(Solved) No singal showing on master bus and hardware outs

Author
Post
Essentials Only Full Version
Mosvalve
Max Output Level: -67 dBFS
  • Total Posts : 1194
  • Joined: 2009/11/20 20:49:33
  • Location: New Jersey
  • Status: offline
2017/07/16 01:42:11 (permalink)

(Solved) No singal showing on master bus and hardware outs

When I record a track say guitar, I see the signal in the track I'm recording but no signal on the master bus and hardware outs in Sonar. I can't figure out why. Anyone had this happen. I have the latest update. I don't recall this happening in the previous update. I haven't had a chance to roll back to previous version yet.
 
Thanks
post edited by Mosvalve - 2017/07/16 15:13:44

BobV 
 
 
 
ASUS Prime Z370-P - Intel Core i7+ 8700K 3.7GHZ 16GB Memory, Intel HD Graphics 630 GPU,  Windows 10 Pro 64bit,  , Sonar Platinum 64bit, Motu 828MK3 Hybrid, Warm Audio TB12 Pre, Warm Audio WA273 Pre, AEA RPQ 500 Pre, Warm Audio WA76 Compressor, Presonus D8 Pre, Tonelux EQ5P 500 Eq, Kush Electra 500 Eq, Lindell PEX 500 Eq, Yamaha 80M monitors with HS10W Sub,  and a bunch of other good stuff. I have a Roland Juno-106 that's looking for a new home. PM me.
#1

3 Replies Related Threads
    Bristol_Jonesey
    Max Output Level: 0 dBFS
    • Total Posts : 16775
    • Joined: 2007/10/08 15:41:17
    • Location: Bristol, UK
    • Status: offline
    Re: No singal showing on master bus and hardware outs 2017/07/16 09:42:14 (permalink)
    Where is the output of the track routed to?
    Are your master bus faders at 0dB?
    Any plugins on the master buss?

    CbB, Platinum, 64 bit throughout
    Custom built i7 3930, 32Gb RAM, 2 x 1Tb Internal HDD, 1 x 1TB system SSD (Win 7), 1 x 500Gb system SSD (Win 10), 2 x 1Tb External HDD's, Dual boot Win 7 & Win 10 64 Bit, Saffire Pro 26, ISA One, Adam P11A,
    #2
    Mosvalve
    Max Output Level: -67 dBFS
    • Total Posts : 1194
    • Joined: 2009/11/20 20:49:33
    • Location: New Jersey
    • Status: offline
    Re: No singal showing on master bus and hardware outs 2017/07/16 14:46:59 (permalink)
    Bristol_Jonesey
    Where is the output of the track routed to?
    Are your master bus faders at 0dB?
    Any plugins on the master buss?


    Output of track I'm recording is going to master bus. There are no plugins on master or the recording track. All faders are at unity 0db

    BobV 
     
     
     
    ASUS Prime Z370-P - Intel Core i7+ 8700K 3.7GHZ 16GB Memory, Intel HD Graphics 630 GPU,  Windows 10 Pro 64bit,  , Sonar Platinum 64bit, Motu 828MK3 Hybrid, Warm Audio TB12 Pre, Warm Audio WA273 Pre, AEA RPQ 500 Pre, Warm Audio WA76 Compressor, Presonus D8 Pre, Tonelux EQ5P 500 Eq, Kush Electra 500 Eq, Lindell PEX 500 Eq, Yamaha 80M monitors with HS10W Sub,  and a bunch of other good stuff. I have a Roland Juno-106 that's looking for a new home. PM me.
    #3
    Mosvalve
    Max Output Level: -67 dBFS
    • Total Posts : 1194
    • Joined: 2009/11/20 20:49:33
    • Location: New Jersey
    • Status: offline
    Re: No singal showing on master bus and hardware outs 2017/07/16 15:13:18 (permalink)
    OK my bad. I don't monitor through Sonar(input echo) so it turns out when monitoring through my interface software the signal doesn't show in the master bus. If I use input echo the signal shows in the master bus. I never noticed this before. So I am assuming I am correct on this and will mark the threat solved.
     

    BobV 
     
     
     
    ASUS Prime Z370-P - Intel Core i7+ 8700K 3.7GHZ 16GB Memory, Intel HD Graphics 630 GPU,  Windows 10 Pro 64bit,  , Sonar Platinum 64bit, Motu 828MK3 Hybrid, Warm Audio TB12 Pre, Warm Audio WA273 Pre, AEA RPQ 500 Pre, Warm Audio WA76 Compressor, Presonus D8 Pre, Tonelux EQ5P 500 Eq, Kush Electra 500 Eq, Lindell PEX 500 Eq, Yamaha 80M monitors with HS10W Sub,  and a bunch of other good stuff. I have a Roland Juno-106 that's looking for a new home. PM me.
    #4
    Jump to:
    © 2024 APG vNext Commercial Version 5.1