AdamGrossmanLG
Max Output Level: -62 dBFS
- Total Posts : 1436
- Joined: 2014/07/13 03:40:34
- Status: offline
|
Kev999
Max Output Level: -36 dBFS
- Total Posts : 3922
- Joined: 2007/05/01 14:22:54
- Location: Victoria, Australia
- Status: offline
Re: Why Did Bandlab Remove Synth Automation Lanes?
2018/10/31 20:23:43
(permalink)
SonarPlatinum∞(22.11.0.111)|Mixbus32C(4.3.19)|DigitalPerformer(9.5.1)|Reaper(5.77)FractalDesign:DefineR5|i7-6850k@4.1GHz|16GB@2666MHz-DDR4|MSI:GamingProCarbonX99a|Matrox:M9148(x2)|UAD2solo(6.5.2)|W7Ult-x64-SP1
Audient:iD22+ASP800|KRK:VXT6|+various-outboard-gear|+guitars&basses, etc.
Having fun at work lately
|
Keni
Max Output Level: -17.5 dBFS
- Total Posts : 5769
- Joined: 2003/11/04 10:42:15
- Location: Willits, CA USA
- Status: offline
Re: Why Did Bandlab Remove Synth Automation Lanes?
2018/10/31 23:40:24
(permalink)
Maybe from the audio track?
|
Keni
Max Output Level: -17.5 dBFS
- Total Posts : 5769
- Joined: 2003/11/04 10:42:15
- Location: Willits, CA USA
- Status: offline
Re: Why Did Bandlab Remove Synth Automation Lanes?
2018/11/01 01:27:32
(permalink)
I just looked at my setup...
I did some midi automation recently and didn't remember it being a problem...
If i start a new project and add a synth, i see i have the display available/assignable controls checked as well as ask everytime.
Insering rwpture and minimoog v (old arturia) then checking the automation lane dropdown and both of the synths are available...
|
Kev999
Max Output Level: -36 dBFS
- Total Posts : 3922
- Joined: 2007/05/01 14:22:54
- Location: Victoria, Australia
- Status: offline
Re: Why Did Bandlab Remove Synth Automation Lanes?
2018/11/01 01:39:21
(permalink)
Keni
...I did some midi automation recently and didn't remember it being a problem...
If i start a new project and add a synth, i see i have the display available/assignable controls checked as well as ask everytime....
Me too, usually. That's the way it normally works. However, you can set a different track for a given synth's automation if you wish. And sometimes you find that, inexplicably, the the wrong track has been set for a synth's automation. But you can easily correct this in the Synth Rack.
SonarPlatinum∞(22.11.0.111)|Mixbus32C(4.3.19)|DigitalPerformer(9.5.1)|Reaper(5.77)FractalDesign:DefineR5|i7-6850k@4.1GHz|16GB@2666MHz-DDR4|MSI:GamingProCarbonX99a|Matrox:M9148(x2)|UAD2solo(6.5.2)|W7Ult-x64-SP1
Audient:iD22+ASP800|KRK:VXT6|+various-outboard-gear|+guitars&basses, etc.
Having fun at work lately
|
Keni
Max Output Level: -17.5 dBFS
- Total Posts : 5769
- Joined: 2003/11/04 10:42:15
- Location: Willits, CA USA
- Status: offline
Re: Why Did Bandlab Remove Synth Automation Lanes?
2018/11/01 02:52:51
(permalink)
Kev999
Keni
...I did some midi automation recently and didn't remember it being a problem...
If i start a new project and add a synth, i see i have the display available/assignable controls checked as well as ask everytime....
Me too, usually. That's the way it normally works. However, you can set a different track for a given synth's automation if you wish. And sometimes you find that, inexplicably, the the wrong track has been set for a synth's automation. But you can easily correct this in the Synth Rack.
I haven't run across that...
|
Kev999
Max Output Level: -36 dBFS
- Total Posts : 3922
- Joined: 2007/05/01 14:22:54
- Location: Victoria, Australia
- Status: offline
Re: Why Did Bandlab Remove Synth Automation Lanes?
2018/11/01 03:41:17
(permalink)
Potentially you could put all your synth's automation together on one track. This may make it more convenient to deal with or on the other hand it may be more confusing. Maybe I will try it sometime.
SonarPlatinum∞(22.11.0.111)|Mixbus32C(4.3.19)|DigitalPerformer(9.5.1)|Reaper(5.77)FractalDesign:DefineR5|i7-6850k@4.1GHz|16GB@2666MHz-DDR4|MSI:GamingProCarbonX99a|Matrox:M9148(x2)|UAD2solo(6.5.2)|W7Ult-x64-SP1
Audient:iD22+ASP800|KRK:VXT6|+various-outboard-gear|+guitars&basses, etc.
Having fun at work lately
|
Keni
Max Output Level: -17.5 dBFS
- Total Posts : 5769
- Joined: 2003/11/04 10:42:15
- Location: Willits, CA USA
- Status: offline
Re: Why Did Bandlab Remove Synth Automation Lanes?
2018/11/01 03:54:32
(permalink)
Yes... i see on an orphan midi teack options to add cc's and if they are midi-channel discrete they could route to many places...
Not for me...
I like my controls discrete to the midi track containing all data for one synth. A sngke controller track for all would be daunting for me.
I'm wondering why the OP isn't having this stay functional. Even with the appropriate checkmarked options to do so...?
|
Kev999
Max Output Level: -36 dBFS
- Total Posts : 3922
- Joined: 2007/05/01 14:22:54
- Location: Victoria, Australia
- Status: offline
Re: Why Did Bandlab Remove Synth Automation Lanes?
2018/11/01 04:36:12
(permalink)
Keni
...I'm wondering why the OP isn't having this stay functional. Even with the appropriate checkmarked options to do so...?
I don't know, but the same thing happened to me too a couple of years ago with Sonar X3.
SonarPlatinum∞(22.11.0.111)|Mixbus32C(4.3.19)|DigitalPerformer(9.5.1)|Reaper(5.77)FractalDesign:DefineR5|i7-6850k@4.1GHz|16GB@2666MHz-DDR4|MSI:GamingProCarbonX99a|Matrox:M9148(x2)|UAD2solo(6.5.2)|W7Ult-x64-SP1
Audient:iD22+ASP800|KRK:VXT6|+various-outboard-gear|+guitars&basses, etc.
Having fun at work lately
|
Skyline_UK
Max Output Level: -54 dBFS
- Total Posts : 2133
- Joined: 2004/04/15 17:55:09
- Location: Midlands, UK
- Status: offline
Re: Why Did Bandlab Remove Synth Automation Lanes?
2018/11/01 15:12:33
(permalink)
My stuff Intel Sandy Bridge i7 2600 @ 3.4GHz, 4 cores, 8 threads, 16GB RAM.OS & Programs drive: 240GB SSD
Data drives: 1 x 1TB drive RAID mirrored, plus extra 1TB data drive
Windows 10 Home 64 bit
Cakewalk by BandLab 64 bit, Studio One 3, Band In A Box 2016, Ozone 8+ too many other pluginsBandLab page
|