AlChuck
Max Output Level: -89 dBFS
- Total Posts : 66
- Joined: 2007/11/18 16:07:29
- Location: San Mateo, CA, USA
- Status: offline
Problem recording POD HD digital into Focusrite Scarlett 6i6
Does anyone out there use a POD HD with its S/PDIF output routed to a Focusrite Scarlett 6i6? I cannot seem to get a signal to appear in SONAR. I set the Focusrite Control to its configuration preset named "Analogue + Digital," which sets the S/PDIF as the clock source. In SONAR all looks fine but I see no signal entering from the S/PDIF input.
SONAR Platinum (64 bit), Windows 10 (64 bit), custom-built PC with Intel Core i5 CPU 3.10 Ghz, 16 GB RAM, Focusrite Scarlett 6i6 audio interface (USB 2.0), Seagate 5-TB hard drive, Intel HD graphics
|
Zargg
Max Output Level: 0 dBFS
- Total Posts : 10666
- Joined: 2014/09/28 04:20:14
- Location: Norway
- Status: offline
Re: Problem recording POD HD digital into Focusrite Scarlett 6i6
2017/07/30 20:54:30
(permalink)
Hi. I don't have a 6i6, but I have recorded my POD HD500 several times using S/PDIF.
Have you checked the Mix Control (if that is the correct name) on your 6i6, to make sure the digital input received from the POD?
Do you have it connected via USB at the same time? If so, uncheck it in Preferences as a device.
All the best.
Ken Nilsen ZarggBBZWin 10 Pro X64, Cakewalk by Bandlab, SPlat X64, AMD AM3+ fx-8320, 16Gb RAM, RME Ucx (+ ARC), Tascam FW 1884, M-Audio Keystation 61es, *AKAI MPK Pro 25, *Softube Console1, Alesis DM6 USB, Maschine MkII Laptop setup: Win 10 X64, i5 2.4ghz, 8gb RAM, 320gb 7200 RPM HD, Focusrite Solo, + *
|
AlChuck
Max Output Level: -89 dBFS
- Total Posts : 66
- Joined: 2007/11/18 16:07:29
- Location: San Mateo, CA, USA
- Status: offline
Re: Problem recording POD HD digital into Focusrite Scarlett 6i6
2017/08/01 05:13:50
(permalink)
Thanks for the reply, Zargg. I don't see any signal from it in the Focusrite Control app. So maybe there something on the POD I need to set to enable it sending data out the S/PDIF port...
SONAR Platinum (64 bit), Windows 10 (64 bit), custom-built PC with Intel Core i5 CPU 3.10 Ghz, 16 GB RAM, Focusrite Scarlett 6i6 audio interface (USB 2.0), Seagate 5-TB hard drive, Intel HD graphics
|
AlChuck
Max Output Level: -89 dBFS
- Total Posts : 66
- Joined: 2007/11/18 16:07:29
- Location: San Mateo, CA, USA
- Status: offline
Re: Problem recording POD HD digital into Focusrite Scarlett 6i6
2017/08/06 22:51:42
(permalink)
I managed to get it to work.
In SONAR, in the Preferences dialog, set Record Timing Master to Focusrite USB ASIO S/PDIF, and match the settings the POD HD has for sampling rate (48 kHz, in this case).
In Focusrite Control, under Device Settings, set the Sample Rate to 48kHz and select S/PDIF for Clock Source.
SONAR Platinum (64 bit), Windows 10 (64 bit), custom-built PC with Intel Core i5 CPU 3.10 Ghz, 16 GB RAM, Focusrite Scarlett 6i6 audio interface (USB 2.0), Seagate 5-TB hard drive, Intel HD graphics
|
Zargg
Max Output Level: 0 dBFS
- Total Posts : 10666
- Joined: 2014/09/28 04:20:14
- Location: Norway
- Status: offline
Re: Problem recording POD HD digital into Focusrite Scarlett 6i6
2017/08/07 11:05:55
(permalink)
Glad you got it working 
Ken Nilsen ZarggBBZWin 10 Pro X64, Cakewalk by Bandlab, SPlat X64, AMD AM3+ fx-8320, 16Gb RAM, RME Ucx (+ ARC), Tascam FW 1884, M-Audio Keystation 61es, *AKAI MPK Pro 25, *Softube Console1, Alesis DM6 USB, Maschine MkII Laptop setup: Win 10 X64, i5 2.4ghz, 8gb RAM, 320gb 7200 RPM HD, Focusrite Solo, + *
|