Odd Fade In problem...

Author
yorolpal
Max Output Level: 0 dBFS
  • Total Posts : 13829
  • Joined: 2003/11/20 11:50:37
  • Status: offline
2017/08/15 15:30:17 (permalink)

Odd Fade In problem...

I was working on a commercial project yesterday in SPLAT...2 60 second spots and 2 30 second spots.  After getting them finished I, as per usual, exported them out to a folder on the desktop.  Before sending them off to the client I listened through to each of them.  Oddly, they all had a "fade in" at the beginning that was quite pronounced.  I deleted them and opened SPLAT back up and checked every track and found no fades of any kind.  Exported them again...but the fade ins were there again.  This told me that the fade in must be on the master buss.  So I checked all the plugins and the buss and no fade to be found.  Finally solved the problem by moving all tracks to start about 3 seconds late.  Exported and fades gone.  Then I had to trim up the beginnings in Sound Forge.  Tedious and worrisome.  
 
Anybody have an idea what I might have done to cause this "fade in" weirdness??

https://soundcloud.com/doghouse-riley/tracks 
https://doghouseriley1.bandcamp.com 
Where you come from is gone...where you thought you were goin to weren't never there...and where you are ain't no good unless you can get away from it.
 
SPLAT 64 bit running on a Studio Cat Pro System Win 10 64bit 2.8ghz Core i7 with 24 gigs ram. MOTU Audio Express.
#1

4 Replies Related Threads

    bapu
    Max Output Level: 0 dBFS
    • Total Posts : 86000
    • Joined: 2006/11/25 21:23:28
    • Location: Thousand Oaks, CA
    • Status: offline
    Re: Odd Fade In problem... 2017/08/15 17:30:05 (permalink)
    The new limiter had that bug but was supposedly fixed in the latest CCC Engineering Suite update.
    #2
    dcumpian
    Max Output Level: -34 dBFS
    • Total Posts : 4124
    • Joined: 2005/11/03 15:50:51
    • Status: offline
    Re: Odd Fade In problem... 2017/08/15 17:32:39 (permalink)
    Did they originally start right at the beginning, or did you have a blank measure? I've seen enough weirdness starting a project at 1:01:0000 that I just don't do it anymore.
     
    Dan
     

    Mixing is all about control.
     
    My music:
    http://dancumpian.bandcamp.com/ or https://soundcloud.com/dcumpian Studiocat Advanced Studio DAW (Intel i5 3550 @ 3.7GHz, Z77 motherboard, 16GB Ram, lots of HDDs), Sonar Plat, Mackie 1604, PreSonus Audiobox 44VSL, ESI 4x4 Midi Interface, Ibanez Bass, Custom Fender Mexi-Strat, NI S88, Roland JV-2080 & MDB-1, Komplete, Omnisphere, Lots o' plugins.    
    #3
    yorolpal
    Max Output Level: 0 dBFS
    • Total Posts : 13829
    • Joined: 2003/11/20 11:50:37
    • Status: offline
    Re: Odd Fade In problem... 2017/08/15 17:37:48 (permalink)
    Bet it was the Adaptive Limiter like Bapsi suggested.  I was using it on the master buss on that project.  Will update post haste.
     
    and
    @Dan...yup all my radio spots start right at the beginning...easier to read total time that way.
     

    https://soundcloud.com/doghouse-riley/tracks 
    https://doghouseriley1.bandcamp.com 
    Where you come from is gone...where you thought you were goin to weren't never there...and where you are ain't no good unless you can get away from it.
     
    SPLAT 64 bit running on a Studio Cat Pro System Win 10 64bit 2.8ghz Core i7 with 24 gigs ram. MOTU Audio Express.
    #4
    bapu
    Max Output Level: 0 dBFS
    • Total Posts : 86000
    • Joined: 2006/11/25 21:23:28
    • Location: Thousand Oaks, CA
    • Status: offline
    Re: Odd Fade In problem... 2017/08/15 19:50:41 (permalink)
    yorolpal
    Will update post haste.

    I see what you did there.
    #5
    Jump to:
    © 2024 APG vNext Commercial Version 5.1