mmarton
Max Output Level: -77 dBFS
- Total Posts : 666
- Joined: 2006/01/26 13:23:30
- Location: White Rock, B.C. Canada
- Status: offline
Hardware profiles?
Hi all, my main interface is a TC StudioKonnekt48. I also have a Yamaha THR10 amp which can also be used as an interface via usb. For my main recording I use the 48 but when noodling with my guitar and mic doing scratch song ideas I'd like to use the THR. Can you set up different interface profiles with Sonar or do I have to just launch the program and manually change the I/O driver each time? No biggie, just be nice to be able to load up a pre configured profile....
Happy Sonar Platinum 64 bit Registered Owner Epi Casino, Les Paul, Strat, Martin GPCPA3, Cort C4Z bass, Roland D20 Synth, TC Konnekt48, Sansamp BDDI, Roland JDXI, APS Klasiks, Windows 10 64bit
|
robert_e_bone
Moderator
- Total Posts : 8968
- Joined: 2007/12/26 22:09:28
- Location: Palatine, IL
- Status: offline
Re: Hardware profiles?
2014/09/18 10:47:10
(permalink)
I have not tried this, but I think if you were to set up another Windows user account, those settings might be associated with the Windows user, and would then give you an automated change of devices when launching Sonar. It should just take you a few minutes to try out the above - hope it works. I think some folks may do this kind of thing by maintaining multiple copies of the Sonar aud.ini file, which is stored in the hidden application data folder (might be in program data folder, which is also hidden). They do a rename exercise to switch between different versions of this file. I do not know all of what is maintained in that file, and personally, I would likely opt for setting up a different user account in Windows instead (if it works). Hope either of the above get you where you wanted to go. Bob Bone
Wisdom is a giant accumulation of "DOH!" Sonar: Platinum (x64), X3 (x64) Audio Interfaces: AudioBox 1818VSL, Steinberg UR-22 Computers: 1) i7-2600 k, 32 GB RAM, Windows 8.1 Pro x64 & 2) AMD A-10 7850 32 GB RAM Windows 10 Pro x64 Soft Synths: NI Komplete 8 Ultimate, Arturia V Collection, many others MIDI Controllers: M-Audio Axiom Pro 61, Keystation 88es Settings: 24-Bit, Sample Rate 48k, ASIO Buffer Size 128, Total Round Trip Latency 9.7 ms
|
mmarton
Max Output Level: -77 dBFS
- Total Posts : 666
- Joined: 2006/01/26 13:23:30
- Location: White Rock, B.C. Canada
- Status: offline
Re: Hardware profiles?
2014/09/18 12:38:26
(permalink)
Thanks Bob. It's probably faster and easier to just go to preferences and select the proper driver.
Happy Sonar Platinum 64 bit Registered Owner Epi Casino, Les Paul, Strat, Martin GPCPA3, Cort C4Z bass, Roland D20 Synth, TC Konnekt48, Sansamp BDDI, Roland JDXI, APS Klasiks, Windows 10 64bit
|
AT
Max Output Level: 0 dBFS
- Total Posts : 10654
- Joined: 2004/01/09 10:42:46
- Location: TeXaS
- Status: offline
Re: Hardware profiles?
2014/09/18 12:44:21
(permalink)
Same thing for me. I have a TCK 48 but have been using a Tascam lately. It is a pain to switch drivers, but is a first world pain. @
https://soundcloud.com/a-pleasure-dome http://www.bnoir-film.com/ there came forth little children out of the city, and mocked him, and said unto him, Go up, thou bald head; go up, thou bald head. 24 And he turned back, and looked on them, and cursed them in the name of the Lord. And there came forth two she bears out of the wood, and tare forty and two children of them.
|
Sanderxpander
Max Output Level: -36.5 dBFS
- Total Posts : 3873
- Joined: 2013/09/30 10:08:24
- Status: offline
Re: Hardware profiles?
2014/09/18 12:50:18
(permalink)
If you give your inputs/outputs "friendly names" at least it remembers which to use after a switch.
|
microapp
Max Output Level: -77 dBFS
- Total Posts : 653
- Joined: 2013/10/31 12:21:31
- Location: Wondervu, CO
- Status: offline
Re: Hardware profiles?
2014/09/18 18:01:55
(permalink)
There is an old thread about adding command line parameters to Sonar 5. I am not at my studio PC right now. Anyone know if this has ever been done. I do not see it in the docs. There should be command line options for specifying alternate aud.ini and cakewalk.ini files. If this were available you could simply have multiple sonar icons each with its unique command line specifying a unique hardware setup. This would be trivial to add to code since you are essentially replacing strings. Bakers, please consider adding this in X4. Michael
Sonar Platinum, Cubase Pro 8.5, Reaper 5, Studio One 2Melodyne Studio 4, Finale 2012I7-5820K 4.5GHz, 32 GB DDR4-2800,3 monitors,Win 10 ProToshiba P75-A7100,l7-4900 2.4 Ghz/8MB Win 8.1 ProTascam FW-1884, Emu 0404USB, CMC-AI,Axiom 61Yamaha HS-50's, Sony SA-W2500, Sennheiser RS170's, ATH-M50Ibanez Jem7VWH, RG-1570Jackson DK2-S(Sustainiac),Les Paul CustomDigitech Valve-FX, GFX-1,TSR-24,RP-90
|
RobMc
Max Output Level: -90 dBFS
- Total Posts : 14
- Joined: 2014/01/06 07:44:08
- Location: Dublin
- Status: offline
Re: Hardware profiles?
2014/09/19 11:41:50
(permalink)
microapp There is an old thread about adding command line parameters to Sonar 5. I am not at my studio PC right now. Anyone know if this has ever been done. I do not see it in the docs. There should be command line options for specifying alternate aud.ini and cakewalk.ini files. If this were available you could simply have multiple sonar icons each with its unique command line specifying a unique hardware setup. This would be trivial to add to code since you are essentially replacing strings. Bakers, please consider adding this in X4. Michael
You could possibly do that as a series of .bat scripts. To rename which .ini you want to use, then launch sonar. I was thinking of a similar thing to the query in the OP earlier, to be able to switch between my PCI sound card and my USB device. Might see if I can get it through this over the weekend.
|
microapp
Max Output Level: -77 dBFS
- Total Posts : 653
- Joined: 2013/10/31 12:21:31
- Location: Wondervu, CO
- Status: offline
Re: Hardware profiles?
2014/09/19 18:11:35
(permalink)
I was thinking about writing a little menu program which listed multiple custom aud.ini files. You pick one and it overwrites the real aud.ini file then launches sonar. I guess it should include a means to copy and rename the current aud.ini. It should probably include the same for cakewalk.ini. To keep things simple and accessible I would make a sonar_cfg.txt file which would contain a cfg name followed by an aud.ini filename and cakewalk.ini filename. When the program is run, it would read the sonar_cfg.txt file and put the entries in a menu. You click on the desired config and sonar launches with the new cfg's. Naturally you could edit the sonar_cfg.txt file with notepad. THe sonar_cfg.txt file would look like this [My config 1] aud_tascam.ini cake_tascam.ini [My config 2] aud_emu.ini cake_emu.ini The menu in the program would look like this My config 1 My config 2 Would something like this be of any use to anyone. I have been thinking of a way to pay it forward for all the help I have gotten from the forum. I have done similar programs many times so it would be a cut and paste thing. Michael
Sonar Platinum, Cubase Pro 8.5, Reaper 5, Studio One 2Melodyne Studio 4, Finale 2012I7-5820K 4.5GHz, 32 GB DDR4-2800,3 monitors,Win 10 ProToshiba P75-A7100,l7-4900 2.4 Ghz/8MB Win 8.1 ProTascam FW-1884, Emu 0404USB, CMC-AI,Axiom 61Yamaha HS-50's, Sony SA-W2500, Sennheiser RS170's, ATH-M50Ibanez Jem7VWH, RG-1570Jackson DK2-S(Sustainiac),Les Paul CustomDigitech Valve-FX, GFX-1,TSR-24,RP-90
|
microapp
Max Output Level: -77 dBFS
- Total Posts : 653
- Joined: 2013/10/31 12:21:31
- Location: Wondervu, CO
- Status: offline
Re: Hardware profiles?
2014/09/19 18:11:36
(permalink)
It would probably be a good idea to save the current .ini files when the config program runs and restore them when it exits.
Sonar Platinum, Cubase Pro 8.5, Reaper 5, Studio One 2Melodyne Studio 4, Finale 2012I7-5820K 4.5GHz, 32 GB DDR4-2800,3 monitors,Win 10 ProToshiba P75-A7100,l7-4900 2.4 Ghz/8MB Win 8.1 ProTascam FW-1884, Emu 0404USB, CMC-AI,Axiom 61Yamaha HS-50's, Sony SA-W2500, Sennheiser RS170's, ATH-M50Ibanez Jem7VWH, RG-1570Jackson DK2-S(Sustainiac),Les Paul CustomDigitech Valve-FX, GFX-1,TSR-24,RP-90
|