Setting the PLAYBACK TEMPO

Author
Post
Essentials Only Full Version
mencog
Max Output Level: -90 dBFS
  • Total Posts : 10
  • Joined: 2007/02/13 21:25:54
  • Status: offline
2007/02/13 22:04:04 (permalink)

Setting the PLAYBACK TEMPO

I'm new to guitar tracks pro and I'm having some trouble with playback. After I make a recording, it plays back twice as fast as the tempo at which I recorded it. So a recording of 8 measures comes down to 4. It is much faster than how I recorded it. Although this is a good feature, how can I record in real time? Or reduce the playback tempo of the recorded track?

Thanks!

#1

5 Replies Related Threads
    RobertB
    Max Output Level: 0 dBFS
    • Total Posts : 11256
    • Joined: 2005/11/19 23:40:50
    • Location: Fort Worth, Texas
    • Status: offline
    RE: Setting the PLAYBACK TEMPO 2007/02/13 22:36:22 (permalink)
    Are you using a USB mic? This is a classic symptom. If so, change your driver mode to MME. You will get some latency, but you don't have a lot of options.
    Tell us about what kind of hardware you are working with. We may have some ideas that will help.

    My Soundclick Page
    SONAR Professional, X3eStudio,W7 64bit, AMD Athlon IIx4 2.8Ghz, 4GB RAM, 64bit, AKAI EIE Pro, Nektar Impact LX61,Alesis DM6,Alesis ControlPad,Yamaha MG10/2,Alesis M1Mk2 monitors,Samson Servo300,assorted guitars,Lava Lamp

    Shimozu-Kushiari or Bob
    #2
    mencog
    Max Output Level: -90 dBFS
    • Total Posts : 10
    • Joined: 2007/02/13 21:25:54
    • Status: offline
    RE: Setting the PLAYBACK TEMPO 2007/02/13 22:56:15 (permalink)
    I'm using a Lightsnake cable (1/4) - the recording is fine and I can get the effects and everything to work fine

    That's about it for hardware
    #3
    RobertB
    Max Output Level: 0 dBFS
    • Total Posts : 11256
    • Joined: 2005/11/19 23:40:50
    • Location: Fort Worth, Texas
    • Status: offline
    RE: Setting the PLAYBACK TEMPO 2007/02/13 23:05:26 (permalink)
    OK. Pretty much the same scenario. You have the 1/4" in from the guitar, but it plugs into the USB port, right?
    There seems to be something in the interface that kind of freaks out with the signal timing.
    It lays the data into the file at twice the rate you think you are recording at.
    Try changing your driver mode(Options>Audio) to MME. Restart the program. You may need to run the wave profiler again.
    Let me know if that helps.

    My Soundclick Page
    SONAR Professional, X3eStudio,W7 64bit, AMD Athlon IIx4 2.8Ghz, 4GB RAM, 64bit, AKAI EIE Pro, Nektar Impact LX61,Alesis DM6,Alesis ControlPad,Yamaha MG10/2,Alesis M1Mk2 monitors,Samson Servo300,assorted guitars,Lava Lamp

    Shimozu-Kushiari or Bob
    #4
    mencog
    Max Output Level: -90 dBFS
    • Total Posts : 10
    • Joined: 2007/02/13 21:25:54
    • Status: offline
    RE: Setting the PLAYBACK TEMPO 2007/02/13 23:07:34 (permalink)
    That worked! Thanks so much - I've been frustrated over this thing for hours.

    #5
    RobertB
    Max Output Level: 0 dBFS
    • Total Posts : 11256
    • Joined: 2005/11/19 23:40:50
    • Location: Fort Worth, Texas
    • Status: offline
    RE: Setting the PLAYBACK TEMPO 2007/02/13 23:09:10 (permalink)
    Good deal. Rock on!

    My Soundclick Page
    SONAR Professional, X3eStudio,W7 64bit, AMD Athlon IIx4 2.8Ghz, 4GB RAM, 64bit, AKAI EIE Pro, Nektar Impact LX61,Alesis DM6,Alesis ControlPad,Yamaha MG10/2,Alesis M1Mk2 monitors,Samson Servo300,assorted guitars,Lava Lamp

    Shimozu-Kushiari or Bob
    #6
    Jump to:
    © 2024 APG vNext Commercial Version 5.1