Phoen1xPJ
Max Output Level: -85 dBFS
- Total Posts : 255
- Joined: 2016/11/03 18:14:22
- Location: Atlanta
- Status: offline
miniyo-T on iPhone control SONAR... NOT!
Anybody try miniyo-T on an iPhone to control SONAR? I have installed rtpMIDI on my Win 10 PC and created new control surface in SPlat with those MIDI ports. Won't work! Anybody have any joy?
Yours With a Song, Phoen1x Wayfarer Station Micro Studio including:*new* Cakewalk by BandLabIntel Core i5 quad core 3.10 GHzASUStek P8B75-M mobo32 GB Mushkin Blackline RAMNVidia GeForce 210 1 GB vid card(2) 1 TB HD & (1) 500 GB HD*new* Win 10 Pro 64 bitEcho Layla 24 PCI audio interface (faster than USB!)Tascam US-224 control surface (with jog/shuttle wheel, impossible to find elsewhere)MIDIMan 2X2 MIDI interface...not bleeding edge but vintage rockin' http://verticalalignment.rocks/
|
azslow3
Max Output Level: -42.5 dBFS
- Total Posts : 3297
- Joined: 2012/06/22 19:27:51
- Location: Germany
- Status: offline
Re: miniyo-T on iPhone control SONAR... NOT!
2018/03/09 16:57:51
(permalink)
Others Surface/miniyo-T are also working with Sonar.
Such formulation for compatibility with Sonar normally means that it can not work out of the box Troubleshooting: 1. Remove Control Surface (whatever you selected) from Sonar preferences. Make a project with MIDI track. Arm it. Start recording. Press transport buttons in the App. Stop recording. Do you see a MIDI clip with some notes recorded? If yes, move on. If not, check/fix rtpMIDI settings and Sonar MIDI settings till that works. 2. (assuming MIDI clip was recorded in the step (1)). Add Control Surface "Mackie control" in Sonar preferences. Pointing to correct MIDI ports. Is transport works now? If yes, fine. If no, proceed to the step 3. 3. (assuming it does not work with stock Mackie Control, so they have not implemented Mackie protocol correctly) install moded MackieControl: http://www.azslow.com/index.php/topic,341.0.htmlIn its preferences (Utilities / Mackie Control -1) set "Disable handshake". Is transport work now? If yes, fine. If no, try to change the DAW in the settings of the app (Ableton, Reaper, etc.), may be some of that will work.
Sonar 8LE -> Platinum infinity, REAPER, Windows 10 pro GA-EP35-DS3L, E7500, 4GB, GTX 1050 Ti, 2x500GB RME Babyface Pro (M-Audio Audiophile Firewire/410, VS-20), Kawai CN43, TD-11, Roland A500S, Akai MPK Mini, Keystation Pro, etc. www.azslow.com - Control Surface Integration Platform for SONAR, ReaCWP, AOSC and other accessibility tools
|
Phoen1xPJ
Max Output Level: -85 dBFS
- Total Posts : 255
- Joined: 2016/11/03 18:14:22
- Location: Atlanta
- Status: offline
Re: miniyo-T on iPhone control SONAR... NOT!
2018/03/09 18:03:07
(permalink)
azslow3 Troubleshooting: 1. Remove Control Surface (whatever you selected) from Sonar preferences. Make a project with MIDI track. Arm it. Start recording. Press transport buttons in the App. Stop recording. Do you see a MIDI clip with some notes recorded? If yes, move on. If not, check/fix rtpMIDI settings and Sonar MIDI settings till that works. 2. (assuming MIDI clip was recorded in the step (1)). Add Control Surface "Mackie control" in Sonar preferences. Pointing to correct MIDI ports. Is transport works now? If yes, fine. If no, proceed to the step 3. 3. (assuming it does not work with stock Mackie Control, so they have not implemented Mackie protocol correctly) install moded MackieControl: http://www.azslow.com/index.php/topic,341.0.html In its preferences (Utilities / Mackie Control -1) set "Disable handshake". Is transport work now? If yes, fine. If no, try to change the DAW in the settings of the app (Ableton, Reaper, etc.), may be some of that will work. I tried all of the above, no joy. I downloaded and installed the modded .dll & .ini files. I made new control surface with Mackie Control and the rtpMIDI ports. I could not find the preferences to which you refer. Where is Utilities / Mackie Control? In SONAR? I don't see it anywhere. I could not disable handshake.
Yours With a Song, Phoen1x Wayfarer Station Micro Studio including:*new* Cakewalk by BandLabIntel Core i5 quad core 3.10 GHzASUStek P8B75-M mobo32 GB Mushkin Blackline RAMNVidia GeForce 210 1 GB vid card(2) 1 TB HD & (1) 500 GB HD*new* Win 10 Pro 64 bitEcho Layla 24 PCI audio interface (faster than USB!)Tascam US-224 control surface (with jog/shuttle wheel, impossible to find elsewhere)MIDIMan 2X2 MIDI interface...not bleeding edge but vintage rockin' http://verticalalignment.rocks/
|
azslow3
Max Output Level: -42.5 dBFS
- Total Posts : 3297
- Joined: 2012/06/22 19:27:51
- Location: Germany
- Status: offline
Re: miniyo-T on iPhone control SONAR... NOT!
2018/03/09 20:01:36
(permalink)
Phoen1xPJ I tried all of the above, no joy. I downloaded and installed the modded .dll & .ini files. I made new control surface with Mackie Control and the rtpMIDI ports. I could not find the preferences to which you refer. Where is Utilities / Mackie Control? In SONAR? I don't see it anywhere. I could not disable handshake.
If you have configured Mackie Control in Control Surfaces section of Sonar (and you do not get its name in brackets, with IN/OUT removed), you should have "Utilities / Mackie Control - 1" in the Sonar menu (as last in this menu). You can also use "ACT module" in the tool bar to access the same dialog. If you have replaced original MackieControl.dll correctly, you should have "Disable handshake" in that dialog.
Sonar 8LE -> Platinum infinity, REAPER, Windows 10 pro GA-EP35-DS3L, E7500, 4GB, GTX 1050 Ti, 2x500GB RME Babyface Pro (M-Audio Audiophile Firewire/410, VS-20), Kawai CN43, TD-11, Roland A500S, Akai MPK Mini, Keystation Pro, etc. www.azslow.com - Control Surface Integration Platform for SONAR, ReaCWP, AOSC and other accessibility tools
|
Phoen1xPJ
Max Output Level: -85 dBFS
- Total Posts : 255
- Joined: 2016/11/03 18:14:22
- Location: Atlanta
- Status: offline
Re: miniyo-T on iPhone control SONAR... NOT!
2018/03/09 20:21:24
(permalink)
azslow3 If you have configured Mackie Control in Control Surfaces section of Sonar (and you do not get its name in brackets, with IN/OUT removed), you should have "Utilities / Mackie Control - 1" in the Sonar menu (as last in this menu). You can also use "ACT module" in the tool bar to access the same dialog. If you have replaced original MackieControl.dll correctly, you should have "Disable handshake" in that dialog.
I have Mackie Control in Control Surfaces... *I found it!!!* Properties in the ACT module in toolbar. It's now working for the first time! Thanks, azslow3 for pointing me in the right direction!
Yours With a Song, Phoen1x Wayfarer Station Micro Studio including:*new* Cakewalk by BandLabIntel Core i5 quad core 3.10 GHzASUStek P8B75-M mobo32 GB Mushkin Blackline RAMNVidia GeForce 210 1 GB vid card(2) 1 TB HD & (1) 500 GB HD*new* Win 10 Pro 64 bitEcho Layla 24 PCI audio interface (faster than USB!)Tascam US-224 control surface (with jog/shuttle wheel, impossible to find elsewhere)MIDIMan 2X2 MIDI interface...not bleeding edge but vintage rockin' http://verticalalignment.rocks/
|
azslow3
Max Output Level: -42.5 dBFS
- Total Posts : 3297
- Joined: 2012/06/22 19:27:51
- Location: Germany
- Status: offline
Re: miniyo-T on iPhone control SONAR... NOT!
2018/03/09 21:21:11
(permalink)
You are welcome. If it works in both direction (app updates the transport status), everything is fine. Just a note, if you use the mod (with "Disable handshake"), you will need to reinstall it every time you update/reinstall Sonar. Without monthly updates that is not a problem, but new Sonar (or whatever it is going to be called) version will overwrite the DLL.
Sonar 8LE -> Platinum infinity, REAPER, Windows 10 pro GA-EP35-DS3L, E7500, 4GB, GTX 1050 Ti, 2x500GB RME Babyface Pro (M-Audio Audiophile Firewire/410, VS-20), Kawai CN43, TD-11, Roland A500S, Akai MPK Mini, Keystation Pro, etc. www.azslow.com - Control Surface Integration Platform for SONAR, ReaCWP, AOSC and other accessibility tools
|
Phoen1xPJ
Max Output Level: -85 dBFS
- Total Posts : 255
- Joined: 2016/11/03 18:14:22
- Location: Atlanta
- Status: offline
Re: miniyo-T on iPhone control SONAR... NOT!
2018/03/09 21:34:44
(permalink)
azslow3 You are welcome. If it works in both direction (app updates the transport status), everything is fine. Just a note, if you use the mod (with "Disable handshake"), you will need to reinstall it every time you update/reinstall Sonar. Without monthly updates that is not a problem, but new Sonar (or whatever it is going to be called) version will overwrite the DLL.
Got it... already made a backup folder with the mods in it ready to copy when needed.
Yours With a Song, Phoen1x Wayfarer Station Micro Studio including:*new* Cakewalk by BandLabIntel Core i5 quad core 3.10 GHzASUStek P8B75-M mobo32 GB Mushkin Blackline RAMNVidia GeForce 210 1 GB vid card(2) 1 TB HD & (1) 500 GB HD*new* Win 10 Pro 64 bitEcho Layla 24 PCI audio interface (faster than USB!)Tascam US-224 control surface (with jog/shuttle wheel, impossible to find elsewhere)MIDIMan 2X2 MIDI interface...not bleeding edge but vintage rockin' http://verticalalignment.rocks/
|