J-War
Max Output Level: -89 dBFS
- Total Posts : 78
- Joined: 2015/04/20 08:19:15
- Status: offline
How to duplicate clip enveloppes to another clip ?
Hello there !  I am actualy recording guitar on 2 simultaneous tracks. One of the track gets the amp sound and the other track gets the unprocessed D.I sound. So i am actualy getting the exact same clips and takes on 2 different tracks (only the sound differs). I'd like to copy the clip enveloppes from the track that receives the AMP sound to the track that receives the D.I sound as the clips are exactly the same. Any idea on how to do that on sonar platinum ? Thanks in advance for your help. J.
post edited by J-War - 2018/04/02 19:38:19
|
Zargg
Max Output Level: 0 dBFS
- Total Posts : 10666
- Joined: 2014/09/28 04:20:14
- Location: Norway
- Status: offline
Re: How to copy clip enveloppes to another clip ?
2018/04/02 19:23:09
(permalink)
Hi. You should be able to do this with "copy special".
Not in front of my DAW, so not sure, but think it is Ctrl+Shift+C.
It's under the edit menu, in any case.
All the best.
Ken Nilsen ZarggBBZWin 10 Pro X64, Cakewalk by Bandlab, SPlat X64, AMD AM3+ fx-8320, 16Gb RAM, RME Ucx (+ ARC), Tascam FW 1884, M-Audio Keystation 61es, *AKAI MPK Pro 25, *Softube Console1, Alesis DM6 USB, Maschine MkII Laptop setup: Win 10 X64, i5 2.4ghz, 8gb RAM, 320gb 7200 RPM HD, Focusrite Solo, + *
|
J-War
Max Output Level: -89 dBFS
- Total Posts : 78
- Joined: 2015/04/20 08:19:15
- Status: offline
Re: How to copy clip enveloppes to another clip ?
2018/04/02 19:29:19
(permalink)
checking only the " clips automation " box in the " copy special " options is not possible unfortunately. In fact it seems you can't uncheck " Clips events " box while " clips automation " box is checked. In other words, it seems i copying " Clips events " is mandatory while copying " clips automation " !   That means it overwrites the clips on the target track, so i am stucked.
post edited by J-War - 2018/04/02 20:02:11
|
Zargg
Max Output Level: 0 dBFS
- Total Posts : 10666
- Joined: 2014/09/28 04:20:14
- Location: Norway
- Status: offline
Re: How to copy clip enveloppes to another clip ?
2018/04/02 21:15:33
(permalink)
I just did a test, and it works as expected.  Make sure you select automation only, and in (as an example) volume drop down menu. Edit: After paste. 
Ken Nilsen ZarggBBZWin 10 Pro X64, Cakewalk by Bandlab, SPlat X64, AMD AM3+ fx-8320, 16Gb RAM, RME Ucx (+ ARC), Tascam FW 1884, M-Audio Keystation 61es, *AKAI MPK Pro 25, *Softube Console1, Alesis DM6 USB, Maschine MkII Laptop setup: Win 10 X64, i5 2.4ghz, 8gb RAM, 320gb 7200 RPM HD, Focusrite Solo, + *
|
Base 57
Max Output Level: -86 dBFS
- Total Posts : 249
- Joined: 2014/12/26 16:30:14
- Status: offline
Re: How to copy clip enveloppes to another clip ?
2018/04/02 21:20:11
(permalink)
Track automation can be selected without the clip. Clip automation cannot.
|
J-War
Max Output Level: -89 dBFS
- Total Posts : 78
- Joined: 2015/04/20 08:19:15
- Status: offline
Re: How to copy clip enveloppes to another clip ?
2018/04/02 22:32:53
(permalink)
Thanks for your help Zargg, unfortunately i was talking about duplicating Clip automation, not track ! @Base 57 ok thanks ! That sucks but well...
|
Anderton
Max Output Level: 0 dBFS
- Total Posts : 14070
- Joined: 2003/11/06 14:02:03
- Status: offline
Re: How to copy clip enveloppes to another clip ?
2018/04/03 05:42:49
(permalink)
Yeah, I'm afraid that clip automation becomes part of the clip, it's not just overlaid on it like track automation.
|
Zargg
Max Output Level: 0 dBFS
- Total Posts : 10666
- Joined: 2014/09/28 04:20:14
- Location: Norway
- Status: offline
Re: How to copy clip enveloppes to another clip ?
2018/04/03 08:11:51
(permalink)
I should learn to read a little slower.
After reading "2 tracks", I didn't notice the clip envelope part..
Ken Nilsen ZarggBBZWin 10 Pro X64, Cakewalk by Bandlab, SPlat X64, AMD AM3+ fx-8320, 16Gb RAM, RME Ucx (+ ARC), Tascam FW 1884, M-Audio Keystation 61es, *AKAI MPK Pro 25, *Softube Console1, Alesis DM6 USB, Maschine MkII Laptop setup: Win 10 X64, i5 2.4ghz, 8gb RAM, 320gb 7200 RPM HD, Focusrite Solo, + *
|
J-War
Max Output Level: -89 dBFS
- Total Posts : 78
- Joined: 2015/04/20 08:19:15
- Status: offline
Re: How to copy clip enveloppes to another clip ?
2018/04/03 11:19:10
(permalink)
Recording a " clone D.I track " for reamping purposes has become quite common nowadays ! Allowing the copy of clip enveloppes from the processed track to the D.I track would save a lot of time... Especialy when you have a lot of takes ! I wonder if there are other DAW allowing that.
|
Zargg
Max Output Level: 0 dBFS
- Total Posts : 10666
- Joined: 2014/09/28 04:20:14
- Location: Norway
- Status: offline
Re: How to copy clip enveloppes to another clip ?
2018/04/03 11:26:20
(permalink)
I know Done it several times myself. Just a thought. If you collapse the take lanes, and copy the automation from the "main track view", would that work?
Ken Nilsen ZarggBBZWin 10 Pro X64, Cakewalk by Bandlab, SPlat X64, AMD AM3+ fx-8320, 16Gb RAM, RME Ucx (+ ARC), Tascam FW 1884, M-Audio Keystation 61es, *AKAI MPK Pro 25, *Softube Console1, Alesis DM6 USB, Maschine MkII Laptop setup: Win 10 X64, i5 2.4ghz, 8gb RAM, 320gb 7200 RPM HD, Focusrite Solo, + *
|
J-War
Max Output Level: -89 dBFS
- Total Posts : 78
- Joined: 2015/04/20 08:19:15
- Status: offline
Re: How to copy clip enveloppes to another clip ?
2018/04/03 11:43:53
(permalink)
It seems you can't copy the clips automation without copying the events as well.
|