how can a condenser microphon repeatly go bad?

Author
Rob[at]Sound-Rehab
Max Output Level: -47 dBFS
  • Total Posts : 2819
  • Joined: 2011/02/03 04:31:35
  • Location: Sound-Rehab, Austria
  • Status: offline
2017/08/13 08:11:40 (permalink)

how can a condenser microphon repeatly go bad?

weird and very frustrating story here.
 
bought a pro condenser mic (AKG C414 XLS, ~€1000) via mail order in the UK. lasted one month. then all the sudden developed a very high noise floor like the vocalist would be standing a strong see breeze.
 
sent it back. got it fixed.
 
lasted a year, then same problem. this time back to AKG repair center in Vienna who fixed it and confirmed it is not a chinese clone.
 
lasted a year, broken again. back to AKG Vienna for another fix.
 
now just yesterday. after 3 weeks vacation turned on phantom power and there is the sea breeze again. the mic worked perfectly for 2 years before vacation. I had left it plugged to the same preamp, just covered it. the studio was locked and physically taken off the main power (i.e. 380V mains unplugged) while I was away. so definitely no mechanical impact, no power surge.
 
yet all by itself the mic does not work. none of my other mics (irrespective of price) ever did anything like that. the tech who fixed it twice is no longer answering that email ... so now I need to go searching for the right person to fix that again ...
 
 
anyone of guys familiar enough with the internals of these mics to explain any plausible reason for this always happening?
 
 

GOOD TUNES LAST FOREVER
  +++   Visit the Rehab   +++
 
DAW: Platinum/X3e, win10 64 bit, i7-3930K (6x3.2GHz), Asus Sabertooth X79, 32 GB DDR3 1600MHz, ATI HD 5450, 120 GB SSD OCZ Agility3, 2x 1TB WD HDD SATA 600
Audio-Interface: 2x MOTU 1248 AVB, Focusrite OctoPre, (Roland Octa-Capture)   Control-Surface: VS-700C 
VSTi: WAVES, NI K10u, FabFilter, IK, ... (too many really) 
#1

14 Replies Related Threads

    SF_Green
    Max Output Level: -62 dBFS
    • Total Posts : 1403
    • Joined: 2005/09/13 20:37:55
    • Location: San Francisco
    • Status: offline
    Re: how can a condenser microphon repeatly go bad? 2017/08/13 09:08:03 (permalink)
    Found this over at GS, and sounds similar.

    https://www.gearslutz.com...14-b-xls-problems.html

    AMD FX-8370, Gigabyte 990FXA-UD3,  Win7x64 SP1, 16Gb CorsairDDR3-1600, GeForce GTX 950 (390.65), SSD 525Gb (OS), SATA 3 & 1.5Tb, MOTU microlite, RME FireFace 800 (D 3.124, fw 2.77), UAD-2Q, Adam A7X, A-800 PRO, CC121
    Cubase Pro 10.0.5, SonarPt-2017.10 (x64), Reason10.2, Live 10.0.5 Suite, Wavelab Elements 9.5.40, Komplete10Ult, POD Farm2.5, Omnisphere2.5, BFD3, Alesis QS7.1, Arturia BeatStep Pro, POD HD500, Alesis ControlPad, ARP Omni, many things with strings. GrSltz My Studio
    #2
    fireberd
    Max Output Level: -38 dBFS
    • Total Posts : 3704
    • Joined: 2008/02/25 14:14:28
    • Location: Inverness, FL
    • Status: offline
    Re: how can a condenser microphon repeatly go bad? 2017/08/13 10:17:16 (permalink)
    Since condenser mic's require phantom power, I would look at that as a potential cause.  Have you been using the same phantom power source on the mic's that went bad?

    "GCSG Productions"
    Franklin D-10 Pedal Steel Guitar (primary instrument). Nashville Telecaster, Bass, etc. 
    ASUS ROG Maximus VIII Hero M/B, i7 6700K CPU, 16GB Ram, SSD and conventional hard drives, Win 10 Pro and Win 10 Pro Insider Pre-Release
    Sonar Platinum/CbB. MOTU 896MK3 Hybrid, Tranzport, X-Touch, JBL LSR308 Monitors,  
    Ozone 5,  Studio One 4.1
    ISRC Registered
    Member of Nashville based R.O.P.E. Assn.
    #3
    interpolated
    Max Output Level: -74 dBFS
    • Total Posts : 830
    • Joined: 2015/03/26 17:34:58
    • Status: offline
    Re: how can a condenser microphon repeatly go bad? 2017/08/13 10:38:10 (permalink)
    I think it's a fair analogy that most people will think that because something is produced in China, no love or effort is put into the production. Being a fan of AKG headphones - K271 Mk.2, K702 and really want to get the 812's one day ....
     
    Never realised there was an Inverness also in Florida.

    I have computer stuff.
     
    https://soundcloud.com/sigmadelta
    #4
    Rob[at]Sound-Rehab
    Max Output Level: -47 dBFS
    • Total Posts : 2819
    • Joined: 2011/02/03 04:31:35
    • Location: Sound-Rehab, Austria
    • Status: offline
    Re: how can a condenser microphon repeatly go bad? 2017/08/13 12:42:38 (permalink)
    fireberd
    Since condenser mic's require phantom power, I would look at that as a potential cause.  Have you been using the same phantom power source on the mic's that went bad?




    It's only been the same single mic and it has always been used with a UA LA-610 MK II which BTW I have used with Neumann mics for years without any problems (also doubled checked yesterday when I found the AKG C414 again broken, I went to the Neumann and it was fine a always)
     
    interpolated
    I think it's a fair analogy that most people will think that because something is produced in China, no love or effort is put into the production. Being a fan of AKG headphones - K271 Mk.2, K702 and really want to get the 812's one day ....



    Same here with headphones. I believe AKG pro stuff is still assembled and quality controlled in Europe ... plus they used to have a "cloned product" warning on their homepage. Hence, when the mic went bad first time after a single use, I thought I had bought a replica (which it is not) ...
     
     

    GOOD TUNES LAST FOREVER
      +++   Visit the Rehab   +++
     
    DAW: Platinum/X3e, win10 64 bit, i7-3930K (6x3.2GHz), Asus Sabertooth X79, 32 GB DDR3 1600MHz, ATI HD 5450, 120 GB SSD OCZ Agility3, 2x 1TB WD HDD SATA 600
    Audio-Interface: 2x MOTU 1248 AVB, Focusrite OctoPre, (Roland Octa-Capture)   Control-Surface: VS-700C 
    VSTi: WAVES, NI K10u, FabFilter, IK, ... (too many really) 
    #5
    fireberd
    Max Output Level: -38 dBFS
    • Total Posts : 3704
    • Joined: 2008/02/25 14:14:28
    • Location: Inverness, FL
    • Status: offline
    Re: how can a condenser microphon repeatly go bad? 2017/08/13 13:39:18 (permalink)
    Well, it was a thought.  Being a tech I think of those types of things.

    "GCSG Productions"
    Franklin D-10 Pedal Steel Guitar (primary instrument). Nashville Telecaster, Bass, etc. 
    ASUS ROG Maximus VIII Hero M/B, i7 6700K CPU, 16GB Ram, SSD and conventional hard drives, Win 10 Pro and Win 10 Pro Insider Pre-Release
    Sonar Platinum/CbB. MOTU 896MK3 Hybrid, Tranzport, X-Touch, JBL LSR308 Monitors,  
    Ozone 5,  Studio One 4.1
    ISRC Registered
    Member of Nashville based R.O.P.E. Assn.
    #6
    gswitz
    Max Output Level: -18.5 dBFS
    • Total Posts : 5694
    • Joined: 2007/06/16 07:17:14
    • Location: Richmond Virginia USA
    • Status: offline
    Re: how can a condenser microphon repeatly go bad? 2017/08/13 14:08:03 (permalink)
    I'm sorry for your trouble. I have the same Mic.

    I have had issues with pre amps before.

    I'm thinking hard about your issue because I don't want it. I'm wondering about the switches for pattern and pad. Humidity? Smoke? Temperature? Idk, but it sounds like something in your environment is causing the problem. The pre amp is the most obvious thing.

    Have you tried a different pre? My Neumanns don't have electronic switches in them.
    post edited by gswitz - 2017/08/14 14:35:43

    StudioCat > I use Windows 10 and Sonar Platinum. I have a touch screen.
    I make some videos. This one shows how to do a physical loopback on the RME UCX to get many more equalizer nodes.
    #7
    Jim Roseberry
    Max Output Level: 0 dBFS
    • Total Posts : 9871
    • Joined: 2004/03/23 11:34:51
    • Location: Ohio
    • Status: offline
    Re: how can a condenser microphon repeatly go bad? 2017/08/13 16:22:45 (permalink)
    Sorry to hear about this.  
     
    FWIW, I've owned two C414-XLS mics for the better part of 10 years.
    Never had a problem with them.
    Used them with numerous mic preamps (Neve, Neve clones, UA 610, etc)

    Best Regards,

    Jim Roseberry
    jim@studiocat.com
    www.studiocat.com
    #8
    rumleymusic
    Max Output Level: -60 dBFS
    • Total Posts : 1533
    • Joined: 2006/08/23 18:03:05
    • Location: California
    • Status: offline
    Re: how can a condenser microphon repeatly go bad? 2017/08/22 03:07:34 (permalink)
    What did they do to "fix" it? Did they give you an idea?  Sounds like a ticking time bomb to me, like they are fixing the symptom but not the cause.  I would guess something like a faulty power filtering capacitor is slowly frying a transistor or IC in the audio circuit.  Let the problem go on too long and they are bound to pop.  Only replacing the transistor will not cut it.  Then again, a bad phantom power supply in the preamp could cause the problem too.  You should use a multi meter to check if you are getting a clean 48 volts from the preamp.

    Daniel Rumley
    Rumley Music and Audio Production
    www.rumleymusic.com
    #9
    fireberd
    Max Output Level: -38 dBFS
    • Total Posts : 3704
    • Joined: 2008/02/25 14:14:28
    • Location: Inverness, FL
    • Status: offline
    Re: how can a condenser microphon repeatly go bad? 2017/08/22 10:43:00 (permalink)
    A multimeter won't really show how good the DC signal is.  An Oscilloscope is the best way to tell how good the DC is.

    "GCSG Productions"
    Franklin D-10 Pedal Steel Guitar (primary instrument). Nashville Telecaster, Bass, etc. 
    ASUS ROG Maximus VIII Hero M/B, i7 6700K CPU, 16GB Ram, SSD and conventional hard drives, Win 10 Pro and Win 10 Pro Insider Pre-Release
    Sonar Platinum/CbB. MOTU 896MK3 Hybrid, Tranzport, X-Touch, JBL LSR308 Monitors,  
    Ozone 5,  Studio One 4.1
    ISRC Registered
    Member of Nashville based R.O.P.E. Assn.
    #10
    Rob[at]Sound-Rehab
    Max Output Level: -47 dBFS
    • Total Posts : 2819
    • Joined: 2011/02/03 04:31:35
    • Location: Sound-Rehab, Austria
    • Status: offline
    Re: how can a condenser microphon repeatly go bad? 2017/08/22 11:09:41 (permalink)
    rumleymusic
    What did they do to "fix" it? Did they give you an idea?  Sounds like a ticking time bomb to me, like they are fixing the symptom but not the cause. 




    I asked each time what they fixed but never got an answer, but since the same problem is reoccurring I also do have the feeling they were fixing symptoms but not the cause.
     
    I'm in contact with some tech who promised to get back to me with info on where to ship it to as supposedly the techs themselves want to see it.  Unfortunately AKG despite being an Austrian company no longer does repairs here in Austria ... it has become a weird world. Looks like the mic has to go to Hungary for service ... with my hopes falling for things to be fixed permanently.

    GOOD TUNES LAST FOREVER
      +++   Visit the Rehab   +++
     
    DAW: Platinum/X3e, win10 64 bit, i7-3930K (6x3.2GHz), Asus Sabertooth X79, 32 GB DDR3 1600MHz, ATI HD 5450, 120 GB SSD OCZ Agility3, 2x 1TB WD HDD SATA 600
    Audio-Interface: 2x MOTU 1248 AVB, Focusrite OctoPre, (Roland Octa-Capture)   Control-Surface: VS-700C 
    VSTi: WAVES, NI K10u, FabFilter, IK, ... (too many really) 
    #11
    Joe_A
    Max Output Level: -81 dBFS
    • Total Posts : 458
    • Joined: 2008/07/06 23:16:14
    • Status: offline
    Re: how can a condenser microphon repeatly go bad? 2017/08/22 17:15:11 (permalink)
    interpolated
    I think it's a fair analogy that most people will think that because something is produced in China, no love or effort is put into the production. Being a fan of AKG headphones - K271 Mk.2, K702 and really want to get the 812's one day ....
     
    Never realised there was an Inverness also in Florida.


    Love Inverness Florida....
    Good fishing, good food, five minutes any direction and you're in the country.....

    jambrose@cfl.rr.com  Sonar Plat. Lifetime. Started in Sonar 4, each through 8.5.3PE.
    Scarlett 18i202nd gen., Edirol FA-101, M-Audio Firewire 410, AMD Phenom II 1045T six core processor, 8GB DDR3, AMD Radeon HD 6450, dual displays, 1.5 TB SATA HD, USB 2, Firewire 1394A, 1394B, 18/22 mixer, EV Q-66, Yamaha HS50M monitors, few guitars, Fender Cybertwin SE, Fender Cyber foot controller, Boss RC20-XL, misc pedals, etc. Win Home Prem 64 bit.
    #12
    Joe_A
    Max Output Level: -81 dBFS
    • Total Posts : 458
    • Joined: 2008/07/06 23:16:14
    • Status: offline
    Re: how can a condenser microphon repeatly go bad? 2017/08/22 17:17:52 (permalink)
    Instead of fixing, the factory should replace, after all this. If another goes bad, just reiterating others comments, then look for perhaps local causes..
    Good luck. I know these problems are frustrating..

    jambrose@cfl.rr.com  Sonar Plat. Lifetime. Started in Sonar 4, each through 8.5.3PE.
    Scarlett 18i202nd gen., Edirol FA-101, M-Audio Firewire 410, AMD Phenom II 1045T six core processor, 8GB DDR3, AMD Radeon HD 6450, dual displays, 1.5 TB SATA HD, USB 2, Firewire 1394A, 1394B, 18/22 mixer, EV Q-66, Yamaha HS50M monitors, few guitars, Fender Cybertwin SE, Fender Cyber foot controller, Boss RC20-XL, misc pedals, etc. Win Home Prem 64 bit.
    #13
    Rob[at]Sound-Rehab
    Max Output Level: -47 dBFS
    • Total Posts : 2819
    • Joined: 2011/02/03 04:31:35
    • Location: Sound-Rehab, Austria
    • Status: offline
    Re: how can a condenser microphon repeatly go bad? 2017/08/29 07:19:54 (permalink)
    I got them convinced to finally replace this mic. Fingers crossed a new one should show up in the next few days ...

    GOOD TUNES LAST FOREVER
      +++   Visit the Rehab   +++
     
    DAW: Platinum/X3e, win10 64 bit, i7-3930K (6x3.2GHz), Asus Sabertooth X79, 32 GB DDR3 1600MHz, ATI HD 5450, 120 GB SSD OCZ Agility3, 2x 1TB WD HDD SATA 600
    Audio-Interface: 2x MOTU 1248 AVB, Focusrite OctoPre, (Roland Octa-Capture)   Control-Surface: VS-700C 
    VSTi: WAVES, NI K10u, FabFilter, IK, ... (too many really) 
    #14
    SF_Green
    Max Output Level: -62 dBFS
    • Total Posts : 1403
    • Joined: 2005/09/13 20:37:55
    • Location: San Francisco
    • Status: offline
    Re: how can a condenser microphon repeatly go bad? 2017/08/31 18:58:41 (permalink)
    Rob[atSound-Rehab]
    I got them convinced to finally replace this mic. Fingers crossed a new one should show up in the next few days ...



    Happy to hear that.  Congrats

    AMD FX-8370, Gigabyte 990FXA-UD3,  Win7x64 SP1, 16Gb CorsairDDR3-1600, GeForce GTX 950 (390.65), SSD 525Gb (OS), SATA 3 & 1.5Tb, MOTU microlite, RME FireFace 800 (D 3.124, fw 2.77), UAD-2Q, Adam A7X, A-800 PRO, CC121
    Cubase Pro 10.0.5, SonarPt-2017.10 (x64), Reason10.2, Live 10.0.5 Suite, Wavelab Elements 9.5.40, Komplete10Ult, POD Farm2.5, Omnisphere2.5, BFD3, Alesis QS7.1, Arturia BeatStep Pro, POD HD500, Alesis ControlPad, ARP Omni, many things with strings. GrSltz My Studio
    #15
    Jump to:
    © 2024 APG vNext Commercial Version 5.1