mrneil2
Max Output Level: -88 dBFS
- Total Posts : 126
- Joined: 2010/06/09 20:57:28
- Status: offline
Need Help With TG12345 and J37
Ok so I bought the TG12345 and the J37 from Waves and am in a little over my head. Where do I place these in SPLAT?
What I'd like to do is use the TG12345 as my channel strip and then use the J37 as the last thing like the Tape Emulator.
Do I place the TG12345 as the 1st fx and then use post?
Is there anyway to get the J37 down at the bottom like the Cakewalk Tape Simulator?
I really need step by step instructions. I looked through old posts but didn't find any that dealt with setting it up.
Thanks
Software:Platinum Computer: HP Envy i7-3770 CPU @ 3.40GHz , 8GB Ram, 64bit Operating System, Windows 10 Western Digital (1TB) External Hard Drive Roland Octa-Capture M-Audio Keystation 88es
|
Zargg
Max Output Level: 0 dBFS
- Total Posts : 10666
- Joined: 2014/09/28 04:20:14
- Location: Norway
- Status: offline
Re: Need Help With TG12345 and J37
2017/12/31 19:18:19
(permalink)
Hi. An old saying is: If it sounds good, it is good  I would normally as you said above use the TG 1st, and the J37 at the end. Other times you want the tape drive into the channel strip. Do what sounds best to you. All the best.
Ken Nilsen ZarggBBZWin 10 Pro X64, Cakewalk by Bandlab, SPlat X64, AMD AM3+ fx-8320, 16Gb RAM, RME Ucx (+ ARC), Tascam FW 1884, M-Audio Keystation 61es, *AKAI MPK Pro 25, *Softube Console1, Alesis DM6 USB, Maschine MkII Laptop setup: Win 10 X64, i5 2.4ghz, 8gb RAM, 320gb 7200 RPM HD, Focusrite Solo, + *
|
mrneil2
Max Output Level: -88 dBFS
- Total Posts : 126
- Joined: 2010/06/09 20:57:28
- Status: offline
Re: Need Help With TG12345 and J37
2017/12/31 19:28:45
(permalink)
Thanks for the reply but how exactly do I get the j37 at the bottom below the ProChannel? Not just in the fx bin?
Software:Platinum Computer: HP Envy i7-3770 CPU @ 3.40GHz , 8GB Ram, 64bit Operating System, Windows 10 Western Digital (1TB) External Hard Drive Roland Octa-Capture M-Audio Keystation 88es
|
Zargg
Max Output Level: 0 dBFS
- Total Posts : 10666
- Joined: 2014/09/28 04:20:14
- Location: Norway
- Status: offline
Re: Need Help With TG12345 and J37
2017/12/31 19:36:43
(permalink)
☄ Helpfulby Cactus Music 2018/01/01 16:49:01
Ken Nilsen ZarggBBZWin 10 Pro X64, Cakewalk by Bandlab, SPlat X64, AMD AM3+ fx-8320, 16Gb RAM, RME Ucx (+ ARC), Tascam FW 1884, M-Audio Keystation 61es, *AKAI MPK Pro 25, *Softube Console1, Alesis DM6 USB, Maschine MkII Laptop setup: Win 10 X64, i5 2.4ghz, 8gb RAM, 320gb 7200 RPM HD, Focusrite Solo, + *
|
mrneil2
Max Output Level: -88 dBFS
- Total Posts : 126
- Joined: 2010/06/09 20:57:28
- Status: offline
Re: Need Help With TG12345 and J37
2017/12/31 21:55:25
(permalink)
Thanks that was exactly what I needed to know
Software:Platinum Computer: HP Envy i7-3770 CPU @ 3.40GHz , 8GB Ram, 64bit Operating System, Windows 10 Western Digital (1TB) External Hard Drive Roland Octa-Capture M-Audio Keystation 88es
|
Zargg
Max Output Level: 0 dBFS
- Total Posts : 10666
- Joined: 2014/09/28 04:20:14
- Location: Norway
- Status: offline
Re: Need Help With TG12345 and J37
2017/12/31 22:50:49
(permalink)
Glad to be of help 
Ken Nilsen ZarggBBZWin 10 Pro X64, Cakewalk by Bandlab, SPlat X64, AMD AM3+ fx-8320, 16Gb RAM, RME Ucx (+ ARC), Tascam FW 1884, M-Audio Keystation 61es, *AKAI MPK Pro 25, *Softube Console1, Alesis DM6 USB, Maschine MkII Laptop setup: Win 10 X64, i5 2.4ghz, 8gb RAM, 320gb 7200 RPM HD, Focusrite Solo, + *
|
Chregg
Max Output Level: -51.5 dBFS
- Total Posts : 2382
- Joined: 2010/02/22 06:14:27
- Location: Perth, Scotland
- Status: offline
Re: Need Help With TG12345 and J37
2018/01/01 12:11:31
(permalink)
my self personally i put tape emu 1st, on the strength that the signal going into the desk would be coming off tape, and the tg channel strip is a peach, get your audio nice and clean, then use the dynamics/tone control
|
olemon
Max Output Level: -75 dBFS
- Total Posts : 768
- Joined: 2011/10/27 05:35:19
- Status: offline
Re: Need Help With TG12345 and J37
2018/01/01 14:12:51
(permalink)
☄ Helpfulby Cactus Music 2018/01/01 16:48:42
I learned about FX Chains when trying to put the ProChannel Tape Emulator last in the signal chain, just as you want to do with the J37. If you're only using the TG12345 and the J37, but no ProChannel modules on a channel or a bus, then the FX Bin is all you need. But if you want to use ProChannel modules in combination with any non-PC plugins and order them to your liking, then the FX Chain module is the answer. An FX Chain module is like a floating FX Bin in the ProChannel. And since there can be multiple instances of the FX Chain module, it is a very powerful and flexible feature.
https://www.reverbnation.com/scottholson Platinum, Studio One 3 Pro, Win 10 (x64), AMD FX-8350, ASUS M5A97 R2.0, 16GB, RME UCX, Digimax DP88, Faderport 8, Revive Audio Mod Studio Channel, Vintage Audio M72, Summit Audio TLA-50, KRK Rokit 5 G2 Monitors, Guitars "If you wait till the last minute, it only takes a minute."
|
Cactus Music
Max Output Level: 0 dBFS
- Total Posts : 8424
- Joined: 2004/02/09 21:34:04
- Status: offline
Re: Need Help With TG12345 and J37
2018/01/01 16:48:18
(permalink)
An FX Chain module is like a floating FX Bin in the ProChannel. And since there can be multiple instances of the FX Chain module, it is a very powerful and flexible feature.
Well there you go, I didn't know that, thanks for explaining this so clearly..as always I learn something new almost everyday on this forum! It will be sad when we loose it and what will be left of the Sonar community spead all over the net. I'll have to read the manual! ")
|
mrneil2
Max Output Level: -88 dBFS
- Total Posts : 126
- Joined: 2010/06/09 20:57:28
- Status: offline
Re: Need Help With TG12345 and J37
2018/01/01 22:31:40
(permalink)
Thank you everyone. I am testing now between just putting them in the fx bin and using each as an fx chain and moving them position wise in the pro channel. Lots of options.
Software:Platinum Computer: HP Envy i7-3770 CPU @ 3.40GHz , 8GB Ram, 64bit Operating System, Windows 10 Western Digital (1TB) External Hard Drive Roland Octa-Capture M-Audio Keystation 88es
|
olemon
Max Output Level: -75 dBFS
- Total Posts : 768
- Joined: 2011/10/27 05:35:19
- Status: offline
Re: Need Help With TG12345 and J37
2018/01/02 00:44:33
(permalink)
Cactus Music
...I learn something new almost everyday on this forum! It will be sad when we loose it and what will be left of the Sonar community spread all over the net. I'll have to read the manual! ")
I was thinking the same thing when I dropped by earlier:(
https://www.reverbnation.com/scottholson Platinum, Studio One 3 Pro, Win 10 (x64), AMD FX-8350, ASUS M5A97 R2.0, 16GB, RME UCX, Digimax DP88, Faderport 8, Revive Audio Mod Studio Channel, Vintage Audio M72, Summit Audio TLA-50, KRK Rokit 5 G2 Monitors, Guitars "If you wait till the last minute, it only takes a minute."
|