OldNick
Max Output Level: -68 dBFS
- Total Posts : 1149
- Joined: 2005/12/14 20:35:17
- Location: Perth...W Australia, the sunset home
- Status: offline
Turn off Screensets?
I go to enter a value into a numeric field and if I have not got it right to accept data entry, suddenly I am seeing some totally unrecognisable view of "my" project.
Can I stop 1-9 changing screens on me...please? To me it's just confusing and too easy to stuff up. I tried searching key bindings and did not find it. Help says 1-9 change screensets, but if I look at 1 in keybinding it highlights no response.
EDIT: I used the key bindings and it says that 1-9 are bound to screensets 1-9. Searching screenset in the action list gives no result. Selecting 1-9 and asking to Unbind does not work.
Nick Aced : Zither Mush (I no longer have ANY idea what this means) Ancient Seeker of Artifacts Platinum 23.4.0, Win 7 64 bit
|
Anonymungus!
Max Output Level: -85 dBFS
- Total Posts : 259
- Joined: 2014/09/05 16:08:43
- Location: Nice, Ca
- Status: offline
Re: Turn off Screensets?
2017/04/01 01:26:14
(permalink)
Why do you need to press 1-9? What is it you want to do? 
Sonar Platinum x64 Lifetime, Windows 10 x64, Intel Quad Core CPU@3.40GHz, 8GB RAM, (2)1.5T Hard Drives, Presonus AudioBox 44VSL, Roland A-500Pro MIDI Controller & lots more stuff
|
Jimbo 88
Max Output Level: -57 dBFS
- Total Posts : 1828
- Joined: 2007/03/19 12:27:17
- Location: Elmhurst, Illinois USA
- Status: offline
Re: Turn off Screensets?
2017/04/01 02:57:34
(permalink)
I actually have the same problem. I accidentally hit a number key in the heat of the battle and POOF... I hope I remember what screen set I was on.
Cakewalk By Bandlab Cubase 9.5 Pro Windows 7 64 Bit Core i7-8700 32 Gig Ram 3.20ghz RME Fireface 400 Audio Card Behringer FCA 1616 Sweetwater Creation Station
|
tenfoot
Max Output Level: -53.5 dBFS
- Total Posts : 2186
- Joined: 2015/01/22 18:12:07
- Location: Qld, Australia
- Status: offline
Re: Turn off Screensets?
2017/04/01 02:59:27
(permalink)
☄ Helpfulby jacksop 2017/04/03 19:28:54
OldNick
I go to enter a value into a numeric field and if I have not got it right to accept data entry, suddenly I am seeing some totally unrecognisable view of "my" project.
Can I stop 1-9 changing screens on me...please? To me it's just confusing and too easy to stuff up. I tried searching key bindings and did not find it. Help says 1-9 change screensets, but if I look at 1 in keybinding it highlights no response.
EDIT: I used the key bindings and it says that 1-9 are bound to screensets 1-9. Searching screenset in the action list gives no result. Selecting 1-9 and asking to Unbind does not work.
In key bindings, there is a function listed called something like 'do nothing' (sorry, not at my PC) that is used to overide default actons. Bind keys 1- 9 to that. For some reason the screenset key bindings were removed from the list in 2017-02. Hopefully it was in error and they will return. EDIT: Back in the studio - the function in keybindings is indeed called 'do nothing'. Just type the word 'nothing' into the search box.
Bruce. Sonar Platinum 2017-09, Studio One 3.5.3, Win 10 x64, Quad core i7, RME Fireface, Behringer X32 Producer, Behringer X32 Rack, Presonus Faderport, Lemure Software Controller (Android), Enttec DMXIS VST lighting controller, Xtempo POK.
|
promidi
Max Output Level: -66 dBFS
- Total Posts : 1220
- Joined: 2014/11/21 18:46:39
- Location: South Australia
- Status: offline
Re: Turn off Screensets?
2017/04/01 08:34:34
(permalink)
If you open up a KBN file (Which is an exported keybinding file) from your %userprofile%\AppData\Roaming\Cakewalk\SONAR Platinum folder with your favourite text editor and add the following in the [Bindings] section:
Kx00600B=874
Kx00610B=865
Kx00620B=866
Kx00630B=867
Kx00640B=868
Kx00650B=869
Kx00660B=870
Kx00670B=871
Kx00680B=872
Kx00690B=873
This will map CTRL num 0 to 9 to the 10 screensets. CTRL 1 to 9 will be screenset 1 to 9 respectively and CTRL num 0 will be mapped to screenset 10
Of course, make sure numlock is on
This works as of 2017.3 but I cannot guarantee that this will continue to work for future updates.
If you are going to work on a KBN file, make sure you have a backup of the original. Also make sure you export your current key mappings to a KBN file so you can revert if need be.
Hope this helps a little.
Windows 10 64bit fully patched, 16 gig ram . PCR-800 Controller. (Working in Win 10 1809 64bit)CPU: i5 4670. Video: Nvidia GTX560ti (latest drivers). Audio IF: Focusrite 2i2 2nd Gen
Internet always on.
Software: Cakewalk by Bandlab (2018.09 B29)
ASIO mode. 24bit 48khz 256 samples Rapture Pro, AAS GS2, VS-3, EP-4, VA-2, Chromophone 2, Z3TA+ 2, Addictive drums 2, Addictive Keys, Mpowersynth (latest), Iris 2, GPO5, Sampletank 3,
|
tenfoot
Max Output Level: -53.5 dBFS
- Total Posts : 2186
- Joined: 2015/01/22 18:12:07
- Location: Qld, Australia
- Status: offline
Re: Turn off Screensets?
2017/04/01 08:52:26
(permalink)
promidi
If you open up a KBN file (Which is an exported keybinding file) from your %userprofile%\AppData\Roaming\Cakewalk\SONAR Platinum folder with your favourite text editor and add the following in the [Bindings] section:
Kx00600B=874
Kx00610B=865
Kx00620B=866
Kx00630B=867
Kx00640B=868
Kx00650B=869
Kx00660B=870
Kx00670B=871
Kx00680B=872
Kx00690B=873
This will map CTRL num 0 to 9 to the 10 screensets. CTRL 1 to 9 will be screenset 1 to 9 respectively and CTRL num 0 will be mapped to screenset 10
Of course, make sure numlock is on
This works as of 2017.3 but I cannot guarantee that this will continue to work for future updates.
If you are going to work on a KBN file, make sure you have a backup of the original. Also make sure you export your current key mappings to a KBN file so you can revert if need be.
Hope this helps a little.
That's great info Promidi - I'll file that away thanks. I believe the OP wants to unmap the shortcuts though, not map them.
Bruce. Sonar Platinum 2017-09, Studio One 3.5.3, Win 10 x64, Quad core i7, RME Fireface, Behringer X32 Producer, Behringer X32 Rack, Presonus Faderport, Lemure Software Controller (Android), Enttec DMXIS VST lighting controller, Xtempo POK.
|
OldNick
Max Output Level: -68 dBFS
- Total Posts : 1149
- Joined: 2005/12/14 20:35:17
- Location: Perth...W Australia, the sunset home
- Status: offline
Re: Turn off Screensets?
2017/04/01 09:15:44
(permalink)
Anonymungus!
Why do you need to press 1-9? What is it you want to do?
Enter data into a field, for instance. It's just that if I type when I have not prepared the filed by clicking (sometimes twice) and ensuring it's ready for data entry, then I hit say "3" and my entire screen changes.
Nick Aced : Zither Mush (I no longer have ANY idea what this means) Ancient Seeker of Artifacts Platinum 23.4.0, Win 7 64 bit
|
OldNick
Max Output Level: -68 dBFS
- Total Posts : 1149
- Joined: 2005/12/14 20:35:17
- Location: Perth...W Australia, the sunset home
- Status: offline
Re: Turn off Screensets?
2017/04/01 09:20:04
(permalink)
tenfoot
In key bindings, there is a function listed called something like 'do nothing' (sorry, not at my PC) that is used to overide default actons. Bind keys 1- 9 to that.
For some reason the screenset key bindings were removed from the list in 2017-02. Hopefully it was in error and they will return.
EDIT: Back in the studio - the function in keybindings is indeed called 'do nothing'. Just type the word 'nothing' into the search box.
HAH! I should have known _that_ as well! 
Nick Aced : Zither Mush (I no longer have ANY idea what this means) Ancient Seeker of Artifacts Platinum 23.4.0, Win 7 64 bit
|
tenfoot
Max Output Level: -53.5 dBFS
- Total Posts : 2186
- Joined: 2015/01/22 18:12:07
- Location: Qld, Australia
- Status: offline
Re: Turn off Screensets?
2017/04/01 15:47:15
(permalink)
OldNick
tenfoot
In key bindings, there is a function listed called something like 'do nothing' (sorry, not at my PC) that is used to overide default actons. Bind keys 1- 9 to that.
For some reason the screenset key bindings were removed from the list in 2017-02. Hopefully it was in error and they will return.
EDIT: Back in the studio - the function in keybindings is indeed called 'do nothing'. Just type the word 'nothing' into the search box.
HAH! I should have known _that_ as well!
Haha - I find it all too easy to forget what I know in the heat of the moment Nick! Hope the dogs are well mate:)
Bruce. Sonar Platinum 2017-09, Studio One 3.5.3, Win 10 x64, Quad core i7, RME Fireface, Behringer X32 Producer, Behringer X32 Rack, Presonus Faderport, Lemure Software Controller (Android), Enttec DMXIS VST lighting controller, Xtempo POK.
|
jpetersen
Max Output Level: -61 dBFS
- Total Posts : 1499
- Joined: 2015/07/11 20:22:53
- Status: offline
Re: Turn off Screensets?
2017/04/02 07:10:29
(permalink)
Same problem here!
I am renaming clips to note names.
If the clip name is not selected properly and I type A#0 then -whoops!?!
I don't use screensets so much that I need hotkeys.
A simple disable would be a welcome feature.
|
OldNick
Max Output Level: -68 dBFS
- Total Posts : 1149
- Joined: 2005/12/14 20:35:17
- Location: Perth...W Australia, the sunset home
- Status: offline
Re: Turn off Screensets?
2017/04/02 08:15:36
(permalink)
Did ya pick up the way to do it in the thread? Also apparently it was there as a key binding in the list, but disappeared. What puzzles me is that you be able to select screensets in the interface by clicking numbers, but I can't find them. To select a screenset Do one of the following:  Select a screenset from the Screenset menu in the Control Bar. (got that) Click one of the Screenset buttons (1-10) in the Control Bar. (????) Press number keys 1-0 on the computer keyboard. These keys correspond to the 10 available screensets. (now turned off) On the Views menu, point to Screensets and select the desired screenset. (yup)...except it is in a sub-menu)
Nick Aced : Zither Mush (I no longer have ANY idea what this means) Ancient Seeker of Artifacts Platinum 23.4.0, Win 7 64 bit
|