Helpful ReplyCovering Amp / Mic with thick layers of cloth with good result

Author
tomixornot
Max Output Level: -58.5 dBFS
  • Total Posts : 1674
  • Joined: 2011/03/05 11:31:26
  • Status: offline
2017/04/20 07:12:44 (permalink)

Covering Amp / Mic with thick layers of cloth with good result

Normally when I record my bass / guitar, I plug the instrument directly into the hi-z input of my audio interface.
 
Lately I've been experimenting with the Ibanez Promethean bass amp and Eden World Tour pre-amp and got a sound that I like - so I wanted to record it by placing the mic in front of the bass amp. However, my room air-cond noise is quite loud and there is a construction going on opposite my house. After setting the mic, I cover up the amp/mic with a few layers of cloth, towels, including a piece of deflated single air-bed, which is quite thick.
 
After covering up the amp/mic, it sounded much softer in front of the amp and I record using headphones.
 
The result is very good, sounded very much like when I'm playing directly over the amp and none noticeable background noise.

Albert


i7 2600K @ 3.40GHz / MB Intel DP67BG / 16GB Ram
- ADATA 250GB SSD (Boot)
- Samsung Spinpoint F1 1TB HDD (Samples)
Audio interface : Motu 828 MK ii
 
i7 6700K @ 4.00GHz / MB Asrock Z170 / 16GB Ram
- Samsung EVO 850 120GB / 500 GB SSD

Audio interface : Roland Quad Capture
 
Win 10 Pro / Sonar Platinum
#1
Mosvalve
Max Output Level: -67 dBFS
  • Total Posts : 1194
  • Joined: 2009/11/20 20:49:33
  • Location: New Jersey
  • Status: offline
Re: Covering Amp / Mic with thick layers of cloth with good result 2017/04/21 01:57:52 (permalink)
I recorded several guitar tracks placing my amp on a couch covering it with 5 heavy moving blankets with the mic placed inside. I had it covered so well you can hardly hear it and I had it fairly loud. The results was excellent. I didn't think it would sound good but it sounded really good. I haven't tried it with bass yet.

BobV 
 
 
 
ASUS Prime Z370-P - Intel Core i7+ 8700K 3.7GHZ 16GB Memory, Intel HD Graphics 630 GPU,  Windows 10 Pro 64bit,  , Sonar Platinum 64bit, Motu 828MK3 Hybrid, Warm Audio TB12 Pre, Warm Audio WA273 Pre, AEA RPQ 500 Pre, Warm Audio WA76 Compressor, Presonus D8 Pre, Tonelux EQ5P 500 Eq, Kush Electra 500 Eq, Lindell PEX 500 Eq, Yamaha 80M monitors with HS10W Sub,  and a bunch of other good stuff. I have a Roland Juno-106 that's looking for a new home. PM me.
#2
synkrotron
Max Output Level: -22.5 dBFS
  • Total Posts : 5263
  • Joined: 2006/04/28 16:21:21
  • Location: Warrington, UK
  • Status: offline
Re: Covering Amp / Mic with thick layers of cloth with good result 2017/04/21 03:07:09 (permalink)
Interesting... I always DI because I don't want to upset the neighbours.

Might try the blanket idea. My amp isn't great, a low end Blackstar combi but still, it's worth giving it a go.

I only have a choice of three mics, two condenser and an SM58 beta. Which do you think is the best to use?

cheers

andy

http://www.synkrotron.co.uk/
Intel Core™i7-3820QM Quad Core Mobile Processor 2.70GHz 8MB cache | Intel HM77 Express Chipset | 16GB SAMSUNG 1600MHz SODIMM DDR3 RAM | NVIDIA GeForce GTX 675M - 2.0GB DDR5 Video RAM | 500GB Samsung 850 Pro SSD | 1TB Samsung 850 Pro SSD | Windows 10 Pro | Roland OCTA-CAPTURE | SONAR Platinum ∞ FFS| Too many VSTi's to list here | KRK KNS-8400 Headphones | Roland JP-8000 | Oberheim OB12 | Novation Nova | Gibson SG Special | PRS Studio
#3
gswitz
Max Output Level: -18.5 dBFS
  • Total Posts : 5694
  • Joined: 2007/06/16 07:17:14
  • Location: Richmond Virginia USA
  • Status: offline
Re: Covering Amp / Mic with thick layers of cloth with good result 2017/04/21 03:26:30 (permalink)
Idk why but it is much easier to get great sound with the amp above five.

StudioCat > I use Windows 10 and Sonar Platinum. I have a touch screen.
I make some videos. This one shows how to do a physical loopback on the RME UCX to get many more equalizer nodes.
#4
tomixornot
Max Output Level: -58.5 dBFS
  • Total Posts : 1674
  • Joined: 2011/03/05 11:31:26
  • Status: offline
Re: Covering Amp / Mic with thick layers of cloth with good result 2017/04/21 08:21:57 (permalink)
Mosvalve
I recorded several guitar tracks placing my amp on a couch covering it with 5 heavy moving blankets with the mic placed inside. I had it covered so well you can hardly hear it and I had it fairly loud. The results was excellent. I didn't think it would sound good but it sounded really good. I haven't tried it with bass yet.




Mine is a 9-string Ibanez RG-9, the 3 low strings is replaced with actual bass strings. It come quite close sounding like a bass guitar at the bottom end.

Albert


i7 2600K @ 3.40GHz / MB Intel DP67BG / 16GB Ram
- ADATA 250GB SSD (Boot)
- Samsung Spinpoint F1 1TB HDD (Samples)
Audio interface : Motu 828 MK ii
 
i7 6700K @ 4.00GHz / MB Asrock Z170 / 16GB Ram
- Samsung EVO 850 120GB / 500 GB SSD

Audio interface : Roland Quad Capture
 
Win 10 Pro / Sonar Platinum
#5
tomixornot
Max Output Level: -58.5 dBFS
  • Total Posts : 1674
  • Joined: 2011/03/05 11:31:26
  • Status: offline
Re: Covering Amp / Mic with thick layers of cloth with good result 2017/04/21 08:29:37 (permalink) ☄ Helpfulby synkrotron 2017/04/21 08:54:48
synkrotron
Interesting... I always DI because I don't want to upset the neighbours.

Might try the blanket idea. My amp isn't great, a low end Blackstar combi but still, it's worth giving it a go.

I only have a choice of three mics, two condenser and an SM58 beta. Which do you think is the best to use?

cheers

andy



Condenser would be good. Mine is the Behringer B2-Pro. Also, it's the fist time I'm using the Motu 828 MK ii - compared to my previous Quad Capture - the Motu mic pre amp is very quiet.

Albert


i7 2600K @ 3.40GHz / MB Intel DP67BG / 16GB Ram
- ADATA 250GB SSD (Boot)
- Samsung Spinpoint F1 1TB HDD (Samples)
Audio interface : Motu 828 MK ii
 
i7 6700K @ 4.00GHz / MB Asrock Z170 / 16GB Ram
- Samsung EVO 850 120GB / 500 GB SSD

Audio interface : Roland Quad Capture
 
Win 10 Pro / Sonar Platinum
#6
tomixornot
Max Output Level: -58.5 dBFS
  • Total Posts : 1674
  • Joined: 2011/03/05 11:31:26
  • Status: offline
Re: Covering Amp / Mic with thick layers of cloth with good result 2017/04/21 08:31:45 (permalink)
gswitz
Idk why but it is much easier to get great sound with the amp above five.



I started out to reduce the room air cond noise :)

Albert


i7 2600K @ 3.40GHz / MB Intel DP67BG / 16GB Ram
- ADATA 250GB SSD (Boot)
- Samsung Spinpoint F1 1TB HDD (Samples)
Audio interface : Motu 828 MK ii
 
i7 6700K @ 4.00GHz / MB Asrock Z170 / 16GB Ram
- Samsung EVO 850 120GB / 500 GB SSD

Audio interface : Roland Quad Capture
 
Win 10 Pro / Sonar Platinum
#7
synkrotron
Max Output Level: -22.5 dBFS
  • Total Posts : 5263
  • Joined: 2006/04/28 16:21:21
  • Location: Warrington, UK
  • Status: offline
Re: Covering Amp / Mic with thick layers of cloth with good result 2017/04/21 09:01:35 (permalink)
tomixornot
Also, it's the fist time I'm using the Motu 828 MK ii - compared to my previous Quad Capture - the Motu mic pre amp is very quiet.




Hmmm... Yeah, I have a QUAD-CAPTURE but I never go in via it's inputs. Instead, I bought a Roland MMP-2 modelling preamp and it has SPDIF in/out so I plug into that and go into the SPDIF of the Q-C. Works far better than the Q-C
 
I've got an OCTA-CAPTURE now but I got so used to using the MMP-2...
 
Thanks for your help Albert
 
cheers
 
andy

http://www.synkrotron.co.uk/
Intel Core™i7-3820QM Quad Core Mobile Processor 2.70GHz 8MB cache | Intel HM77 Express Chipset | 16GB SAMSUNG 1600MHz SODIMM DDR3 RAM | NVIDIA GeForce GTX 675M - 2.0GB DDR5 Video RAM | 500GB Samsung 850 Pro SSD | 1TB Samsung 850 Pro SSD | Windows 10 Pro | Roland OCTA-CAPTURE | SONAR Platinum ∞ FFS| Too many VSTi's to list here | KRK KNS-8400 Headphones | Roland JP-8000 | Oberheim OB12 | Novation Nova | Gibson SG Special | PRS Studio
#8
dwardzala
Max Output Level: -61 dBFS
  • Total Posts : 1470
  • Joined: 2008/05/26 19:18:33
  • Status: offline
Re: Covering Amp / Mic with thick layers of cloth with good result 2017/04/21 10:30:18 (permalink) ☄ Helpfulby synkrotron 2017/04/21 12:10:05
A technique that is often used is to build an isolation box for the amp or put it in a closet full of dampening material (i.e. clothes).
 
Amp sound better at higher gain/volume settings because you get more saturation (I guess that's what you'd call it) of the circuit.

Dave
Main Studio- Core i5 @2.67GHz, 16Gb Ram, (2) 500Gb HDs, (1) 360 Gb HD
MotU Ultralite AVB, Axiom 49 Midi Controller, Akai MPD18 Midi Controller
Win10 x64 Home
Sonar 2017.06 Platinum (and X3e, X2c, X1d)
 
Mobile Studio - Sager NP8677 (i7-6700HQ @2.67MHz, 16G Ram, 250G SSD, 1T HD)
M-Box Mini v. 2
Win 10 x64 Home
Sonar 2016.10 Platinum
 
Check out my original music:
https://soundcloud.com/d-wardzala/sets/d-wardzala-original-music
 
 
#9
synkrotron
Max Output Level: -22.5 dBFS
  • Total Posts : 5263
  • Joined: 2006/04/28 16:21:21
  • Location: Warrington, UK
  • Status: offline
Re: Covering Amp / Mic with thick layers of cloth with good result 2017/04/21 11:15:57 (permalink)
Another thought that I have had, regarding this method is, you lose out on that feeling you get when you are "fighting" the guitar/amp not to feedback, if you know what I mean... It's right on the edge and you know that if you let it, the strings would scream, but they don't because you are holding it back with your hands on the neck and at the bridge.
 
It's hard for me to explain, because, although I have been trying to play guitar, I've never been that good and most of the time I have simply DI'd. But, when I was in my early twenties and I didn't care much about my neighbours, I turned my Park amp up to that point I am trying to explain, and it sounded a whole lot different, and the guitar played a lot different, with the interaction between the sound from the amp, trying to set the stings to vibrate, and back through the pick-up and so on.
 
With this method, you will lose that "feeling."
 
Does any of that make sense?

http://www.synkrotron.co.uk/
Intel Core™i7-3820QM Quad Core Mobile Processor 2.70GHz 8MB cache | Intel HM77 Express Chipset | 16GB SAMSUNG 1600MHz SODIMM DDR3 RAM | NVIDIA GeForce GTX 675M - 2.0GB DDR5 Video RAM | 500GB Samsung 850 Pro SSD | 1TB Samsung 850 Pro SSD | Windows 10 Pro | Roland OCTA-CAPTURE | SONAR Platinum ∞ FFS| Too many VSTi's to list here | KRK KNS-8400 Headphones | Roland JP-8000 | Oberheim OB12 | Novation Nova | Gibson SG Special | PRS Studio
#10
patm300e
Max Output Level: -74 dBFS
  • Total Posts : 845
  • Joined: 2007/09/28 09:14:18
  • Location: USA - Maryland
  • Status: offline
Re: Covering Amp / Mic with thick layers of cloth with good result 2017/04/21 12:06:32 (permalink) ☄ Helpfulby synkrotron 2017/04/21 12:09:51
synkrotron
Interesting... I always DI because I don't want to upset the neighbours.

Might try the blanket idea. My amp isn't great, a low end Blackstar combi but still, it's worth giving it a go.

I only have a choice of three mics, two condenser and an SM58 beta. Which do you think is the best to use?

cheers

andy

Why not try them ALL (especially if you can record all of them simultaneously!)  If you can't record all of them together, try them one at a time in the same place.  Ideally, have someone play while you move the mike & listen to find that sweet spot.  Once you have that determined, put each mike in that place and record each one.  Use the one you like the best!

SPLAT on a Home built i3 16 GB RAM 64-bit Windows 10 Home Premium 120GB SSD (OS) 2TB Data Drive.  Behringer XR-18 USB 2.0 Interface. FaderPort control.
#11
synkrotron
Max Output Level: -22.5 dBFS
  • Total Posts : 5263
  • Joined: 2006/04/28 16:21:21
  • Location: Warrington, UK
  • Status: offline
Re: Covering Amp / Mic with thick layers of cloth with good result 2017/04/21 12:11:11 (permalink)
patm300e

Why not try them ALL (especially if you can record all of them simultaneously!)  If you can't record all of them together, try them one at a time in the same place.  Ideally, have someone play while you move the mike & listen to find that sweet spot.  Once you have that determined, put each mike in that place and record each one.  Use the one you like the best!




Thanks Pat. Sounds like a great idea

http://www.synkrotron.co.uk/
Intel Core™i7-3820QM Quad Core Mobile Processor 2.70GHz 8MB cache | Intel HM77 Express Chipset | 16GB SAMSUNG 1600MHz SODIMM DDR3 RAM | NVIDIA GeForce GTX 675M - 2.0GB DDR5 Video RAM | 500GB Samsung 850 Pro SSD | 1TB Samsung 850 Pro SSD | Windows 10 Pro | Roland OCTA-CAPTURE | SONAR Platinum ∞ FFS| Too many VSTi's to list here | KRK KNS-8400 Headphones | Roland JP-8000 | Oberheim OB12 | Novation Nova | Gibson SG Special | PRS Studio
#12
Slugbaby
Max Output Level: -33.5 dBFS
  • Total Posts : 4172
  • Joined: 2004/10/01 13:57:37
  • Location: Toronto, Canada
  • Status: offline
Re: Covering Amp / Mic with thick layers of cloth with good result 2017/04/21 13:37:38 (permalink)
synkrotron
Another thought that I have had, regarding this method is, you lose out on that feeling you get when you are "fighting" the guitar/amp not to feedback, if you know what I mean... It's right on the edge and you know that if you let it, the strings would scream, but they don't because you are holding it back with your hands on the neck and at the bridge.
 
It's hard for me to explain, because, although I have been trying to play guitar, I've never been that good and most of the time I have simply DI'd. But, when I was in my early twenties and I didn't care much about my neighbours, I turned my Park amp up to that point I am trying to explain, and it sounded a whole lot different, and the guitar played a lot different, with the interaction between the sound from the amp, trying to set the stings to vibrate, and back through the pick-up and so on.
 
With this method, you will lose that "feeling."
 
Does any of that make sense?


I think you need the volume to play with feedback, and that's going to be problematic if you've got neighbours.  I don't think there's a quiet way to do that.
Unless perhaps there's a way to route inside Sonar that would give you the feedback...

http://www.MattSwiftMusic.com
 
Dell i5, 16Gb RAM, Focusrite 2i2 IO, Telecasters, P-bases, Personal Drama for a muse.
#13
gswitz
Max Output Level: -18.5 dBFS
  • Total Posts : 5694
  • Joined: 2007/06/16 07:17:14
  • Location: Richmond Virginia USA
  • Status: offline
Re: Covering Amp / Mic with thick layers of cloth with good result 2017/04/21 18:31:08 (permalink)
tomixornot
gswitz
Idk why but it is much easier to get great sound with the amp above five.

I started out to reduce the room air cond noise :)



I solve room noise the same as I solve the rattle in my car. Turn it up. :-)

StudioCat > I use Windows 10 and Sonar Platinum. I have a touch screen.
I make some videos. This one shows how to do a physical loopback on the RME UCX to get many more equalizer nodes.
#14
tlw
Max Output Level: -49.5 dBFS
  • Total Posts : 2567
  • Joined: 2008/10/11 22:06:32
  • Location: West Midlands, UK
  • Status: offline
Re: Covering Amp / Mic with thick layers of cloth with good result 2017/04/21 21:20:52 (permalink)
Slugbaby
I think you need the volume to play with feedback, and that's going to be problematic if you've got neighbours.  I don't think there's a quiet way to do that.
Unless perhaps there's a way to route inside Sonar that would give you the feedback...


Guitar "feedback" - the kind of self-sustaining note kind not random squeals from unpotted pickups - has at least as much to do with gain as it does volume.

I can kick my SG into it in front of nearfields running at 85dBA fed by a Sansamp pedal pretty easily, and yes, it records as guitar feedback even though there's no mic involved. Because that kind of feedback has nothing to do with the kind you get when a mic picks up it's own signal.

I can do a similar trick using a sub-one Watt guitar amp and a 10" Greenback so long as there's something like a Muff or cranked Fuzz Face involved. And the noise is barely audible through house plasterboard walls or doors even though it feels like it ought to be. It's amazing just how big and loud a good quarter or half Watt amp can sound and feel.

To get power amp overdrive amps do need to be cranked a bit. Which is why anything usable on stage doesn't sound so good at domestic levels. Even 5 Watt "home practice amps" are really only half as loud as a 50 Watter through the same speaker. An awful lot of good music has been recorded using overdriving Tweed and Blackface era Fender Champs and similar small combos.

Sonar Platinum 64bit, Windows 8.1 Pro 64bit, I7 3770K Ivybridge, 16GB Ram, Gigabyte Z77-D3H m/board,
ATI 7750 graphics+ 1GB RAM, 2xIntel 520 series 220GB SSDs, 1 TB Samsung F3 + 1 TB WD HDDs, Seasonic fanless 460W psu, RME Fireface UFX, Focusrite Octopre.
Assorted real synths, guitars, mandolins, diatonic accordions, percussion, fx and other stuff.
#15
sharke
Max Output Level: 0 dBFS
  • Total Posts : 13933
  • Joined: 2012/08/03 00:13:00
  • Location: NYC
  • Status: offline
Re: Covering Amp / Mic with thick layers of cloth with good result 2017/04/26 00:33:05 (permalink)
If you've got some $$$'s to spare you might try one of these, and let's face it, you'd be spending less than a lot of plugins....

https://www.sweetwater.co...PJPaunMyGudhoCGm3w_wcB

James
Windows 10, Sonar SPlat (64-bit), Intel i7-4930K, 32GB RAM, RME Babyface, AKAI MPK Mini, Roland A-800 Pro, Focusrite VRM Box, Komplete 10 Ultimate, 2012 American Telecaster!
#16
Jump to:
© 2024 APG vNext Commercial Version 5.1