http://www.reverb.com. Listen to my music on http://www.YouTube.com/thecraiganderton, and visit http://www.craiganderton.com. Thanks!
    #4
    Steve_Karl
    Max Output Level: -50 dBFS
    • Total Posts : 2534
    • Joined: 11/6/2003
    • Location: Pittsburgh, PA USA
    • Status: offline
    Re: New PRV: Show Multiple Lanes as default? April 05, 17 11:27 PM (permalink)
    Anderton
     Shouldn't be too hard for Cakewalk to have the display persist as set if that's what people would prefer.


    All displays should persist as set in all areas in my opinion
    and be recalled exactly as they were set when a project is reopened.



    Steve Karl
    https://soundcloud.com/steve_karl
    SPLAT 2017.01
    #5
    MarioD
    Max Output Level: -72 dBFS
    • Total Posts : 901
    • Joined: 4/15/2006
    • Status: offline
    Re: New PRV: Show Multiple Lanes as default? April 06, 17 0:27 PM (permalink)
    Steve_Karl
    Anderton
     Shouldn't be too hard for Cakewalk to have the display persist as set if that's what people would prefer.


    All displays should persist as set in all areas in my opinion
    and be recalled exactly as they were set when a project is reopened.






    I agree.

    The reason people say the vinyl sounds better is because the music was better.
     
    Sonar Platinum, Intel i7 –2600 CPU @ 3.2 GHz, 16 GB ram, 2x2TB internal drives and 1 1TB internal drive, Radeon HD 5570 video card, HP 25" monitor,
    Roland Octa Capture, MOTU Midi Express 128, Win 10 Pro

     
    www.soundcloud.com/Mario_Guitar
    #6
    Home » [Cakewalk Products] » SONAR » New PRV: Show Multiple Lanes as default?
    Jump to:
    © 2025 APG vNext Commercial Version 5.1