GT3 PRO

Author
Post
Essentials Only Full Version
Old Rocker
Max Output Level: -90 dBFS
  • Total Posts : 5
  • Joined: 2006/02/19 05:51:21
  • Status: offline
2008/04/29 12:15:23 (permalink)

GT3 PRO

Hi All
I've had to re load GT3 on my PC (windows xp) but am having trouble getting the re 'R' to light up when I try to record. When I did get it to light up GT3 would not register a signal for recording. (no blue light pulsing on the screen) I know the signal is good as getting a reponse on my mixer and alesis io2 interface. All was working normally just a couple of weeks ago and I'm guessing it's something to do with the Audio tab on GT3 and the settings. Options are Realteck AC97 (my PC card) and USB Device (my IO2 interface)
Sounds are coming thru my computer speakers as normal and I have a couple of Edirol Speakers plugged into my IO2 interface. Have tried many combinations on the GT3 Audio tab and it's showing WDM/KS on driver mode. On the Driver screen 'Input' and 'Output' are populated with Realtek AC97 and USB Device and are all 'greyed' out. Any help would be appreciated thanks. John / West Sussex UK
#1

10 Replies Related Threads
    Randy P
    Max Output Level: -44.5 dBFS
    • Total Posts : 3070
    • Joined: 2006/11/17 11:02:45
    • Location: smokin with the boys upstairs....
    • Status: offline
    RE: GT3 PRO 2008/04/29 12:50:20 (permalink)
    Disable the realtek. You no longer need it with your interface. Set the Alesis for your input/output. That should do it.

    Randy
    p.s. Let us know if that works.

    http://www.soundclick.com/riprorenband

    The music biz is a cruel and shallow money trench,a plastic hallway where thieves & pimps run free and good men die like dogs. There's also a negative side. Hunter S. Thompson
    #2
    SteveStrummerUK
    Max Output Level: 0 dBFS
    • Total Posts : 31112
    • Joined: 2006/10/28 10:53:48
    • Location: Worcester, England.
    • Status: offline
    RE: GT3 PRO 2008/04/29 14:01:39 (permalink)

    Hi John

    Randy's right on the money here - if you go to the Advanced tab in GT3's Audio Options you should also be able to select the device drivers GT should work with:



    If GT is set to 'Use Default' it will probably be trying to access the Realtek drivers, setting this option to ASIO should direct GT to access the ASIO 2.0 drivers your Alesis uses.

    Steve

     Music:     The Coffee House Band | VeRy MeTaL

    #3
    SteveStrummerUK
    Max Output Level: 0 dBFS
    • Total Posts : 31112
    • Joined: 2006/10/28 10:53:48
    • Location: Worcester, England.
    • Status: offline
    RE: GT3 PRO 2008/05/12 15:00:49 (permalink)

    Bump - anyone else got any ideas?

     Music:     The Coffee House Band | VeRy MeTaL

    #4
    SteveStrummerUK
    Max Output Level: 0 dBFS
    • Total Posts : 31112
    • Joined: 2006/10/28 10:53:48
    • Location: Worcester, England.
    • Status: offline
    Can anyone else help? 2008/05/13 21:32:02 (permalink)

    ORIGINAL: SteveStrummerUK


    Bump - anyone else got any ideas?


     Music:     The Coffee House Band | VeRy MeTaL

    #5
    RobertB
    Max Output Level: 0 dBFS
    • Total Posts : 11256
    • Joined: 2005/11/19 23:40:50
    • Location: Fort Worth, Texas
    • Status: offline
    RE: Can anyone else help? 2008/05/13 21:55:03 (permalink)
    OR,
    I got a Windows update, last Friday I think, that disrupted my E-MU0404. All the meters registered, just no sound.
    I did a System Restore to just before that loaded, and all was normal again. If you allow automatic updates, chack that out.

    My Soundclick Page
    SONAR Professional, X3eStudio,W7 64bit, AMD Athlon IIx4 2.8Ghz, 4GB RAM, 64bit, AKAI EIE Pro, Nektar Impact LX61,Alesis DM6,Alesis ControlPad,Yamaha MG10/2,Alesis M1Mk2 monitors,Samson Servo300,assorted guitars,Lava Lamp

    Shimozu-Kushiari or Bob
    #6
    Doc_Hollingsworth
    Max Output Level: -52.5 dBFS
    • Total Posts : 2289
    • Joined: 2008/03/02 22:25:01
    • Location: Boise, Idaho
    • Status: offline
    RE: Can anyone else help? 2008/05/14 11:57:17 (permalink)
    Windows Update bad! very bad! I review all the updates before applying them. A bit more work but more predictable in results.

    Doc
    MacBook Pro 15.4 Retina (mid 2015)
    Focusrite Clarett 8PreX & OctoPre
    Logic Pro X 10.2.4/Reason 9.2/Pro Tools 12.7
    Long haired dachshund - requisite studio dog (no short hairs need apply - read the sign)
     
    #7
    pistolpete
    Max Output Level: -59.5 dBFS
    • Total Posts : 1584
    • Joined: 2007/02/08 18:03:18
    • Location: Brentwood, TN
    • Status: offline
    RE: Can anyone else help? 2008/05/14 19:32:12 (permalink)
    Disable the USB and use the Realtek.....

    RobertB must be using Vista .....
    #8
    SteveStrummerUK
    Max Output Level: 0 dBFS
    • Total Posts : 31112
    • Joined: 2006/10/28 10:53:48
    • Location: Worcester, England.
    • Status: offline
    RE: Can anyone else help? 2008/05/14 19:36:27 (permalink)

    ORIGINAL: pistolpete

    Disable the USB and use the Realtek.....

    RobertB must be using Vista .....



    Why?

    My XP PC still gets updates.

     Music:     The Coffee House Band | VeRy MeTaL

    #9
    pistolpete
    Max Output Level: -59.5 dBFS
    • Total Posts : 1584
    • Joined: 2007/02/08 18:03:18
    • Location: Brentwood, TN
    • Status: offline
    RE: Can anyone else help? 2008/05/14 19:37:43 (permalink)

    ORIGINAL: SteveStrummerUK


    ORIGINAL: pistolpete

    Disable the USB and use the Realtek.....

    RobertB must be using Vista .....



    Why?

    My XP PC still gets updates.


    Oh yeah, SP3.... reboot,reboot,reboot ....
    #10
    SteveStrummerUK
    Max Output Level: 0 dBFS
    • Total Posts : 31112
    • Joined: 2006/10/28 10:53:48
    • Location: Worcester, England.
    • Status: offline
    RE: Can anyone else help? 2008/05/14 19:39:26 (permalink)

    I'm OK on SP2 thanks old pal.

    I was merely pointing out your flawed logic.

     Music:     The Coffee House Band | VeRy MeTaL

    #11
    Jump to:
    © 2024 APG vNext Commercial Version 5.1