RevBob
Max Output Level: -89 dBFS
- Total Posts : 83
- Joined: 2011/03/05 13:33:24
- Status: offline
Command Center and installation
Hey there - I am doing a clean install with new hard drives and trying to figure out how to custom install paths.
I searched the forums and there's reference to Verbose Mode, however I can't seem to find how to access verbose mode.
Can someone dumb this down for me as I am fried and getting no where...
1) Where is "Verbose Mode" so I can custom paths for instal?
2) If I use the command center to do updates will it find these custom paths?
Thank you
Rain Computers Ion Studio Custom PC Xeon 8-core 3.1ghz processor, Win7 Pro 64x, 24gb RAM, ATI Radeon HD 5450, Sonar X2 Producer Expanded 64x, NI Komplete, Kore 2, Maschine, SoundminerHD, Adobe Premier and Audition, MOTU 828mk3, M-Audio Axiom, Event20/20 Monitors
|
Midiboy
Max Output Level: -82 dBFS
- Total Posts : 414
- Joined: 2015/01/14 09:29:54
- Location: Northwood
- Status: offline
Re: Command Center and installation
2018/04/11 17:09:59
(permalink)
In command center, under the settings, you can change all the paths. That's the only way I know how to do it.
---- Gregg Midiboy Music www.facebook.com/midiboygregg Win10x64 (Eng), Sonar Platinum x64 (Eng w/ lifetime updates), 32GB DDR4 RAM, Intel i7 5820, nVidia 960, Alesis MultiMix 8 USB2 w/ Alesis MultiMix driver. Native Instruments Komplete Kontrol S88, Korg NanoControl.
|
Songroom
Max Output Level: -87 dBFS
- Total Posts : 174
- Joined: 2013/09/19 02:18:32
- Location: UK
- Status: offline
Re: Command Center and installation
2018/04/11 17:15:33
(permalink)
Hi,
As above. Click the 'cog' icon at the top right of the Command Center window to open the settings panel then open the 'Paths' tab and change the 'Download Path' and 'Content Path' settings as required.
These will become the default paths for additional downloads.
Sonar Platinum - BandLab Cakewalk - Presonus 16.0.2 - Tannoys - Lava BandLamp ?
|
scook
Forum Host
- Total Posts : 24146
- Joined: 2005/07/27 13:43:57
- Location: TX
- Status: offline
Re: Command Center and installation
2018/04/11 17:28:35
(permalink)
Songroom
These will become the default paths for additional downloads.
Until the session is reset. Logging out and back into the Command Center resets the program back to its defaults. This is why I prefer directory junctions. The remain the until I change them.
|
Studioguy1
Max Output Level: -86 dBFS
- Total Posts : 244
- Joined: 2006/10/04 23:20:33
- Location: The Lehigh Valley
- Status: offline
Re: Command Center and installation
2018/04/11 17:47:45
(permalink)
But then, Command Center never did work for some of us, so we did it the old fashioned way and went to the site.
Current happy user of Cakewalk by BandLab; Former Sonar Platinum lifetime plan; Okie Duke, The Duke Of The Lehigh Valley Sound Syndicate Studios-Recording and Production HP Pavilion dv7 Notebook PC 8 Gb ram Windows 7 Premium (x64) Service Pack 1 2.20 gigahertz Intel Core i7-2670QM Hitachi [Hard drive] (750.16 GB) - 2 Tb external Drive - U-Phoria UMC204HD usb - Triton Keyboard - and much more. Blue Clown Records Ltd Blue Clown Publishing BMI Okie Duke Promotions Ltd
|
RevBob
Max Output Level: -89 dBFS
- Total Posts : 83
- Joined: 2011/03/05 13:33:24
- Status: offline
Re: Command Center and installation
2018/04/11 18:08:12
(permalink)
I'm talking about install paths for the software itself, audio files, etc...
Like installing Sonar on a D drive, a separate drive for audio and one for lops/instruments?
THe settings are very limited on the command center and when I was googling this I kep finding mention of "verbose mode" but no description of how to access those options.
Is it just on manual install?
And if so, does that mean I can't use the command center for updates?
Rain Computers Ion Studio Custom PC Xeon 8-core 3.1ghz processor, Win7 Pro 64x, 24gb RAM, ATI Radeon HD 5450, Sonar X2 Producer Expanded 64x, NI Komplete, Kore 2, Maschine, SoundminerHD, Adobe Premier and Audition, MOTU 828mk3, M-Audio Axiom, Event20/20 Monitors
|
RevBob
Max Output Level: -89 dBFS
- Total Posts : 83
- Joined: 2011/03/05 13:33:24
- Status: offline
Re: Command Center and installation
2018/04/11 18:24:49
(permalink)
Here's an example:
I downloaded and trying to install from Setup.
I get the prompt for Content (audio, midi loops, templates) and it gives me only one option.
What if I store all my midi loops somewhere else other than my audio drive?
Which is what I have always done - where's the options for this on install?
Rain Computers Ion Studio Custom PC Xeon 8-core 3.1ghz processor, Win7 Pro 64x, 24gb RAM, ATI Radeon HD 5450, Sonar X2 Producer Expanded 64x, NI Komplete, Kore 2, Maschine, SoundminerHD, Adobe Premier and Audition, MOTU 828mk3, M-Audio Axiom, Event20/20 Monitors
|
scook
Forum Host
- Total Posts : 24146
- Joined: 2005/07/27 13:43:57
- Location: TX
- Status: offline
Re: Command Center and installation
2018/04/11 18:31:59
(permalink)
RevBob
THe settings are very limited on the command center and when I was googling this I kep finding mention of "verbose mode" but no description of how to access those options.
Verbose mode displays the sames prompts as running the installers from the command line. RevBob
Here's an example:
I downloaded and trying to install from Setup.
I get the prompt for Content (audio, midi loops, templates) and it gives me only one option.
What if I store all my midi loops somewhere else other than my audio drive?
Which is what I have always done - where's the options for this on install?
The installers treat all content the same. If you don't, it is up to you to handle it after install or set up directory junctions in advance.
|