gallaman
Max Output Level: -90 dBFS
- Total Posts : 3
- Joined: 2016/04/24 12:56:02
- Status: offline
How to determine which tracks output to a bus
In Sonar Professional, is it possible to list the tracks which output to a given bus? I have a project with 32 tracks and it's time consuming to look through every track's output. I have a bus I want certain vocal tracks to output to, and for that bus to output to a Master bus, and I want to make sure ONLY those tracks go to that bus. Thanks!
AMD FX-8350 8-core 4GHz PC Basement Studio
|
scook
Forum Host
- Total Posts : 24146
- Joined: 2005/07/27 13:43:57
- Location: TX
- Status: offline
Re: How to determine which tracks output to a bus
2018/12/05 21:52:29
(permalink)
☄ Helpfulby seriousfun 2018/12/09 17:49:44
Use bus colors by default tracks inherit the color of the bus in the track's output.
|
promidi
Max Output Level: -66 dBFS
- Total Posts : 1220
- Joined: 2014/11/21 18:46:39
- Location: South Australia
- Status: offline
Re: How to determine which tracks output to a bus
2018/12/05 22:16:08
(permalink)
☄ Helpfulby Jesse G 2018/12/09 04:56:26
You can also hold down ALT while selecting a bus. This will also highlight all tracks routed to that bus.
Windows 10 64bit fully patched, 16 gig ram . PCR-800 Controller. (Working in Win 10 1809 64bit)CPU: i5 4670. Video: Nvidia GTX560ti (latest drivers). Audio IF: Focusrite 2i2 2nd Gen
Internet always on.
Software: Cakewalk by Bandlab (2018.09 B29)
ASIO mode. 24bit 48khz 256 samples Rapture Pro, AAS GS2, VS-3, EP-4, VA-2, Chromophone 2, Z3TA+ 2, Addictive drums 2, Addictive Keys, Mpowersynth (latest), Iris 2, GPO5, Sampletank 3,
|
Kev999
Max Output Level: -36 dBFS
- Total Posts : 3922
- Joined: 2007/05/01 14:22:54
- Location: Victoria, Australia
- Status: offline
Re: How to determine which tracks output to a bus
2018/12/05 22:43:16
(permalink)
promidi
You can also hold down ALT while selecting a bus. This will also highlight all tracks routed to that bus.
That's useful, but it usually requires a bit of scrolling to see all the tracks. I would prefer to see a list. I submitted this feature request a while ago: http://forum.cakewalk.com/m3307566.aspx
SonarPlatinum∞(22.11.0.111)|Mixbus32C(4.3.19)|DigitalPerformer(9.5.1)|Reaper(5.77)FractalDesign:DefineR5|i7-6850k@4.1GHz|16GB@2666MHz-DDR4|MSI:GamingProCarbonX99a|Matrox:M9148(x2)|UAD2solo(6.5.2)|W7Ult-x64-SP1
Audient:iD22+ASP800|KRK:VXT6|+various-outboard-gear|+guitars&basses, etc.
Having fun at work lately
|
paulo
Max Output Level: -13 dBFS
- Total Posts : 6218
- Joined: 2007/01/30 05:06:57
- Status: offline
Re: How to determine which tracks output to a bus
2018/12/05 23:36:14
(permalink)
|
retired_account
Max Output Level: -85 dBFS
- Total Posts : 262
- Joined: 2009/12/13 11:58:48
- Status: offline
Re: How to determine which tracks output to a bus
2018/12/06 15:40:12
(permalink)
I use different folders for sections, click it & all the tracks in it are selected. Then hold Ctrl, select the bus, send, group, or out & all those tracks will directed to the same all at once.
Not a list but you can change & double check quickly, 32 tracks of grouped sections in folders shouldn't take much time at all.
|
Jesse G
Max Output Level: -32.5 dBFS
- Total Posts : 4282
- Joined: 2004/04/14 01:43:43
- Status: offline
Re: How to determine which tracks output to a bus
2018/12/06 16:11:25
(permalink)
promidi
You can also hold down ALT while selecting a bus. This will also highlight all tracks routed to that bus.
Very good suggestion Promidi. I never knew that before about identifying the tracks routed to, or having sends assigned to buses. Great Answer!!
Peace,Jesse G.  A fisher of men <>< ==============================Cakewalk and I are going places together!
Cakewalk By Bandlab, Windows 10 Pro- 64 bit, Gigabyte GA-Z97X-SLI, Intel Core i5-4460 Haswell Processor, Crucial Ballistix 32 GB Ram, PNY GeForce GTX 750, Roland Octa-Capture, Mackie Big Knob, Mackie Universal Controller (MCU), KRK V4's, KRK Rockit 6, Korg TR-61 Workstation, M-Audio Code 49 MIDI keyboard controller.[/
|
Rbh
Max Output Level: -52 dBFS
- Total Posts : 2349
- Joined: 2007/09/05 22:33:44
- Location: Indiana
- Status: offline
Re: How to determine which tracks output to a bus
2018/12/08 06:54:33
(permalink)
Jesse G
promidi
You can also hold down ALT while selecting a bus. This will also highlight all tracks routed to that bus.
Very good suggestion Promidi. I never knew that before about identifying the tracks routed to, or having sends assigned to buses.
Great Answer!!
I second this ^ great tip!
|