Helpful Replyautomating effects

Author
joey90405
Max Output Level: -84 dBFS
  • Total Posts : 324
  • Joined: 2013/05/30 14:53:46
  • Location: chicago
  • Status: offline
2017/09/10 14:00:58 (permalink)

automating effects

hi everyone, finally a musical question!!
this is what i want to do. i have a clip in a solo that i want to add reverb or delay i haven't decided which one yet. however, i want the effect to start at one point then end.
when i try and use "add effect" there is a volume drop at the beginning of the clip. what i want to do is manually write the effect while the track is playing then turn it off at the end of the clip. just like if i want to pan or change volume.
also, whats the difference between "add effect" and "process effect"?
thank you all so much.

OS Name Microsoft Windows 10 Home
Version 10.0.10240 Build 10240  
OS Manufacturer Microsoft Corporation

System Manufacturer HP
System Model HP ENVY m7 Notebook
System Type x64-based PC
System SKU M1W07UA#ABA
Processor Intel(R) Core(TM) i7-5500U CPU @ 2.40GHz, 2401 Mhz, 2 Core(s), 
Installed Physical Memory (RAM) 16.0 GB
Total Physical Memory 15.9 GB
Available Physical Memory 12.8 GB
Total Virtual Memory 18.3 GB
Available Virtual Memory 15.3 GB
 
#1
chuckebaby
Max Output Level: 0 dBFS
  • Total Posts : 13146
  • Joined: 2011/01/04 14:55:28
  • Status: offline
Re: automating effects 2017/09/10 15:04:30 (permalink) ☄ Helpfulby Zargg 2017/09/10 15:55:27
The best way to achieve this in my opinion is to throw a delay/reverb on a bus and automate the send knob.
This method is non destructive unlike process effect which is destructive an non reversible.

Windows 8.1 X64 Sonar Platinum x64
Custom built: Asrock z97 1150 - Intel I7 4790k - 16GB corsair DDR3 1600 - PNY SSD 220GB
Focusrite Saffire 18I8 - Mackie Control
   
#2
Bristol_Jonesey
Max Output Level: 0 dBFS
  • Total Posts : 16775
  • Joined: 2007/10/08 15:41:17
  • Location: Bristol, UK
  • Status: offline
Re: automating effects 2017/09/10 18:26:22 (permalink)
^^^ Yep, this is exactly what I would do.

CbB, Platinum, 64 bit throughout
Custom built i7 3930, 32Gb RAM, 2 x 1Tb Internal HDD, 1 x 1TB system SSD (Win 7), 1 x 500Gb system SSD (Win 10), 2 x 1Tb External HDD's, Dual boot Win 7 & Win 10 64 Bit, Saffire Pro 26, ISA One, Adam P11A,
#3
joey90405
Max Output Level: -84 dBFS
  • Total Posts : 324
  • Joined: 2013/05/30 14:53:46
  • Location: chicago
  • Status: offline
Re: automating effects 2017/09/11 14:42:54 (permalink)
got it, thanks

OS Name Microsoft Windows 10 Home
Version 10.0.10240 Build 10240  
OS Manufacturer Microsoft Corporation

System Manufacturer HP
System Model HP ENVY m7 Notebook
System Type x64-based PC
System SKU M1W07UA#ABA
Processor Intel(R) Core(TM) i7-5500U CPU @ 2.40GHz, 2401 Mhz, 2 Core(s), 
Installed Physical Memory (RAM) 16.0 GB
Total Physical Memory 15.9 GB
Available Physical Memory 12.8 GB
Total Virtual Memory 18.3 GB
Available Virtual Memory 15.3 GB
 
#4
joey90405
Max Output Level: -84 dBFS
  • Total Posts : 324
  • Joined: 2013/05/30 14:53:46
  • Location: chicago
  • Status: offline
Re: automating effects PART 2 2017/09/12 23:32:50 (permalink)
hi everyone, thanks for your advice about automating an effect on a clip. i need to be more specific. i have a verse where on the verse i want a guitar play something on top of whats going on. i'll give an example. on the "rise and fall of ziggy stardust" there is a song called "moonage daydream". towards the end of the song, mick ronson plays a one note solo that the delay/reverb really open up (my word).
i don't want to set up an amp and punch in the part because i want to control how much of the FX is heard. 
what was suggested was, making a bus and sending the clip there then automate it. 
please forgive me, i have no idea how to do that. 
if someone would be so kind to take the time to help a technically challenged guitar player do that? i would be most grateful and if you're anywhere near Chicago i'll buy you lunch. 
thanks so much.
jp

OS Name Microsoft Windows 10 Home
Version 10.0.10240 Build 10240  
OS Manufacturer Microsoft Corporation

System Manufacturer HP
System Model HP ENVY m7 Notebook
System Type x64-based PC
System SKU M1W07UA#ABA
Processor Intel(R) Core(TM) i7-5500U CPU @ 2.40GHz, 2401 Mhz, 2 Core(s), 
Installed Physical Memory (RAM) 16.0 GB
Total Physical Memory 15.9 GB
Available Physical Memory 12.8 GB
Total Virtual Memory 18.3 GB
Available Virtual Memory 15.3 GB
 
#5
chuckebaby
Max Output Level: 0 dBFS
  • Total Posts : 13146
  • Joined: 2011/01/04 14:55:28
  • Status: offline
Re: automating effects PART 2 2017/09/13 12:59:03 (permalink)
1- Create a bus and call it reverb, delay or Jose. It doesn't matter
2- Put the FX in that buses FX bin
3- go to the guitar track you want the delay, reverb or Jose on and click on the plus sign to add a send.
4- Where does the send go ? The Delay, reverb Jose bus.
 
*While the guitar part is playing move that send up and down to get a fell for what a send actually does.
Its sending partial/full signal to the FX unlike an FX bin that's routed through the signal.
 
5- Automate the send control that feeds the FX bus and go eat a pizza.

Windows 8.1 X64 Sonar Platinum x64
Custom built: Asrock z97 1150 - Intel I7 4790k - 16GB corsair DDR3 1600 - PNY SSD 220GB
Focusrite Saffire 18I8 - Mackie Control
   
#6
thedukewestern
Max Output Level: -83 dBFS
  • Total Posts : 387
  • Joined: 2008/04/14 12:06:59
  • Location: NY
  • Status: offline
Re: automating effects PART 2 2017/09/13 13:11:34 (permalink)
Yup - thats it=-)

Be the first one who thinks that you can
 
Sonar Platinum, Windows 7 64 bit - clean install January 2016, Focusrite Pro 40, Outboard Pres, Native Instruments Komplete, Izotope, PSP, Melodyne, Vegetarian
#7
Grem
Max Output Level: -19.5 dBFS
  • Total Posts : 5562
  • Joined: 2005/06/28 09:26:32
  • Location: Baton Rouge Area
  • Status: offline
Re: automating effects PART 2 2017/09/13 13:30:40 (permalink)
What Chuck is telling you is the easiest way to do this.

As a guitar player, I would suggest you put reverb and delay in the FX bin of the newly.created buss and try them both. I know the FX your talking about (love that song btw) and you may get better results throwing in some of both. Also try to arrange the reverb first, then the delay. And then try it the other way. Also use the mix knob to adjust varying amounts. You can automate all parameters in either FX.

Just try it! You will likely spend hours in a daze amazed at what you can create with just those two FX!

Grem

Michael
 
Music PC
i7 2600K; 64gb Ram; 3 256gb SSD, System, Samples, Audio; 1TB & 2TB Project Storage; 2TB system BkUp; RME FireFace 400; Win 10 Pro 64; CWbBL 64, 
Home PC
AMD FX 6300; 8gb Ram; 256 SSD sys; 2TB audio/samples; Realtek WASAPI; Win 10 Home 64; CWbBL 64 
Surface Pro 3
Win 10  i7 8gb RAM; CWbBL 64
#8
chuckebaby
Max Output Level: 0 dBFS
  • Total Posts : 13146
  • Joined: 2011/01/04 14:55:28
  • Status: offline
Re: automating effects PART 2 2017/09/13 15:14:24 (permalink)
The bus/send method is very similar to what we used to do on the analog desks.
On the old Mackie 32-8's  I used to patch a reverb or delay in to the FX send and loop it through the stereo returns.
This would give a mono guitar track a "stereo like signal". Perfect for ping pong delay or spectrum spreading.
 
To break it down in newbie terms:
What a send does essentially is it takes the wet signal (The FX) and mixes it with the Dry signal.
The send knob adjusts how much of the wet signal (FX) you are hearing.
 
Using a tracks FX bin is different in that the whole signal passes through the FX and is varied by the input control of the Reverb or Delay unit (VST) itself.
More often than not when using a send you want your Wet to be at 100% but I have found uses for lower percentages as sometimes 100 can be over bearing even when the send knob is at lower settings. This is because each plug ins dry/wet control is different and react different.
 
 

Windows 8.1 X64 Sonar Platinum x64
Custom built: Asrock z97 1150 - Intel I7 4790k - 16GB corsair DDR3 1600 - PNY SSD 220GB
Focusrite Saffire 18I8 - Mackie Control
   
#9
joey90405
Max Output Level: -84 dBFS
  • Total Posts : 324
  • Joined: 2013/05/30 14:53:46
  • Location: chicago
  • Status: offline
Re: automating effects PART 2 2017/09/14 18:24:42 (permalink)
oh man!! you cats be great. i do believe i understand it, and now will execute it. when i'm done i will post it on my website or someplace and would highly appreciate any criticism you may have.
PS Is there a way to post audio on this forum?
jp

OS Name Microsoft Windows 10 Home
Version 10.0.10240 Build 10240  
OS Manufacturer Microsoft Corporation

System Manufacturer HP
System Model HP ENVY m7 Notebook
System Type x64-based PC
System SKU M1W07UA#ABA
Processor Intel(R) Core(TM) i7-5500U CPU @ 2.40GHz, 2401 Mhz, 2 Core(s), 
Installed Physical Memory (RAM) 16.0 GB
Total Physical Memory 15.9 GB
Available Physical Memory 12.8 GB
Total Virtual Memory 18.3 GB
Available Virtual Memory 15.3 GB
 
#10
Joe_A
Max Output Level: -81 dBFS
  • Total Posts : 458
  • Joined: 2008/07/06 23:16:14
  • Status: offline
Re: automating effects PART 2 2017/09/14 18:51:40 (permalink)
Plus one for the pizza. 😉

jambrose@cfl.rr.com  Sonar Plat. Lifetime. Started in Sonar 4, each through 8.5.3PE.
Scarlett 18i202nd gen., Edirol FA-101, M-Audio Firewire 410, AMD Phenom II 1045T six core processor, 8GB DDR3, AMD Radeon HD 6450, dual displays, 1.5 TB SATA HD, USB 2, Firewire 1394A, 1394B, 18/22 mixer, EV Q-66, Yamaha HS50M monitors, few guitars, Fender Cybertwin SE, Fender Cyber foot controller, Boss RC20-XL, misc pedals, etc. Win Home Prem 64 bit.
#11
Bristol_Jonesey
Max Output Level: 0 dBFS
  • Total Posts : 16775
  • Joined: 2007/10/08 15:41:17
  • Location: Bristol, UK
  • Status: offline
Re: automating effects PART 2 2017/09/14 20:29:52 (permalink)

CbB, Platinum, 64 bit throughout
Custom built i7 3930, 32Gb RAM, 2 x 1Tb Internal HDD, 1 x 1TB system SSD (Win 7), 1 x 500Gb system SSD (Win 10), 2 x 1Tb External HDD's, Dual boot Win 7 & Win 10 64 Bit, Saffire Pro 26, ISA One, Adam P11A,
#12
RSMCGUITAR
Max Output Level: -64 dBFS
  • Total Posts : 1318
  • Joined: 2014/12/27 02:33:15
  • Location: Toronto
  • Status: offline
Re: automating effects PART 2 2017/09/14 21:01:46 (permalink)
One thing I would add is maybe using an aux track instead of a bus. Same process but you can have the effect track right beside your original track
#13
chuckebaby
Max Output Level: 0 dBFS
  • Total Posts : 13146
  • Joined: 2011/01/04 14:55:28
  • Status: offline
Re: automating effects PART 2 2017/09/14 22:20:21 (permalink)
ahh never mind.
 

Windows 8.1 X64 Sonar Platinum x64
Custom built: Asrock z97 1150 - Intel I7 4790k - 16GB corsair DDR3 1600 - PNY SSD 220GB
Focusrite Saffire 18I8 - Mackie Control
   
#14
RSMCGUITAR
Max Output Level: -64 dBFS
  • Total Posts : 1318
  • Joined: 2014/12/27 02:33:15
  • Location: Toronto
  • Status: offline
Re: automating effects PART 2 2017/09/14 22:26:30 (permalink)
But that's not how you would use a bus in this instance.
You don't send the track output to the bus, you create a separate send to the bus. That way both the Track Output and the bus output are routed to the master bus.

EDITED TO ADD THIS:


#15
chuckebaby
Max Output Level: 0 dBFS
  • Total Posts : 13146
  • Joined: 2011/01/04 14:55:28
  • Status: offline
Re: automating effects PART 2 2017/09/14 22:33:01 (permalink)
RSMCGUITAR
But that's not how you would use a bus in this instance.
You don't send the track output to the bus, you create a separate send to the bus. That way both the Track Output and the bus output are routed to the master bus.


interesting idea. I have to explore aux and patch points a little more.
I use buses for groups of tracks like guitars, drums bas, exc. Those tracks are all sent to a Guitar bus, a Drum bus, a Bass bus. And I have FX buses as well. like a Delay bus, reverb bus.
 
I hardly if ever send my straight tracks to the master, they are first sent to buses with bus compression, then they go to the master.
Interesting ideas though. I like it.

Windows 8.1 X64 Sonar Platinum x64
Custom built: Asrock z97 1150 - Intel I7 4790k - 16GB corsair DDR3 1600 - PNY SSD 220GB
Focusrite Saffire 18I8 - Mackie Control
   
#16
RSMCGUITAR
Max Output Level: -64 dBFS
  • Total Posts : 1318
  • Joined: 2014/12/27 02:33:15
  • Location: Toronto
  • Status: offline
Re: automating effects PART 2 2017/09/14 22:41:24 (permalink)
See, I would still use buses like that, but, in this example, I would probably send both the original guitar track and the aux track to my guitar bus.
#17
joey90405
Max Output Level: -84 dBFS
  • Total Posts : 324
  • Joined: 2013/05/30 14:53:46
  • Location: chicago
  • Status: offline
Re: automating effects PART 2 2017/09/16 17:55:10 (permalink)
thanks so much, however, i'm having computer problems, the same error messages are showing up when i try and open sonar. after hours on the phone with geek squad and sweetwater i decided to uninstall/reinstall sonar and so far today it seems to be working.
the errors i'm getting we discussed last week if you want to take a look. This kind of stuff makes me nuts.
a tech at Sweetwater turned me on to a free disk checking thing that will (should) tell if there are any problems with the hard drive. so at least if i need to bring the computer to get repaired i will (at least) be armed with a little knowledge because, for me, it's like bringing the car to a mechanic, they can tell me anything and i have no idea what they're talking about. i could have a tractor motor and not know it.

OS Name Microsoft Windows 10 Home
Version 10.0.10240 Build 10240  
OS Manufacturer Microsoft Corporation

System Manufacturer HP
System Model HP ENVY m7 Notebook
System Type x64-based PC
System SKU M1W07UA#ABA
Processor Intel(R) Core(TM) i7-5500U CPU @ 2.40GHz, 2401 Mhz, 2 Core(s), 
Installed Physical Memory (RAM) 16.0 GB
Total Physical Memory 15.9 GB
Available Physical Memory 12.8 GB
Total Virtual Memory 18.3 GB
Available Virtual Memory 15.3 GB
 
#18
JohnEgan
Max Output Level: -80 dBFS
  • Total Posts : 543
  • Joined: 2014/10/21 10:03:57
  • Location: Ottawa, Ontario, Canada
  • Status: offline
Re: automating effects PART 2 2017/09/16 20:21:36 (permalink)
I appreciate questions like this, for the answers and possibilities, I would have probably just created a new track with that clip part in it, and applied the FX's I wanted to it, mixing in with fader and pan.
 
Cheers 

John Egan
Sonar Platinum (2017-10),RME-UFX, PC-CPU - i7-5820, 3.3 GHz, 6 core, ASUS X99-AII, 16GB ram, GTX 960, 500 GB SSD, 2TB HDD x 2, Win7 Pro x64,  O8N2 Advanced, Melodyne Studio,.... (2 cats :(,  in the yard).
 
#19
chuckebaby
Max Output Level: 0 dBFS
  • Total Posts : 13146
  • Joined: 2011/01/04 14:55:28
  • Status: offline
Re: automating effects PART 2 2017/09/16 20:23:18 (permalink)
joey90405
thanks so much, however, i'm having computer problems, the same error messages are showing up when i try and open sonar. after hours on the phone with geek squad and sweetwater i decided to uninstall/reinstall sonar and so far today it seems to be working.
the errors i'm getting we discussed last week if you want to take a look. This kind of stuff makes me nuts.
a tech at Sweetwater turned me on to a free disk checking thing that will (should) tell if there are any problems with the hard drive. so at least if i need to bring the computer to get repaired i will (at least) be armed with a little knowledge because, for me, it's like bringing the car to a mechanic, they can tell me anything and i have no idea what they're talking about. i could have a tractor motor and not know it.


What kind of hard drive do you have (HD or SSD ? Cache + RPM and what size)?

Windows 8.1 X64 Sonar Platinum x64
Custom built: Asrock z97 1150 - Intel I7 4790k - 16GB corsair DDR3 1600 - PNY SSD 220GB
Focusrite Saffire 18I8 - Mackie Control
   
#20
Jump to:
© 2024 APG vNext Commercial Version 5.1