Sparkeast
Max Output Level: -90 dBFS
- Total Posts : 3
- Joined: 2005/08/12 07:17:53
- Status: offline
Need Processor/MoBO recommendation
Hi gang! New kid on the block here. I'm running Sonar PE 4.03 on an Averatec 6130 laptop. I bought it because it has a P3.0 processor. But I'm struggling to get quality performance when running plug-ins. I believe that there are issues with the on-board video. But, I digress...... I'm going back to a desktop! I'm considering building it to optimize for audio. I need your expert recommendations for a good Sonar-friendly motherboard/processor. I'm not real interested in 64 bit or dual processors. I'd like be able to run Sonar, Sampletank II, Groove agent, Z3Ta, and assorted other soft synths as well as processors without any glitches. Thanks for all advice! Sparky
|
tor
Max Output Level: -73 dBFS
- Total Posts : 852
- Joined: 2003/11/06 23:32:59
- Location: Norway
- Status: offline
RE: Need Processor/MoBO recommendation
2005/08/12 08:56:08
(permalink)
|
Steve_Karl
Max Output Level: -50 dBFS
- Total Posts : 2534
- Joined: 2003/11/06 20:53:26
- Location: Pittsburgh, PA USA
- Status: offline
RE: Need Processor/MoBO recommendation
2005/08/12 11:16:54
(permalink)
A64 939 4000+ with an L2 cache of 1 mb on an MSI Neo-Platinum 2. If you want performance for softsynths and plugins then 64bit is the way, especially with the 1mb L2. Steve
post edited by Steve_Karl - 2005/08/12 11:21:56
|
JonD
Max Output Level: -39 dBFS
- Total Posts : 3617
- Joined: 2003/12/09 11:09:10
- Location: East of Santa Monica
- Status: offline
RE: Need Processor/MoBO recommendation
2005/08/12 13:06:08
(permalink)
ORIGINAL: Steve_Karl A64 939 4000+ with an L2 cache of 1 mb on an MSI Neo-Platinum 2. If you want performance for softsynths and plugins then 64bit is the way, especially with the 1mb L2. Steve Seconded (Though I got the Gigabyte Ultra K8NS- Ultra 939 Board) With ram prices low now, I'd go with 2GB. In fact, I recently built a new machine, and had a strict budget to work with, so went with 2GB of ram over the 1MB L2 cache (I think the extra ram will give more of a quantifiable boost in performance, than the L2). Still, in 6mos or a year, I expect to upgrade to a dual-core (1 MB L2 cache) chip, which is the beauty of the 64 bit 939 systems - very upgradeable with just a chip swap. JD
post edited by JonD - 2005/08/12 21:11:03
|
jcschild
Max Output Level: -41 dBFS
- Total Posts : 3409
- Joined: 2003/11/08 00:20:10
- Location: Kentucky y'all
- Status: offline
RE: Need Processor/MoBO recommendation
2005/08/12 13:12:12
(permalink)
HI, another vote for a Nforce 3 or Via KT 800 chipset mobo with a 939 AMD! Scott ADK
|
ashrambler
Max Output Level: -86 dBFS
- Total Posts : 247
- Joined: 2004/05/14 22:33:03
- Location: Dooder, NC
- Status: offline
RE: Need Processor/MoBO recommendation
2005/08/12 13:21:27
(permalink)
Just built this NForce 3....very stable. Good Luck! Gigabyte GA-K8NS Ultra-939 NForce 3 Ultra (bios F8 w/latest NVidia drivers) Athlon 64 3500 2 gigs of Corsair Value Select DDR 3200 (Dual Channel mode) NVidia 5200 AGP 8x video (256 megs w/latest NVidia drivers) Dell 1800FP (digital LCD monitor) (1) 120 gig Seagate Barracuda 7200rpm (2) 160 gig Seagate Barracuda's 7200rpm (EIDE for all drives, no SATA) WinXP SP2 (w/ latest patches) Emu 1820m soundcard ESI Juli@ Ultra 500 watt Case Plextor 708a internal DVD-RW/CDRW
post edited by ashrambler - 2005/08/13 09:40:41
|
Sparkeast
Max Output Level: -90 dBFS
- Total Posts : 3
- Joined: 2005/08/12 07:17:53
- Status: offline
RE: Need Processor/MoBO recommendation
2005/08/13 08:38:15
(permalink)
What apps are you running? I assume that you are running Sonar. Which version? Also, what plugins do you run? What is latency for realtime play of softsynths? Thanks, Sparky
|
ashrambler
Max Output Level: -86 dBFS
- Total Posts : 247
- Joined: 2004/05/14 22:33:03
- Location: Dooder, NC
- Status: offline
RE: Need Processor/MoBO recommendation
2005/08/13 09:32:49
(permalink)
I'm running Sonar 4 and with Spectrasonics plugins at 7ms with the EMU and 2ms with the Juli@. It's a very robust setup for softsynths.
|
Steve_Karl
Max Output Level: -50 dBFS
- Total Posts : 2534
- Joined: 2003/11/06 20:53:26
- Location: Pittsburgh, PA USA
- Status: offline
RE: Need Processor/MoBO recommendation
2005/08/13 09:57:49
(permalink)
Sonar 4.02 EWQLSOGold. 4 fully loaded instances with medium sized instruments. 1.5 on the latency. WDM drivers. No frozen synths yet. The 5th instance of Gold or StormDrum will force the latency to be moved up to 2.9. Steve
|
reset
Max Output Level: -87 dBFS
- Total Posts : 184
- Joined: 2004/12/17 21:27:05
- Status: offline
RE: Need Processor/MoBO recommendation
2005/08/14 23:14:41
(permalink)
Lots of info regarding building a DAW with an MSI K8N Neo2 Platinum nForce3 motherboard in THIS THREAD.
|