RexRed
Max Output Level: -81 dBFS
- Total Posts : 453
- Joined: 2011/05/20 14:09:38
- Location: Maine
- Status: offline
Moving a whole project over a few measures
What is the best way?
I have melodyne tracks and I would prefer not to render them.
|
rebel007
Max Output Level: -72 dBFS
- Total Posts : 926
- Joined: 2013/07/17 11:24:29
- Location: Victoria, Australia
- Status: offline
Re: Moving a whole project over a few measures
2018/01/03 04:07:45
(permalink)
Using the new 'Ripple Editing' feature is probably the easiest way to do this.
Place the now time line at the point you wish to move from, select the ripple editing feature, then add the number of measures you want to move or select all tracks from that point and drag them further down the timeline.
Don't forget to deselect ripple editing after you've finished as it can edit more than you want when selective editing.
Hope this helps.
Home Built Desktop Computer: Intel Core i5 750: 4Mb RAM: NVidia 210 Silent: Windows 10 32bit: Sonar Platinum: Roland OctaCapture Presario CQ41 Laptop: Intel Core i5 760: 4Mb RAM: Windows 10 32bit: Sonar Platinum (Retired) CbB on HP Pavilion Laptop 64bit: GeForce Video Card: Intel 8550: 256GB SSD 1TB Data Drive: Windows10 64bit
|
Cactus Music
Max Output Level: 0 dBFS
- Total Posts : 8424
- Joined: 2004/02/09 21:34:04
- Status: offline
Re: Moving a whole project over a few measures
2018/01/03 05:25:41
(permalink)
Set snap to WHOLE
CTRL A This in threory selects everything. Always works for me, others have complained it didn't.
Grab any track and drag the whole works back as many measures as you want. Just did this 10 minutes ago to move the count in to measure 2.
|
Kalle Rantaaho
Max Output Level: -5 dBFS
- Total Posts : 7005
- Joined: 2006/01/09 13:07:59
- Location: Finland
- Status: offline
Re: Moving a whole project over a few measures
2018/01/03 11:49:04
(permalink)
Adding a few measures in the beginning should also work.
SONAR PE 8.5.3, Asus P5B, 2,4 Ghz Dual Core, 4 Gb RAM, GF 7300, EMU 1820, Bluetube Pre - Kontakt4, Ozone, Addictive Drums, PSP Mixpack2, Melda Creative Pack, Melodyne Plugin etc. The benefit of being a middle aged amateur is the low number of years of frustration ahead of you.
|
chuckebaby
Max Output Level: 0 dBFS
- Total Posts : 13146
- Joined: 2011/01/04 14:55:28
- Status: offline
Re: Moving a whole project over a few measures
2018/01/03 13:07:37
(permalink)
I would also use the CNTL+A to select everything and drag it over a measure
Unless I had Markers. Then I would use Ripple edit (that moves Markers as well).
Windows 8.1 X64 Sonar Platinum x64 Custom built: Asrock z97 1150 - Intel I7 4790k - 16GB corsair DDR3 1600 - PNY SSD 220GBFocusrite Saffire 18I8 - Mackie Control
|
stevenpanter
Max Output Level: -84 dBFS
- Total Posts : 311
- Joined: 2004/02/15 04:47:52
- Location: Westcliff-On-Sea, Essex, UK
- Status: offline
Re: Moving a whole project over a few measures
2018/01/03 13:47:04
(permalink)
☄ Helpfulby Cactus Music 2018/01/03 16:37:39
If you navigate to the start of your project (pressing W is the easiest way to do this), you can then press Ctrl + A and from the Project menu click 'Insert Time/measures'. This will give you a dialog where you can optionally move markers, time signatures, tempo changes and can specify the number of measures you wish to insert.
Having said that though, I'm sure the Ripple Edit method as others have said would achieve the same.
Steven Panter - Musician, Composer, Producer.
Sonar Platinum Producer Edition (and all previous Sonar versions back to 3), Kontakt 11, Z3TA+ 2, BFD2, FM8, Vocaloid and others
PC: Custom-built i7-6080, 16Gb RAM, 3 * 1TB SSD, Windows 10 64-bit Korg Kronos, Minilogue, M3 Module, Triton ExtremeRoland RD700-GX, Jupiter 80, XV-5080, Fantom XR, V-Synth XT, VariOS
A collection of guitars, basses, and amps.
|
RexRed
Max Output Level: -81 dBFS
- Total Posts : 453
- Joined: 2011/05/20 14:09:38
- Location: Maine
- Status: offline
Re: Moving a whole project over a few measures
2018/01/03 14:15:58
(permalink)
I have frozen tracks from various VST synths, unfrozen melodyne tracks and a loop track with strange properties.
My loop track no matter what approach I do when i drag it parts of it "disappear". My melodyne tracks it truncates the blobs.
|
chuckebaby
Max Output Level: 0 dBFS
- Total Posts : 13146
- Joined: 2011/01/04 14:55:28
- Status: offline
Re: Moving a whole project over a few measures
2018/01/03 16:26:51
(permalink)
RexRed
I have frozen tracks from various VST synths, unfrozen melodyne tracks and a loop track with strange properties.
My loop track no matter what approach I do when i drag it parts of it "disappear". My melodyne tracks it truncates the blobs.
Bounce the Melodyne clips.
Windows 8.1 X64 Sonar Platinum x64 Custom built: Asrock z97 1150 - Intel I7 4790k - 16GB corsair DDR3 1600 - PNY SSD 220GBFocusrite Saffire 18I8 - Mackie Control
|
Cactus Music
Max Output Level: 0 dBFS
- Total Posts : 8424
- Joined: 2004/02/09 21:34:04
- Status: offline
Re: Moving a whole project over a few measures
2018/01/03 16:42:59
(permalink)
stevenpanter
If you navigate to the start of your project (pressing W is the easiest way to do this), you can then press Ctrl + A and from the Project menu click 'Insert Time/measures'. This will give you a dialog where you can optionally move markers, time signatures, tempo changes and can specify the number of measures you wish to insert.
Having said that though, I'm sure the Ripple Edit method as others have said would achieve the same.
Once again I learn a new trick from the forum. This is obviously the best way to do this and I will adopt this method. I forgot about markers but I normally will add the extra count in measure early on and only need this for downloaded files. My own creations never start at zero.
|
RexRed
Max Output Level: -81 dBFS
- Total Posts : 453
- Joined: 2011/05/20 14:09:38
- Location: Maine
- Status: offline
Re: Moving a whole project over a few measures
2018/01/03 17:53:53
(permalink)
I bounced my melodyne tracks, bounced the loop and made sure my volume envelopes were selected and ripple worked really nice.
What an odd name, (ripple) for that process.
Not sure if I unfroze one of my synths what would happen. :)
Thanks for the awesome help all!!!
|
chuckebaby
Max Output Level: 0 dBFS
- Total Posts : 13146
- Joined: 2011/01/04 14:55:28
- Status: offline
Re: Moving a whole project over a few measures
2018/01/05 11:31:37
(permalink)
RexRed
What an odd name, (ripple) for that process.
Its the ripple effect man.
Windows 8.1 X64 Sonar Platinum x64 Custom built: Asrock z97 1150 - Intel I7 4790k - 16GB corsair DDR3 1600 - PNY SSD 220GBFocusrite Saffire 18I8 - Mackie Control
|