Helpful ReplySOLVED! Help! Can't Get The Maschine Controller To Operate Properly Inside Of Cakewalk (CxB)

Page: 12345.. > >> Showing page 1 of 7
Author
samson7842
Max Output Level: -85 dBFS
  • Total Posts : 287
  • Joined: 2005/05/07 14:32:31
  • Status: offline
2018/05/24 18:29:56 (permalink)
0

SOLVED! Help! Can't Get The Maschine Controller To Operate Properly Inside Of Cakewalk (CxB)

So, suddenly when I open Maschine as a VST, it doesn't start the Maschine controller properly. It comes on. However, the screens are blank and all of the buttons are lit up white. The whole unit is unresponsive.

I've opened Maschine up inside of Studio One and it works fine. I've opened it up as a stand alone and it works fine. I've completely uninstalled the program, restarted my PC, reinstalled Maschine then rescanned my plug-ins. Yet, I still have the same problem.

Everything was working fine a few days ago. Now, I can't figure out how to fix this. And, I'm usually pretty good at figuring these things. Any ideas?

BTW, I have Maschine MK3 with all the latest updates.
post edited by samson7842 - 2018/08/02 07:54:33

Lateef Murdock
 
Gear:
Dell XPS 8700
i7-4770 3.9 GHz
24 GB Dual Channel DDR3 160MHZ 4DIMMs
Windows 10 64bit
Cakewalk (CxB)
Sonar Platinum
Studio One 4
Komplete 9 Ultimate
Maschine 2.7 MK3
Edirol PCR 500
Roland A-300 Pro 
Steinberg Virtual Guitarist 2
Virtual Guitarist Silk
Virtual Guitarist Amber
Virtual Guitarist Iron
Steinberg UR22
Waves Gold
Melodyne 4 Studio
Various other fiddly bits
#1
samson7842
Max Output Level: -85 dBFS
  • Total Posts : 287
  • Joined: 2005/05/07 14:32:31
  • Status: offline
Re: Help! Can't Get Maschine To Work Properly As A VST Inside Cakewalk (CxB) 2018/05/25 00:38:26 (permalink)
0
Also, works fine in Reaper.

Lateef Murdock
 
Gear:
Dell XPS 8700
i7-4770 3.9 GHz
24 GB Dual Channel DDR3 160MHZ 4DIMMs
Windows 10 64bit
Cakewalk (CxB)
Sonar Platinum
Studio One 4
Komplete 9 Ultimate
Maschine 2.7 MK3
Edirol PCR 500
Roland A-300 Pro 
Steinberg Virtual Guitarist 2
Virtual Guitarist Silk
Virtual Guitarist Amber
Virtual Guitarist Iron
Steinberg UR22
Waves Gold
Melodyne 4 Studio
Various other fiddly bits
#2
Jesse G
Max Output Level: -33 dBFS
  • Total Posts : 4205
  • Joined: 2004/04/14 01:43:43
  • Status: offline
Re: Help! Can't Get Maschine To Work Properly As A VST Inside Cakewalk (CxB) 2018/05/25 00:52:05 (permalink)
0
Here, watch this  ~~~>  Insert Machine VST into Cakewalk
 
I have Komplete Select 11, therefore, I don't have Machine.  But If I did owne Machine, it would be awesome!!!
 

Peace,
Jesse G. A fisher of men  <><
==============================
Cakewalk and I are going places together!

Sonar Platinum, Windows 10 Pro- 64 bit, Gigabyte GA-Z97X-SLI, Intel Core i5-4460 Haswell Processor, Crucial Ballistix 32 GB Ram, PNY GeForce GTX 750, Roland Octa-Capture, Mackie Big Knob, Mackie Universal Controller (MCU), KRK V4's, KRK Rockit 6, Korg TR-61 Workstation, M-Audio Code 49 MIDI keyboard controller.
#3
samson7842
Max Output Level: -85 dBFS
  • Total Posts : 287
  • Joined: 2005/05/07 14:32:31
  • Status: offline
Re: Help! Can't Get Maschine To Work Properly As A VST Inside Cakewalk (CxB) 2018/05/25 03:09:15 (permalink)
0
Thank you. But, that's not the problem I'm having.

I thought it was the Maschine controller, itself. But, it works fine in every other DAW I have. So, there's definitely something wrong with the way Cakewalk is communicating with the controller.

I'm going to completely uninstal Cakewalk. Then reinstal. See if that helps.

Lateef Murdock
 
Gear:
Dell XPS 8700
i7-4770 3.9 GHz
24 GB Dual Channel DDR3 160MHZ 4DIMMs
Windows 10 64bit
Cakewalk (CxB)
Sonar Platinum
Studio One 4
Komplete 9 Ultimate
Maschine 2.7 MK3
Edirol PCR 500
Roland A-300 Pro 
Steinberg Virtual Guitarist 2
Virtual Guitarist Silk
Virtual Guitarist Amber
Virtual Guitarist Iron
Steinberg UR22
Waves Gold
Melodyne 4 Studio
Various other fiddly bits
#4
samson7842
Max Output Level: -85 dBFS
  • Total Posts : 287
  • Joined: 2005/05/07 14:32:31
  • Status: offline
Re: Help! Can't Get Maschine To Work Properly As A VST Inside Cakewalk (CxB) 2018/05/25 20:43:15 (permalink)
0
Tried a reinstall. Still the same issue. However, I did notice that the pads will trigger sounds. Yet, they remain white and the screens are all blank.

Lateef Murdock
 
Gear:
Dell XPS 8700
i7-4770 3.9 GHz
24 GB Dual Channel DDR3 160MHZ 4DIMMs
Windows 10 64bit
Cakewalk (CxB)
Sonar Platinum
Studio One 4
Komplete 9 Ultimate
Maschine 2.7 MK3
Edirol PCR 500
Roland A-300 Pro 
Steinberg Virtual Guitarist 2
Virtual Guitarist Silk
Virtual Guitarist Amber
Virtual Guitarist Iron
Steinberg UR22
Waves Gold
Melodyne 4 Studio
Various other fiddly bits
#5
godino
Max Output Level: -82 dBFS
  • Total Posts : 401
  • Joined: 2008/06/16 15:01:40
  • Location: Born in Yorks Live in Lancs(Fleetwood) UK
  • Status: offline
Re: Help! Can't Get Maschine To Work Properly As A VST Inside Cakewalk (CxB) 2018/05/25 22:27:48 (permalink)
+1 (1)
Wow talk about deja vu!!!
 
I submitted the exact same post a couple of days ago
I have the exact same problem with the MK3
Don't know if you have any previous versions of sonar, but X1 X2 and X3 all work normally with the MK3
platinum and CbB exhibit the same problem on my system that you are describing
I have already spent hours trying to find a solution - but no luck
It makes me feel better that there's a least 2 of us with the same problem, probably means the set ups within our systems isn't the cause
I am in contact with a guy called Niall at Native instruments he is going to download a copy of CbB himself to test out with the MK3
Perhaps wouldn't be a bad idea to contact him yourself so he knows it's affecting more than one user
I will let you know what he comes up with
Gordon
 
 
 
 
 
post edited by godino - 2018/05/26 22:54:23

gordo

Sonar Platinum - intel I7 7700K - Windows 10 home 64 bit - focusrite 214i -  Roland Guitar Synth GR55 - Maschine Mk3 - Oxygen8 keyboard - Guitars basses etc
#6
samson7842
Max Output Level: -85 dBFS
  • Total Posts : 287
  • Joined: 2005/05/07 14:32:31
  • Status: offline
Can't Get NI's Maschine Controller To Operate Properly Inside Of Cakewalk (CxB) 2018/05/25 23:49:11 (permalink)
0
So, suddenly when I open Maschine as a VST, it doesn't start the Maschine controller properly. It comes on. However, the screens are blank and all of the buttons are lit up white. I thought it was the Maschine controller, itself. But, it works fine in every other DAW I have. So, there's definitely something wrong with the way Cakewalk(CxB) is communicating with the controller.
 
I've opened Maschine inside of Studio One and it works fine. I've opened it up as a stand alone and it works fine. I've completely uninstalled the program, restarted my PC, reinstalled Maschine then rescanned my plug-ins. Yet, I still have the same problem. Also, works fine in Reaper.
 
I've uninstalled Cakewalk(CxB) and reinstalled it. Still, the same behavior. However, I did notice that the pads will trigger sounds. Yet, they remain white (as does all of the other illuminated buttons) and the screens are all blank.
Maybe, there's some type of "VST memory" that Cakewalk(CxB) has, that isn't getting deleted when I uninstall and re-install Cakewalk (CxB)?

Lateef Murdock
 
Gear:
Dell XPS 8700
i7-4770 3.9 GHz
24 GB Dual Channel DDR3 160MHZ 4DIMMs
Windows 10 64bit
Cakewalk (CxB)
Sonar Platinum
Studio One 4
Komplete 9 Ultimate
Maschine 2.7 MK3
Edirol PCR 500
Roland A-300 Pro 
Steinberg Virtual Guitarist 2
Virtual Guitarist Silk
Virtual Guitarist Amber
Virtual Guitarist Iron
Steinberg UR22
Waves Gold
Melodyne 4 Studio
Various other fiddly bits
#7
Klaus
Max Output Level: -84 dBFS
  • Total Posts : 318
  • Joined: 2009/07/14 07:34:02
  • Location: Cologne, Germany
  • Status: offline
Re: Help! Can't Get Maschine To Work Properly As A VST Inside Cakewalk (CxB) 2018/05/25 23:56:57 (permalink)
0
I don't have an MK3, only MK2, so can't test it unfortunately.
 
Sorry, I know, this is most probably too obvious, but since it works with other DAWs on your computer...
 
You said the MK3 sends MIDI (triggering sounds) but doesn't receive MIDI (all pads white, blank screens).

Is the device configured with both Input AND Output in "Preferences - MIDI - Devices"?
 
Best,
Klaus
 

SONAR Platinum 
RME HDSPe AIO - Windows 10 64bit - Intel i7 2600K - 16 GB RAM
 
 
 
 
#8
godino
Max Output Level: -82 dBFS
  • Total Posts : 401
  • Joined: 2008/06/16 15:01:40
  • Location: Born in Yorks Live in Lancs(Fleetwood) UK
  • Status: offline
Re: Help! Can't Get Maschine To Work Properly As A VST Inside Cakewalk (CxB) 2018/05/26 06:34:57 (permalink)
0
Hi Klaus
Can't speak for Lateef , but I've tried every combination of midi in/out preference settings I can think of in sonar and maschine(even some ridiculous ones!!) To try to get the controller to work.
 
But no luck,  after altering the settings, I start platinum or CbB then add maschine as a soft synth, the two screens on the controller go blank and every button/pad lights up
 
You can still use the software part of maschine and load up say a drum kit, and the 16 pads on the controller will sound when pressed, but none of the other buttons on the controller are usable and remain lit, and the 2 screens remain blank.
Gordon
post edited by godino - 2018/05/26 22:56:01

gordo

Sonar Platinum - intel I7 7700K - Windows 10 home 64 bit - focusrite 214i -  Roland Guitar Synth GR55 - Maschine Mk3 - Oxygen8 keyboard - Guitars basses etc
#9
ØSkald
Max Output Level: -68 dBFS
  • Total Posts : 1127
  • Joined: 2010/12/22 16:52:47
  • Location: Norway
  • Status: offline
Re: Help! Can't Get Maschine To Work Properly As A VST Inside Cakewalk (CxB) 2018/05/27 14:42:46 (permalink)
+1 (1)
I have the same problem with the Komplete Kontrol S61 MK1 keyboard. I think there is something Native Instruments have done. It doesn't work in CbB, Sonar and Studio One. But works like a charm in Cubase Pro. As a midi keyboard it works fine. It's just the controller functions that is blank.

Asus TUF Z370-Pro Gaming, Bugera Trirec Infinium, Cakewalk Platinum, Corsair RM750 750W, Corsair Vengeance DDR4 4x8GB, Gigabyte GTX 960 2GB, Genelec 6010A with 5040A sub, Ibanez AEG10II BK, Ibanez Iron Label RGIR27E BK, Ibanez Iron Label RGIR28FE BK, Ibanez RG550 RF, Ibanez RG570 FMCS, Ibanez SR506 BM, Intel Core i7 8700K, USB, NI Komplete 11 Ultimate with Kontrol S61, Samsung 960 EVO M.2 NVMe SSD, Samsung SSDs 840 EVO 1TB, Toontrack EZdrummer 2, Toontrack EZMix 2, Toontrack Superior Drummer 3, UA Apollo Twin Duo, Windows 10 Pro
#10
ØSkald
Max Output Level: -68 dBFS
  • Total Posts : 1127
  • Joined: 2010/12/22 16:52:47
  • Location: Norway
  • Status: offline
Re: Help! Can't Get Maschine To Work Properly As A VST Inside Cakewalk (CxB) 2018/05/27 14:43:59 (permalink)
0
I have contact with NI service about this.

Asus TUF Z370-Pro Gaming, Bugera Trirec Infinium, Cakewalk Platinum, Corsair RM750 750W, Corsair Vengeance DDR4 4x8GB, Gigabyte GTX 960 2GB, Genelec 6010A with 5040A sub, Ibanez AEG10II BK, Ibanez Iron Label RGIR27E BK, Ibanez Iron Label RGIR28FE BK, Ibanez RG550 RF, Ibanez RG570 FMCS, Ibanez SR506 BM, Intel Core i7 8700K, USB, NI Komplete 11 Ultimate with Kontrol S61, Samsung 960 EVO M.2 NVMe SSD, Samsung SSDs 840 EVO 1TB, Toontrack EZdrummer 2, Toontrack EZMix 2, Toontrack Superior Drummer 3, UA Apollo Twin Duo, Windows 10 Pro
#11
ØSkald
Max Output Level: -68 dBFS
  • Total Posts : 1127
  • Joined: 2010/12/22 16:52:47
  • Location: Norway
  • Status: offline
Re: Help! Can't Get Maschine To Work Properly As A VST Inside Cakewalk (CxB) 2018/05/27 14:56:58 (permalink)
0
Suddenly Studio One is working with NI hardware.
 
Can it be that NI is coding its hardware to not work on "unsuportet" hardware?

Asus TUF Z370-Pro Gaming, Bugera Trirec Infinium, Cakewalk Platinum, Corsair RM750 750W, Corsair Vengeance DDR4 4x8GB, Gigabyte GTX 960 2GB, Genelec 6010A with 5040A sub, Ibanez AEG10II BK, Ibanez Iron Label RGIR27E BK, Ibanez Iron Label RGIR28FE BK, Ibanez RG550 RF, Ibanez RG570 FMCS, Ibanez SR506 BM, Intel Core i7 8700K, USB, NI Komplete 11 Ultimate with Kontrol S61, Samsung 960 EVO M.2 NVMe SSD, Samsung SSDs 840 EVO 1TB, Toontrack EZdrummer 2, Toontrack EZMix 2, Toontrack Superior Drummer 3, UA Apollo Twin Duo, Windows 10 Pro
#12
godino
Max Output Level: -82 dBFS
  • Total Posts : 401
  • Joined: 2008/06/16 15:01:40
  • Location: Born in Yorks Live in Lancs(Fleetwood) UK
  • Status: offline
Re: Help! Can't Get Maschine To Work Properly As A VST Inside Cakewalk (CxB) 2018/05/27 19:05:30 (permalink)
0
Jarsve
Can it be that NI is coding its hardware to not work on "unsuportet" hardware?


Don't think so
The guy from NI didn't mention anything about Maschine not working with Sonar/CbB, and as mentioned in my previous post is downloading CbB to test with Maschine 3
Also
I found that X1 X2 and X3 all worked with the Maschine Mk3 plugin whereas Platinum didn't




 

gordo

Sonar Platinum - intel I7 7700K - Windows 10 home 64 bit - focusrite 214i -  Roland Guitar Synth GR55 - Maschine Mk3 - Oxygen8 keyboard - Guitars basses etc
#13
ØSkald
Max Output Level: -68 dBFS
  • Total Posts : 1127
  • Joined: 2010/12/22 16:52:47
  • Location: Norway
  • Status: offline
Re: Help! Can't Get Maschine To Work Properly As A VST Inside Cakewalk (CxB) 2018/05/28 15:28:39 (permalink)
0
godino
Don't think so
The guy from NI didn't mention anything about Maschine not working with Sonar/CbB, and as mentioned in my previous post is downloading CbB to test with Maschine 3
Also
I found that X1 X2 and X3 all worked with the Maschine Mk3 plugin whereas Platinum didn't

 
I am in contact with them now. Have you gotten any answer more han this?
 
Just now he told me that it would work with Komplete Kontrol.exe 2.0.2 and he was sure i had 2.0, but of course i have 2.0.2. I upgrade via Native Access. I had to hard explain that I only wanted control over the plug-in via the keyboard and to se the plug-in data on it.
 
Are there more people struggle with anything like this?

Asus TUF Z370-Pro Gaming, Bugera Trirec Infinium, Cakewalk Platinum, Corsair RM750 750W, Corsair Vengeance DDR4 4x8GB, Gigabyte GTX 960 2GB, Genelec 6010A with 5040A sub, Ibanez AEG10II BK, Ibanez Iron Label RGIR27E BK, Ibanez Iron Label RGIR28FE BK, Ibanez RG550 RF, Ibanez RG570 FMCS, Ibanez SR506 BM, Intel Core i7 8700K, USB, NI Komplete 11 Ultimate with Kontrol S61, Samsung 960 EVO M.2 NVMe SSD, Samsung SSDs 840 EVO 1TB, Toontrack EZdrummer 2, Toontrack EZMix 2, Toontrack Superior Drummer 3, UA Apollo Twin Duo, Windows 10 Pro
#14
ØSkald
Max Output Level: -68 dBFS
  • Total Posts : 1127
  • Joined: 2010/12/22 16:52:47
  • Location: Norway
  • Status: offline
Re: Help! Can't Get Maschine To Work Properly As A VST Inside Cakewalk (CxB) 2018/05/28 18:21:04 (permalink)
0
My quest is now a bug report.

Asus TUF Z370-Pro Gaming, Bugera Trirec Infinium, Cakewalk Platinum, Corsair RM750 750W, Corsair Vengeance DDR4 4x8GB, Gigabyte GTX 960 2GB, Genelec 6010A with 5040A sub, Ibanez AEG10II BK, Ibanez Iron Label RGIR27E BK, Ibanez Iron Label RGIR28FE BK, Ibanez RG550 RF, Ibanez RG570 FMCS, Ibanez SR506 BM, Intel Core i7 8700K, USB, NI Komplete 11 Ultimate with Kontrol S61, Samsung 960 EVO M.2 NVMe SSD, Samsung SSDs 840 EVO 1TB, Toontrack EZdrummer 2, Toontrack EZMix 2, Toontrack Superior Drummer 3, UA Apollo Twin Duo, Windows 10 Pro
#15
godino
Max Output Level: -82 dBFS
  • Total Posts : 401
  • Joined: 2008/06/16 15:01:40
  • Location: Born in Yorks Live in Lancs(Fleetwood) UK
  • Status: offline
Re: Help! Can't Get Maschine To Work Properly As A VST Inside Cakewalk (CxB) 2018/05/28 18:53:09 (permalink) ☄ Helpfulby Jarsve 2018/05/29 22:24:44
0
Hi Jarves
Just got a reply back from NI
Niall says that he has downloaded CbB but cannot recreate the problem that I and the original 
Op have been getting
He has suggested reporting the problem to Bandlab, which I will do
 
I have only recently acquired maschine 3 and so this is the first attempt to add maschine as a plugin to Platinum or CbB
The original op who posted the thread ( I haven't been able to contact) said that this controller problem had happened only recently, so I have been assuming that it had been working previouslg with CbB and Platinum
But cannot confirm this
 
Gordon
 
 
 
 
 

gordo

Sonar Platinum - intel I7 7700K - Windows 10 home 64 bit - focusrite 214i -  Roland Guitar Synth GR55 - Maschine Mk3 - Oxygen8 keyboard - Guitars basses etc
#16
samson7842
Max Output Level: -85 dBFS
  • Total Posts : 287
  • Joined: 2005/05/07 14:32:31
  • Status: offline
Re: Help! Can't Get Maschine To Work Properly As A VST Inside Cakewalk (CxB) 2018/05/29 08:03:33 (permalink)
0
Hey guys,

Sorry I dissapeared. I've been working on a deadline and really needed to get these songs demoed. So, thought it best to just work around the problem than try to spend anymore time (I'd already lost 2 days trying to figure it out) attempting to fix it. Plus, it's a holiday weekend. I'm not expecting to hear anything back from the bakers (are we still calling them that?) until Tuesday.

But, I did send an email to Bandlab about the issue as well as make a bug report in the provided forum space. I didn't attempt to contact NI because Maschine works as expected in the other DAWs I own which makes me believe it's a CxB problem.

Things had been working great in Cakewalk (CxB) as late as a couple of weeks ago. After that, I hadn't done anything until this past week when I originated the forum request for help. So, this is something new.

I wonder if it's a Windows update or the latest CxB that could be the culprit?

Also, I tried looking for Niall at NI, but there's more than a few that come up when I do a search. Do you have any contact info on him?

Best,
Lateef

Lateef Murdock
 
Gear:
Dell XPS 8700
i7-4770 3.9 GHz
24 GB Dual Channel DDR3 160MHZ 4DIMMs
Windows 10 64bit
Cakewalk (CxB)
Sonar Platinum
Studio One 4
Komplete 9 Ultimate
Maschine 2.7 MK3
Edirol PCR 500
Roland A-300 Pro 
Steinberg Virtual Guitarist 2
Virtual Guitarist Silk
Virtual Guitarist Amber
Virtual Guitarist Iron
Steinberg UR22
Waves Gold
Melodyne 4 Studio
Various other fiddly bits
#17
godino
Max Output Level: -82 dBFS
  • Total Posts : 401
  • Joined: 2008/06/16 15:01:40
  • Location: Born in Yorks Live in Lancs(Fleetwood) UK
  • Status: offline
Re: Help! Can't Get Maschine To Work Properly As A VST Inside Cakewalk (CxB) 2018/05/29 08:43:02 (permalink)
0
Hi Lateef
 
I've been wondering about a recent Windows 10 update myself
Windows updated just before I had this controller problem, and caused me a few problems that took a while to sort out.
One problem was that when I booted my pc up I had no sound, found out that Windows had enable a fast start option on the 'power options' settings page, which stopped my focusrite 214 audio interface from working.
so it does seem quite a problematic update!
 
As I mentioned in a prev post Maschine mk3 is new to me - did Sonar Platinum and CbB work with the mk3 as a plugin until recently??
 
also as mentioned - Niall at NI cannot recreate the problem, but his system set up could be completely different to mine.
I do not have a unique email address for him
I just sent in the original error report and reply to the emails he sends
the generic address is support@nativeinstruments.zendesk.com 
but not sure it will get to him if you just email this address.  
 
Glad you reported it to Bandlab - I will do so aswell
 
Gordon
 
 

gordo

Sonar Platinum - intel I7 7700K - Windows 10 home 64 bit - focusrite 214i -  Roland Guitar Synth GR55 - Maschine Mk3 - Oxygen8 keyboard - Guitars basses etc
#18
samson7842
Max Output Level: -85 dBFS
  • Total Posts : 287
  • Joined: 2005/05/07 14:32:31
  • Status: offline
Re: Can't Get NI's Maschine Controller To Operate Properly Inside Of Cakewalk (CxB) 2018/05/30 19:59:47 (permalink)
+1 (1)
This is still an issue for me and at least one other person.

Lateef Murdock
 
Gear:
Dell XPS 8700
i7-4770 3.9 GHz
24 GB Dual Channel DDR3 160MHZ 4DIMMs
Windows 10 64bit
Cakewalk (CxB)
Sonar Platinum
Studio One 4
Komplete 9 Ultimate
Maschine 2.7 MK3
Edirol PCR 500
Roland A-300 Pro 
Steinberg Virtual Guitarist 2
Virtual Guitarist Silk
Virtual Guitarist Amber
Virtual Guitarist Iron
Steinberg UR22
Waves Gold
Melodyne 4 Studio
Various other fiddly bits
#19
samson7842
Max Output Level: -85 dBFS
  • Total Posts : 287
  • Joined: 2005/05/07 14:32:31
  • Status: offline
Re: Help! Can't Get Maschine To Work Properly As A VST Inside Cakewalk (CxB) 2018/05/30 20:07:32 (permalink)
0
Has anyone heard anything back from Bandlab regarding this? I haven't gotten any responses to my emails or my post on the bug report page of the forum.

Lateef Murdock
 
Gear:
Dell XPS 8700
i7-4770 3.9 GHz
24 GB Dual Channel DDR3 160MHZ 4DIMMs
Windows 10 64bit
Cakewalk (CxB)
Sonar Platinum
Studio One 4
Komplete 9 Ultimate
Maschine 2.7 MK3
Edirol PCR 500
Roland A-300 Pro 
Steinberg Virtual Guitarist 2
Virtual Guitarist Silk
Virtual Guitarist Amber
Virtual Guitarist Iron
Steinberg UR22
Waves Gold
Melodyne 4 Studio
Various other fiddly bits
#20
godino
Max Output Level: -82 dBFS
  • Total Posts : 401
  • Joined: 2008/06/16 15:01:40
  • Location: Born in Yorks Live in Lancs(Fleetwood) UK
  • Status: offline
Re: Help! Can't Get Maschine To Work Properly As A VST Inside Cakewalk (CxB) 2018/05/30 22:03:18 (permalink)
0
Yes i got an email from bandlab support today
i have cut and pasted it below
----------
Hi there,
Thanks for reaching out to us Were you using the Maschine MK3 as you wanted to within SONAR X1/X2/X3? Cakewalk by BandLab offers identical core features to that of SONAR Platinum, so configuring your device should be a similar experience to what you had done in the past. If you have a previous version of SONAR running with the controller as you want it, open that versions Preferences menu and check out your MIDI/control surfaces preferences. You should be able to apply these same settings to our new version and have the same end result. If you make any changes or reconfigure any settings within the new version, be sure to click Apply to save your changes!
You may also want to reach out to Native Instruments for any tutorials regarding using Maschine MK3 within a DAW, setup and practices for best integration, etc.
Let me know if you have any other questions we can help with!
--------------
not really the answer i was after
I have replied informing support that my preference settings in Platinum/CbB are the same as in X1 X2 and X3 and that other daws and previous versions of sonar work fine with Maschine mk3
I await their reply
Gordon

gordo

Sonar Platinum - intel I7 7700K - Windows 10 home 64 bit - focusrite 214i -  Roland Guitar Synth GR55 - Maschine Mk3 - Oxygen8 keyboard - Guitars basses etc
#21
samson7842
Max Output Level: -85 dBFS
  • Total Posts : 287
  • Joined: 2005/05/07 14:32:31
  • Status: offline
Re: Help! Can't Get Maschine To Work Properly As A VST Inside Cakewalk (CxB) 2018/05/31 08:47:02 (permalink)
+1 (1)
I received an email from Mike at Bandlab. He wanted to know if I was having the same issue if I used Platinum. I informed him I did and that there was at least one other user with the same problem. He seems to understand the issue at hand, just not how to fix it, yet.

I'm thinking I'll hear back tomorrow. I'll keep you posted on whatever info I receive.

Lateef Murdock
 
Gear:
Dell XPS 8700
i7-4770 3.9 GHz
24 GB Dual Channel DDR3 160MHZ 4DIMMs
Windows 10 64bit
Cakewalk (CxB)
Sonar Platinum
Studio One 4
Komplete 9 Ultimate
Maschine 2.7 MK3
Edirol PCR 500
Roland A-300 Pro 
Steinberg Virtual Guitarist 2
Virtual Guitarist Silk
Virtual Guitarist Amber
Virtual Guitarist Iron
Steinberg UR22
Waves Gold
Melodyne 4 Studio
Various other fiddly bits
#22
ØSkald
Max Output Level: -68 dBFS
  • Total Posts : 1127
  • Joined: 2010/12/22 16:52:47
  • Location: Norway
  • Status: offline
Re: Help! Can't Get Maschine To Work Properly As A VST Inside Cakewalk (CxB) 2018/05/31 21:28:46 (permalink)
0
samson7842
I received an email from Mike at Bandlab. He wanted to know if I was having the same issue if I used Platinum. I informed him I did and that there was at least one other user with the same problem. He seems to understand the issue at hand, just not how to fix it, yet.

I'm thinking I'll hear back tomorrow. I'll keep you posted on whatever info I receive.

Great news

Asus TUF Z370-Pro Gaming, Bugera Trirec Infinium, Cakewalk Platinum, Corsair RM750 750W, Corsair Vengeance DDR4 4x8GB, Gigabyte GTX 960 2GB, Genelec 6010A with 5040A sub, Ibanez AEG10II BK, Ibanez Iron Label RGIR27E BK, Ibanez Iron Label RGIR28FE BK, Ibanez RG550 RF, Ibanez RG570 FMCS, Ibanez SR506 BM, Intel Core i7 8700K, USB, NI Komplete 11 Ultimate with Kontrol S61, Samsung 960 EVO M.2 NVMe SSD, Samsung SSDs 840 EVO 1TB, Toontrack EZdrummer 2, Toontrack EZMix 2, Toontrack Superior Drummer 3, UA Apollo Twin Duo, Windows 10 Pro
#23
ØSkald
Max Output Level: -68 dBFS
  • Total Posts : 1127
  • Joined: 2010/12/22 16:52:47
  • Location: Norway
  • Status: offline
Re: Help! Can't Get Maschine To Work Properly As A VST Inside Cakewalk (CxB) 2018/06/02 08:46:16 (permalink)
0
New upgrade today, but no fix yet.

Asus TUF Z370-Pro Gaming, Bugera Trirec Infinium, Cakewalk Platinum, Corsair RM750 750W, Corsair Vengeance DDR4 4x8GB, Gigabyte GTX 960 2GB, Genelec 6010A with 5040A sub, Ibanez AEG10II BK, Ibanez Iron Label RGIR27E BK, Ibanez Iron Label RGIR28FE BK, Ibanez RG550 RF, Ibanez RG570 FMCS, Ibanez SR506 BM, Intel Core i7 8700K, USB, NI Komplete 11 Ultimate with Kontrol S61, Samsung 960 EVO M.2 NVMe SSD, Samsung SSDs 840 EVO 1TB, Toontrack EZdrummer 2, Toontrack EZMix 2, Toontrack Superior Drummer 3, UA Apollo Twin Duo, Windows 10 Pro
#24
ØSkald
Max Output Level: -68 dBFS
  • Total Posts : 1127
  • Joined: 2010/12/22 16:52:47
  • Location: Norway
  • Status: offline
Native Intruments Komplete Kontrol VST and Hardware wont work 2018/06/02 09:13:40 (permalink)
0
Hi. I am also having trouble with the NI Komplete Kontrol VST and NI Hardware.
 
My Komplete Kontrol S61 works great as a MIDI keyboard, but the VST specific things does not work. The screens on the keyboard are blanc when they should show info from the VST open in Cakewalk.
 
I would be happy to help you out with testing, and can also give you all the info I can give about this. If needed.
 
My setup is:
DAW:
CbB
Cakewalk Sonar Platinum (2017.09 23.09.31) (This version works the best)
Studio One 3.5.6.46910 Win x64 (Built on Mar 20 2018)
Cubase Pro 9.5.30
 
PC:
Asus TUF Z370-Pro Gaming,
Intel Core i7 8700K,
Corsair Vengeance DDR4 4x8GB,
Corsair RM750 750W,
Gigabyte GTX 960 2GB,
Samsung 960 EVO M.2 NVMe SSD,
Samsung SSDs 840 EVO 1TB,
UA Apollo Twin Duo USB
 
Software:
Windows 10 Pro.
NI Komplete 11 Ultimate with Kontrol S61,
Toontrack EZdrummer 2,
Toontrack EZMix 2,
Toontrack Superior Drummer 3

Asus TUF Z370-Pro Gaming, Bugera Trirec Infinium, Cakewalk Platinum, Corsair RM750 750W, Corsair Vengeance DDR4 4x8GB, Gigabyte GTX 960 2GB, Genelec 6010A with 5040A sub, Ibanez AEG10II BK, Ibanez Iron Label RGIR27E BK, Ibanez Iron Label RGIR28FE BK, Ibanez RG550 RF, Ibanez RG570 FMCS, Ibanez SR506 BM, Intel Core i7 8700K, USB, NI Komplete 11 Ultimate with Kontrol S61, Samsung 960 EVO M.2 NVMe SSD, Samsung SSDs 840 EVO 1TB, Toontrack EZdrummer 2, Toontrack EZMix 2, Toontrack Superior Drummer 3, UA Apollo Twin Duo, Windows 10 Pro
#25
pwalpwal
Max Output Level: -44 dBFS
  • Total Posts : 3106
  • Joined: 2015/01/17 03:52:50
  • Status: offline
Re: Native Intruments Komplete Kontrol VST and Hardware wont work 2018/06/02 09:15:49 (permalink)
0
Jarsve The screens on the keyboard are blanc when they should show info from the VST open in Cakewalk.

seem to remember other VSTs with this issue (the cakewalk LP plugins?) being caused by unsupported open-gl version?
sorry, mis-read your post (thought you meant the vst gui)

just a sec

#26
ØSkald
Max Output Level: -68 dBFS
  • Total Posts : 1127
  • Joined: 2010/12/22 16:52:47
  • Location: Norway
  • Status: offline
Re: Native Intruments Komplete Kontrol VST and Hardware wont work 2018/06/02 11:38:08 (permalink)
0
Here is some pictures to explain what is wrong.
 
Here is the screens on the Keyboard:

 
This is the Komplete Kontrol VST in Studio One 3:

 
This is how the screens on the Komplete Kontrol Keyboard should work:

 
This is the VST in CbB:

 
This is the blank screens:


Asus TUF Z370-Pro Gaming, Bugera Trirec Infinium, Cakewalk Platinum, Corsair RM750 750W, Corsair Vengeance DDR4 4x8GB, Gigabyte GTX 960 2GB, Genelec 6010A with 5040A sub, Ibanez AEG10II BK, Ibanez Iron Label RGIR27E BK, Ibanez Iron Label RGIR28FE BK, Ibanez RG550 RF, Ibanez RG570 FMCS, Ibanez SR506 BM, Intel Core i7 8700K, USB, NI Komplete 11 Ultimate with Kontrol S61, Samsung 960 EVO M.2 NVMe SSD, Samsung SSDs 840 EVO 1TB, Toontrack EZdrummer 2, Toontrack EZMix 2, Toontrack Superior Drummer 3, UA Apollo Twin Duo, Windows 10 Pro
#27
pwalpwal
Max Output Level: -44 dBFS
  • Total Posts : 3106
  • Joined: 2015/01/17 03:52:50
  • Status: offline
Re: Native Intruments Komplete Kontrol VST and Hardware wont work 2018/06/02 11:50:24 (permalink)
0
maybe bandlab should buy some of this hardware so they can figure it out
 

just a sec

#28
ØSkald
Max Output Level: -68 dBFS
  • Total Posts : 1127
  • Joined: 2010/12/22 16:52:47
  • Location: Norway
  • Status: offline
Re: Native Intruments Komplete Kontrol VST and Hardware wont work 2018/06/02 22:37:08 (permalink)
0
pwalpwal
maybe bandlab should buy some of this hardware so they can figure it out
 


maybe. but I will be happy to help out with every testing here on my computer. I am not in any pro recording at the moment.

Asus TUF Z370-Pro Gaming, Bugera Trirec Infinium, Cakewalk Platinum, Corsair RM750 750W, Corsair Vengeance DDR4 4x8GB, Gigabyte GTX 960 2GB, Genelec 6010A with 5040A sub, Ibanez AEG10II BK, Ibanez Iron Label RGIR27E BK, Ibanez Iron Label RGIR28FE BK, Ibanez RG550 RF, Ibanez RG570 FMCS, Ibanez SR506 BM, Intel Core i7 8700K, USB, NI Komplete 11 Ultimate with Kontrol S61, Samsung 960 EVO M.2 NVMe SSD, Samsung SSDs 840 EVO 1TB, Toontrack EZdrummer 2, Toontrack EZMix 2, Toontrack Superior Drummer 3, UA Apollo Twin Duo, Windows 10 Pro
#29
azslow3
Max Output Level: -43.5 dBFS
  • Total Posts : 3197
  • Joined: 2012/06/22 19:27:51
  • Location: Germany
  • Status: offline
Re: Native Intruments Komplete Kontrol VST and Hardware wont work 2018/06/04 17:24:27 (permalink)
0
The documentation provided by NI is effectively useless for any troubleshooting. I hoped someone with the device can give you an advise, but since CW/NI/other users keep silence...
For some "hints" in other DAWs, I suggest to try the following:
 
1) DISABLE all MIDI input and output ports related to S61 in Sonar preference (including normal MIDI port, it will no longer work as a MIDI keyboard then, I know).
2) Close Sonar.
3) start Komplete Kontrol standalone. Check it see S61
4) close Komplete Kontrol standalone.
5) start Sonar, add Komplete Kontrol VST. Does it see S61?
 
----
The background: in Ableton, install instructions for MK1 suggest ports should be set for corresponding surface script. But for MK2 they explicitly mention that ports should not be set. So my idea is that when Sonar opens these ports, they are blocked for Komplete Kontrol. That is just a pure speculation, I know, but it is easy to check...

Sonar 8LE -> Platinum infinity, REAPER, Windows 10 pro
GA-EP35-DS3L, E7500, 4GB, GTX 1050 Ti, 2x500GB
RME Babyface Pro (M-Audio Audiophile Firewire/410, VS-20), Kawai CN43, TD-11, Roland A500S, Akai MPK Mini, Keystation Pro, etc.
www.azslow.com - Control Surface Integration Platform for SONAR
#30
Page: 12345.. > >> Showing page 1 of 7
Jump to:
© 2018 APG vNext Commercial Version 5.1