space_cowboy
Max Output Level: 0 dBFS
- Total Posts : 9813
- Joined: 2007/07/20 14:49:31
- Location: Front and center behind these monitors
- Status: offline
Newest Update and RME Driver no longer there
I hope this is not a coincidence. It would be nice to figure this out.
Here goes -
I installed the 6.0 whatever (the new early release) update yesterday. Messed around with sonar for a few hours. Turned off my pc.
Today, my RME FF800 is not booting. The sound thing in control panel doesnt show it installed. I downloaded the newest drivers - no dice.
Rebooted, tried with rme power off and new driver install - nada.
fortunately my audio files are on a separate drive and if it comes to it, I can do a system restore. But that bites.
Anyone having driver problems post the update?
Or has my RME bit the dust?
Some people call me Maurice SPLAT Pro lifetime, ADK 6 core 3.6Ghz with 32 GB RAM, SSD 1TB system drive, 3 3TB regular drives for samples, recordings and misc. Behringer X Touch, UAD Apollo Quad. 2 UAD2 Quads PCI (i think - inside the box whatever that is), Console 1. More guitars (40??) and synths (hard and soft) than talent. Zendrum!!!
|
joakes
Max Output Level: -72 dBFS
- Total Posts : 905
- Joined: 2006/12/05 15:51:24
- Location: 465 Km South West of Paris
- Status: offline
Re: Newest Update and RME Driver no longer there
2017/06/27 06:03:52
(permalink)
After the latest W10 update, creator, my fMS irewire drivers were for some reason hosed.
I thought it was my LS56, even sent it away to get fixed. Very red faced when i went through Device Manager and found a ! next to the Microsoft FW drver. Re-installed it and eveything is working great.
This tale of woe may help you.
Otherwise if you can try your RME on a different PC, and get the same results, then its off to the repair shop.
Good luck,
Jerry
Built by yours truely : I7-2600@3.4GHz, Asus P67Z68, W10x64 Creator Edition, 32GB RAM, 3 HD's, nVidia 760 GT, Focusrite 18i20 2,d Gen + Ti FW, Oxygen 61 iv Gen, and Edirol SD-20 (yes it works), CbB, Teles, Strats, LP's, Epi Riviera, etc
|
SF_Green
Max Output Level: -62 dBFS
- Total Posts : 1403
- Joined: 2005/09/13 20:37:55
- Location: San Francisco
- Status: offline
Re: Newest Update and RME Driver no longer there
2017/06/27 09:43:18
(permalink)
space_cowboy
I hope this is not a coincidence. It would be nice to figure this out.
Here goes -
I installed the 6.0 whatever (the new early release) update yesterday. Messed around with sonar for a few hours. Turned off my pc.
Today, my RME FF800 is not booting. The sound thing in control panel doesnt show it installed. I downloaded the newest drivers - no dice.
Rebooted, tried with rme power off and new driver install - nada.
fortunately my audio files are on a separate drive and if it comes to it, I can do a system restore. But that bites.
Anyone having driver problems post the update?
Or has my RME bit the dust?
I'm running the early release too, and my FF800 is fine. You on Win7, 8, or 10?
AMD FX-8370, Gigabyte 990FXA-UD3, Win7x64 SP1, 16Gb CorsairDDR3-1600, GeForce GTX 950 (390.65), SSD 525Gb (OS), SATA 3 & 1.5Tb, MOTU microlite, RME FireFace 800 (D 3.124, fw 2.77), UAD-2Q, Adam A7X, A-800 PRO, CC121 Cubase Pro 10.0.5, SonarPt- 2017.10 (x64), Reason10.2, Live 10.0.5 Suite, Wavelab Elements 9.5.40, Komplete10Ult, POD Farm2.5, Omnisphere2.5, BFD3, Alesis QS7.1, Arturia BeatStep Pro, POD HD500, Alesis ControlPad, ARP Omni, many things with strings. GrSltz My Studio
|
DeeringAmps
Max Output Level: -49 dBFS
- Total Posts : 2614
- Joined: 2005/10/03 10:29:25
- Location: Seattle area
- Status: offline
Re: Newest Update and RME Driver no longer there
2017/06/27 13:40:10
(permalink)
Win 7, RME Babyface driver 1.097, Splat 2017.06; no issues!
Haven't installed 06 in the Studio yet, same drivers for the UFX; expect no issues.
Of course the Babyface is USB and I'm using USB with the UFX.
Win 10 firewire issue?
T
Tom Deering Tascam FW-1884 User Resources Page Firewire "Legacy" Tutorial, Service Manual, Schematic, and Service Bulletins Win10x64 StudioCat Pro Studio Coffee Lake 8086k 32gb RAM  RME UFX (Audio) Tascam FW-1884 (Control) in Win 10x64 Pro
|
space_cowboy
Max Output Level: 0 dBFS
- Total Posts : 9813
- Joined: 2007/07/20 14:49:31
- Location: Front and center behind these monitors
- Status: offline
Re: Newest Update and RME Driver no longer there
2017/06/27 14:00:03
(permalink)
joakes
After the latest W10 update, creator, my fMS irewire drivers were for some reason hosed.
I thought it was my LS56, even sent it away to get fixed. Very red faced when i went through Device Manager and found a ! next to the Microsoft FW drver. Re-installed it and eveything is working great.
This tale of woe may help you.
Otherwise if you can try your RME on a different PC, and get the same results, then its off to the repair shop.
Good luck,
Jerry
Jerry I can only find one device in the device manager that no longer has a driver associated with it. I cannot find where the RME driver installer is putting my driver to point the device manager there. Do you know where they install? It certainly was not under the drivers directory in Win 10. Thanks.
Some people call me Maurice SPLAT Pro lifetime, ADK 6 core 3.6Ghz with 32 GB RAM, SSD 1TB system drive, 3 3TB regular drives for samples, recordings and misc. Behringer X Touch, UAD Apollo Quad. 2 UAD2 Quads PCI (i think - inside the box whatever that is), Console 1. More guitars (40??) and synths (hard and soft) than talent. Zendrum!!!
|
space_cowboy
Max Output Level: 0 dBFS
- Total Posts : 9813
- Joined: 2007/07/20 14:49:31
- Location: Front and center behind these monitors
- Status: offline
Re: Newest Update and RME Driver no longer there
2017/06/27 14:01:34
(permalink)
SF Green - Win 10 latest. But Win updated without an issue.
I hope it is not hardware on the fritz. I love my RMEs.
Some people call me Maurice SPLAT Pro lifetime, ADK 6 core 3.6Ghz with 32 GB RAM, SSD 1TB system drive, 3 3TB regular drives for samples, recordings and misc. Behringer X Touch, UAD Apollo Quad. 2 UAD2 Quads PCI (i think - inside the box whatever that is), Console 1. More guitars (40??) and synths (hard and soft) than talent. Zendrum!!!
|
river
Max Output Level: -79 dBFS
- Total Posts : 597
- Joined: 2004/02/06 14:37:35
- Location: Franklin, TN
- Status: offline
Re: Newest Update and RME Driver no longer there
2017/06/27 21:31:52
(permalink)
Quote:
Jerry
I can only find one device in the device manager that no longer has a driver associated with it.
I cannot find where the RME driver installer is putting my driver to point the device manager there.
Do you know where they install? It certainly was not under the drivers directory in Win 10.
Thanks.
Try this: Use the Search box in the Start menu and type in *.RME.dll or just *.dll, or if you know the exact name of the driver file, type that. Windows should reveal the file path for you.
|
space_cowboy
Max Output Level: 0 dBFS
- Total Posts : 9813
- Joined: 2007/07/20 14:49:31
- Location: Front and center behind these monitors
- Status: offline
Re: Newest Update and RME Driver no longer there
2017/06/28 20:49:47
(permalink)
will try that when I get home River. Thanks.
Some people call me Maurice SPLAT Pro lifetime, ADK 6 core 3.6Ghz with 32 GB RAM, SSD 1TB system drive, 3 3TB regular drives for samples, recordings and misc. Behringer X Touch, UAD Apollo Quad. 2 UAD2 Quads PCI (i think - inside the box whatever that is), Console 1. More guitars (40??) and synths (hard and soft) than talent. Zendrum!!!
|
SF_Green
Max Output Level: -62 dBFS
- Total Posts : 1403
- Joined: 2005/09/13 20:37:55
- Location: San Francisco
- Status: offline
Re: Newest Update and RME Driver no longer there
2017/06/28 21:16:26
(permalink)
They're in C:\Windows\System32 in Win 7 (x64).
fireface.inf
fireface_asio.dll
fireface_asio_64.dll
along with the executables for the settings and TotalMix
AMD FX-8370, Gigabyte 990FXA-UD3, Win7x64 SP1, 16Gb CorsairDDR3-1600, GeForce GTX 950 (390.65), SSD 525Gb (OS), SATA 3 & 1.5Tb, MOTU microlite, RME FireFace 800 (D 3.124, fw 2.77), UAD-2Q, Adam A7X, A-800 PRO, CC121 Cubase Pro 10.0.5, SonarPt- 2017.10 (x64), Reason10.2, Live 10.0.5 Suite, Wavelab Elements 9.5.40, Komplete10Ult, POD Farm2.5, Omnisphere2.5, BFD3, Alesis QS7.1, Arturia BeatStep Pro, POD HD500, Alesis ControlPad, ARP Omni, many things with strings. GrSltz My Studio
|