Shaade
Max Output Level: -90 dBFS
- Total Posts : 10
- Joined: 2016/12/13 19:33:42
- Status: offline
Sonar 8.5 Producer: Select-Tool Fade Issue (Answered)
Hello~ For some reason, I can't get the fading function to work with the select tool. The manual states to simply drag the top left/right corners of a clip with the select tool to create a fade in/out. However, when I attempt to do this, the whole clip end will drag to extend/crop the clip rather than add the fade. I can even see the small triangular icons appearing where i'm supposed to click and drag - but as I said, it just refuses to work. Can anyone help, please?
post edited by Shaade - 2017/08/10 20:33:42
|
chuckebaby
Max Output Level: 0 dBFS
- Total Posts : 13146
- Joined: 2011/01/04 14:55:28
- Status: offline
Re: Sonar 8.5 Producer: Select-Tool Fade Issue
2017/08/07 19:10:42
(permalink)
The clips ends have different "Hit Zones" Top part/Lower part.
Grab from the top portion of the clip. The lower portion is for slip editing, the upper part of the clip is for fades.
Tim is right, try zooming out.
Windows 8.1 X64 Sonar Platinum x64 Custom built: Asrock z97 1150 - Intel I7 4790k - 16GB corsair DDR3 1600 - PNY SSD 220GBFocusrite Saffire 18I8 - Mackie Control
|
timidi
Max Output Level: -21 dBFS
- Total Posts : 5449
- Joined: 2006/04/11 12:55:15
- Location: SE Florida
- Status: offline
Re: Sonar 8.5 Producer: Select-Tool Fade Issue
2017/08/07 19:19:28
(permalink)
☄ Helpfulby Shaade 2017/08/10 20:32:40
zoom out a little. doesn't work too well when zoomed way in.
|
Shaade
Max Output Level: -90 dBFS
- Total Posts : 10
- Joined: 2016/12/13 19:33:42
- Status: offline
Re: Sonar 8.5 Producer: Select-Tool Fade Issue
2017/08/08 15:57:02
(permalink)
timidi
zoom out a little. doesn't work too well when zoomed way in.
Not working either :(
|
Cactus Music
Max Output Level: 0 dBFS
- Total Posts : 8424
- Joined: 2004/02/09 21:34:04
- Status: offline
Re: Sonar 8.5 Producer: Select-Tool Fade Issue
2017/08/08 16:10:15
(permalink)
☄ Helpfulby Shaade 2017/08/10 20:32:33
Is this midi or audio track? Offset mode? It should work and if you see the little red triangle that would seem to show it wants to work. But possibly your in a edit mode that blocks this function.. I have 8.5 on my DAW but will be 2 days before I'll have time to check.
|
chuckebaby
Max Output Level: 0 dBFS
- Total Posts : 13146
- Joined: 2011/01/04 14:55:28
- Status: offline
Re: Sonar 8.5 Producer: Select-Tool Fade Issue
2017/08/08 16:49:03
(permalink)
is it possible the clip lock is on ?
Windows 8.1 X64 Sonar Platinum x64 Custom built: Asrock z97 1150 - Intel I7 4790k - 16GB corsair DDR3 1600 - PNY SSD 220GBFocusrite Saffire 18I8 - Mackie Control
|
Shaade
Max Output Level: -90 dBFS
- Total Posts : 10
- Joined: 2016/12/13 19:33:42
- Status: offline
Re: Sonar 8.5 Producer: Select-Tool Fade Issue
2017/08/10 15:51:31
(permalink)
Cactus Music
Is this midi or audio track? Offset mode? It should work and if you see the little red triangle that would seem to show it wants to work. But possibly your in a edit mode that blocks this function.. I have 8.5 on my DAW but will be 2 days before I'll have time to check.
It's a midi track. Since you mentioned that, I tried it on an audio track and it's working fine there. I assume then that it does not work on midi?
|
savoy
Max Output Level: -88 dBFS
- Total Posts : 148
- Joined: 2015/02/13 09:22:03
- Location: CA quebec
- Status: offline
Re: Sonar 8.5 Producer: Select-Tool Fade Issue
2017/08/10 16:01:00
(permalink)
right, it only work with audio-clip..
(apologise for my english) sonar 5 std-m-audio windows xp quad-core pcJBL SPEAKER,RHODE NTK MIC.APEX 160
|
savoy
Max Output Level: -88 dBFS
- Total Posts : 148
- Joined: 2015/02/13 09:22:03
- Location: CA quebec
- Status: offline
Re: Sonar 8.5 Producer: Select-Tool Fade Issue
2017/08/10 16:15:24
(permalink)
☄ Helpfulby Shaade 2017/08/10 20:32:26
if you freeze the track you will be able to apply fade-in & fade-out..
martin
(apologise for my english) sonar 5 std-m-audio windows xp quad-core pcJBL SPEAKER,RHODE NTK MIC.APEX 160
|
soens
Max Output Level: -23.5 dBFS
- Total Posts : 5154
- Joined: 2005/09/16 03:19:55
- Location: Location: Location
- Status: offline
Re: Sonar 8.5 Producer: Select-Tool Fade Issue
2017/08/10 17:45:00
(permalink)
☄ Helpfulby Shaade 2017/08/10 20:32:12
^^^ In other words... when using soft synths with separate midi and synth tracks, you can apply the fade to the synth track after freezing it. This also applies to a single midi/instrument track, but you'll loose the midi data when freezing.
If you're using an outboard (real) synth with the midi track, you'll have to real-time record the track before being able to apply any fades.
You can also use cc 7 (volume) to effect a fade on the midi track. That way the affect is there no matter what synth or voice is triggered by it.
|
Shaade
Max Output Level: -90 dBFS
- Total Posts : 10
- Joined: 2016/12/13 19:33:42
- Status: offline
Re: Sonar 8.5 Producer: Select-Tool Fade Issue
2017/08/10 20:33:18
(permalink)
|