any way to link VS100 with VS700?

Author
Post
Essentials Only Full Version
shortyedwards
Max Output Level: -89 dBFS
  • Total Posts : 61
  • Joined: 2007/03/01 15:59:10
  • Status: offline
2017/09/19 17:37:41 (permalink)

any way to link VS100 with VS700?

Just a curiosity sort of question as I have both. 
 
Also, can anyone recommend a current HD card for the VS100?  Thanks!
 
-SE
#1

6 Replies Related Threads
    dahjah
    Max Output Level: -84 dBFS
    • Total Posts : 313
    • Joined: 2010/07/31 13:56:51
    • Location: Ontario
    • Status: offline
    Re: any way to link VS100 with VS700? 2017/09/21 00:12:24 (permalink)
    I have them both too and actually never thought of it. I'm sure there must be a way though.

    Windows 8.1 Pro X64 Sonar Platinum x64
    Processor - AMD FX 8350 Eight Core Processor 4GB
    32 GB Memory
    VS 700 System 
    Focusrite Liquid Saffire 56
    (Focusrite is only on when recording)
    #2
    shortyedwards
    Max Output Level: -89 dBFS
    • Total Posts : 61
    • Joined: 2007/03/01 15:59:10
    • Status: offline
    Re: any way to link VS100 with VS700? 2017/09/22 14:57:56 (permalink)
     
    Also, can anyone recommend a current HD card for the VS100?  Thanks!
     
    Anyone use a newer or new 32gig HD card in their VS100's?  I want to get the recommended one (per manual) but they aren't around.  Recommendations?  Thank you.
     
    -SE
    #3
    Rob[at]Sound-Rehab
    Max Output Level: -47 dBFS
    • Total Posts : 2819
    • Joined: 2011/02/03 04:31:35
    • Location: Sound-Rehab, Austria
    • Status: offline
    Re: any way to link VS100 with VS700? 2017/09/29 05:08:06 (permalink)
    shortyedwards
    Just a curiosity sort of question as I have both. 
     



     
    there is the VS EXPAND mode that allows you to use 2 devices of either VS100, VS700R or Octa-Capture and turn it into a common audio interface where you can use I/O from both devices in one common ASIO driver setup
     
    you need to make sure you have matching firmware installed (which should be the latest available)
     
    FWIW - I used VS700R (plus another ADAT preamp) and Octa-Capture together and it worked fine. I did own the VS-100 for a while but never bothered to link it with the VS-700R as the VS-700R had so many IO channels anyway and when I needed more I went for the Octa-Capture
     
    in case you where talking about using the VS-100 and the VS-700C (control surface) together - that's simple, just install the VS-700C as USB device (not connected via VS-700R) and use the VS-100 as you did up to now (audio interface) ... you can set up both in sonar as separate control surfaces

    GOOD TUNES LAST FOREVER
      +++   Visit the Rehab   +++
     
    DAW: Platinum/X3e, win10 64 bit, i7-3930K (6x3.2GHz), Asus Sabertooth X79, 32 GB DDR3 1600MHz, ATI HD 5450, 120 GB SSD OCZ Agility3, 2x 1TB WD HDD SATA 600
    Audio-Interface: 2x MOTU 1248 AVB, Focusrite OctoPre, (Roland Octa-Capture)   Control-Surface: VS-700C 
    VSTi: WAVES, NI K10u, FabFilter, IK, ... (too many really) 
    #4
    shortyedwards
    Max Output Level: -89 dBFS
    • Total Posts : 61
    • Joined: 2007/03/01 15:59:10
    • Status: offline
    Re: any way to link VS100 with VS700? 2017/10/04 14:22:34 (permalink)
    Anyone use a newer or new 32gig HD card in their VS100's?  I want to get the recommended one (per manual) but they aren't around.  Recommendations?  Thank you.
     
    Sorry to bump this up again.  Would like to order one ...
    #5
    FCCfirstclass
    Max Output Level: -71 dBFS
    • Total Posts : 969
    • Joined: 2003/11/15 15:02:42
    • Location: Las Vegas, Nevada
    • Status: offline
    Re: any way to link VS100 with VS700? 2017/10/09 15:37:17 (permalink)
    shortyedwards
    Anyone use a newer or new 32gig HD card in their VS100's?  I want to get the recommended one (per manual) but they aren't around.  Recommendations?  Thank you.
     
    Sorry to bump this up again.  Would like to order one ...




    Hi Shorty.  I use a VS 100 with a 16Bb card. It works fine.  Roland gives specs using an 8gb card which I assume was what the limits of the SD cards were in 2010.   Make sure the card is an HD or XC class.  

    Win 10 Pro x64, 32Gb DDR3 ram, Sonar Platinum, Cubase 9.5, Mackie MCU Pro, Cakewalk VS 100, Roland Octa-Capture,  A 800 Pro, Carver M-1.5t amp & C4000 pre amp, various mics, drums and brass instruments.
     
    And away we go!
    #6
    shortyedwards
    Max Output Level: -89 dBFS
    • Total Posts : 61
    • Joined: 2007/03/01 15:59:10
    • Status: offline
    Re: any way to link VS100 with VS700? 2017/10/12 20:54:37 (permalink)
    Thanks FCC!
    #7
    Jump to:
    © 2024 APG vNext Commercial Version 5.1