scottfa
Max Output Level: -81 dBFS
- Total Posts : 453
- Joined: 2005/04/23 06:25:47
- Status: offline
Help out with Amplitube 4 crashing Platinum?
I know people here have said that Amplitube 4 VST3 is flakey, but i have ticket in to IK and i am trying to get to the root of the problem. If i do the following it will crash 85 % of the time: 1. Create a blank project 2. Add 8 audio tracks 3. Insert one instance of Amplitube 4 VST 3 on each track 4. Save the project 5. Exit Platinum using the"x" button in the upper right corner After the project is created it can just be opened , saved and if Platinum is exited as i stated it will crash within 3-5 times through the saving and exiting procedure . I have tried to replicate the crash using Reaper 5 and Studio One 3 and cannot get it to fail. I have run Prime 95, and Microsoft's memory checker but both pass. Can someone try this on their machine to see if it fails? Thanks.
post edited by John - 2017/01/05 11:33:14
Intel I7 2600K (OCed to 4.0) Gigabyte Ga-Z68X-UD3H-B3 16G Corsair 1600 Memory 4 sticks 1 SSD, 1WD 650 SATA and 1 Samsung 1G SATA Steinberg MR816X Mackie R800 Adat to the Steinberg Windows 10 64 bit Sonar Platinum Lifetime UAD-2 Solo
|
The Grim 
Max Output Level: -76 dBFS
- Total Posts : 724
- Joined: 2016/04/19 02:31:06
- Location: hades
- Status: offline
Re: Help out with Amplituve 4 crashing Platinum?
2017/01/04 23:25:36
(permalink)
hi, followed your steps and all good here. [edit] just for your info, whenever i use amplitube 4 i always use the vst3 version, never had any issues or flakeyness with it, and have never been aware that there was any.
post edited by The Grim - 2017/01/04 23:49:53
|
ralf
Max Output Level: -86 dBFS
- Total Posts : 205
- Joined: 2010/11/27 05:36:43
- Status: offline
Re: Help out with Amplituve 4 crashing Platinum?
2017/01/05 00:54:41
(permalink)
I'm using the VST2 version of AmpliTube4 with several instances in many projects. I rarely have crashes caused by AmpliTube when closing projects. I tried as you said with VST3 AmpliTube4, and I had one crash in about 15 tries.
So, I can confirm that AmpliTube4 (both VST2 and VST3) may cause crashes in Sonar when closing a project. But on my system, this happens far less often. (I'm on Windows 8.1 64bit.)
|
scottfa
Max Output Level: -81 dBFS
- Total Posts : 453
- Joined: 2005/04/23 06:25:47
- Status: offline
Re: Help out with Amplituve 4 crashing Platinum?
2017/01/05 06:41:03
(permalink)
Thanks Grim, i was hoping someone could reproduce the crash. I am using Windows 10(1511) and Platinum version 2016.10. Does this differ from your setup?
Intel I7 2600K (OCed to 4.0) Gigabyte Ga-Z68X-UD3H-B3 16G Corsair 1600 Memory 4 sticks 1 SSD, 1WD 650 SATA and 1 Samsung 1G SATA Steinberg MR816X Mackie R800 Adat to the Steinberg Windows 10 64 bit Sonar Platinum Lifetime UAD-2 Solo
|
Slugbaby
Max Output Level: -33.5 dBFS
- Total Posts : 4172
- Joined: 2004/10/01 13:57:37
- Location: Toronto, Canada
- Status: offline
Re: Help out with Amplituve 4 crashing Platinum?
2017/01/05 07:11:33
(permalink)
I just tried your process, and there was no crash on my side. Windows 8, Splat 2016.10
|
scottfa
Max Output Level: -81 dBFS
- Total Posts : 453
- Joined: 2005/04/23 06:25:47
- Status: offline
Re: Help out with Amplituve 4 crashing Platinum?
2017/01/05 07:31:48
(permalink)
Thanks Slugbaby. I assume that you tried the save, close process several times?
This is beginning to look like a problem with my system only.
Intel I7 2600K (OCed to 4.0) Gigabyte Ga-Z68X-UD3H-B3 16G Corsair 1600 Memory 4 sticks 1 SSD, 1WD 650 SATA and 1 Samsung 1G SATA Steinberg MR816X Mackie R800 Adat to the Steinberg Windows 10 64 bit Sonar Platinum Lifetime UAD-2 Solo
|
scottfa
Max Output Level: -81 dBFS
- Total Posts : 453
- Joined: 2005/04/23 06:25:47
- Status: offline
Re: Help out with Amplituve 4 crashing Platinum?
2017/01/05 07:38:03
(permalink)
Thanks ralf for confirming the possibility that maybe it is not my system. Really strange though.
Intel I7 2600K (OCed to 4.0) Gigabyte Ga-Z68X-UD3H-B3 16G Corsair 1600 Memory 4 sticks 1 SSD, 1WD 650 SATA and 1 Samsung 1G SATA Steinberg MR816X Mackie R800 Adat to the Steinberg Windows 10 64 bit Sonar Platinum Lifetime UAD-2 Solo
|
DeeringAmps
Max Output Level: -49 dBFS
- Total Posts : 2614
- Joined: 2005/10/03 10:29:25
- Location: Seattle area
- Status: offline
Re: Help out with Amplituve 4 crashing Platinum?
2017/01/05 09:13:23
(permalink)
I don't use the VST3, primarily because the ST3 VST3 was/is? known to be flaky in SONAR;
So I'm not going there.
I can't recall a "crash" linked to AMP4 on my sys. (Win 7 mind you)
I haven't install the latest AMP4 update and new Fender2 yet, planned for today/tomorrow.
Should I wait?
T
Tom Deering Tascam FW-1884 User Resources Page Firewire "Legacy" Tutorial, Service Manual, Schematic, and Service Bulletins Win10x64 StudioCat Pro Studio Coffee Lake 8086k 32gb RAM  RME UFX (Audio) Tascam FW-1884 (Control) in Win 10x64 Pro
|
scottfa
Max Output Level: -81 dBFS
- Total Posts : 453
- Joined: 2005/04/23 06:25:47
- Status: offline
Re: Help out with Amplituve 4 crashing Platinum?
2017/01/05 09:29:48
(permalink)
I wouldn't wait. I have had this problem, off and on, since Amplitube 3. While a problem, it does not seem to affect the project itself. Only seems to happen in Sonar.
Intel I7 2600K (OCed to 4.0) Gigabyte Ga-Z68X-UD3H-B3 16G Corsair 1600 Memory 4 sticks 1 SSD, 1WD 650 SATA and 1 Samsung 1G SATA Steinberg MR816X Mackie R800 Adat to the Steinberg Windows 10 64 bit Sonar Platinum Lifetime UAD-2 Solo
|
DeeringAmps
Max Output Level: -49 dBFS
- Total Posts : 2614
- Joined: 2005/10/03 10:29:25
- Location: Seattle area
- Status: offline
Re: Help out with Amplituve 4 crashing Platinum?
2017/01/05 10:24:33
(permalink)
Tom Deering Tascam FW-1884 User Resources Page Firewire "Legacy" Tutorial, Service Manual, Schematic, and Service Bulletins Win10x64 StudioCat Pro Studio Coffee Lake 8086k 32gb RAM RME UFX (Audio) Tascam FW-1884 (Control) in Win 10x64 Pro
|
The Grim
Max Output Level: -76 dBFS
- Total Posts : 724
- Joined: 2016/04/19 02:31:06
- Location: hades
- Status: offline
Re: Help out with Amplituve 4 crashing Platinum?
2017/01/05 19:52:14
(permalink)
scottfa
Thanks Grim, i was hoping someone could reproduce the crash. I am using Windows 10(1511) and Platinum version 2016.10. Does this differ from your setup?
windows 10 pro 64bit (1511) sonar platinum 2016.12 (or whatever the latest is called) amplitube 4 is the latest version, 4.1 i think it is
|
scottfa
Max Output Level: -81 dBFS
- Total Posts : 453
- Joined: 2005/04/23 06:25:47
- Status: offline
Re: Help out with Amplituve 4 crashing Platinum?
2017/01/05 21:33:03
(permalink)
I nust say that IK's support has been stellar so far. Got back to me in a day, followed up with questions and then asked for the Sonar project. I know that this will be a hard problem to solve being intermittent and all, but IK is trying.
Intel I7 2600K (OCed to 4.0) Gigabyte Ga-Z68X-UD3H-B3 16G Corsair 1600 Memory 4 sticks 1 SSD, 1WD 650 SATA and 1 Samsung 1G SATA Steinberg MR816X Mackie R800 Adat to the Steinberg Windows 10 64 bit Sonar Platinum Lifetime UAD-2 Solo
|
guitarzan97
Max Output Level: -90 dBFS
- Total Posts : 21
- Joined: 2015/01/15 08:27:30
- Status: offline
Re: Help out with Amplituve 4 crashing Platinum?
2017/03/11 21:34:12
(permalink)
I too get random crashes when exiting project where Amplitube 4 is on a track or two and have submitted crash dump file to Cakewalk. I have had problems running Amplitube 4 Standalone...long story issue realates to sample rates and changing them. Using Sonar Platinum on Windows 10 with Roland Octa-Capture Audio Interface. Everything else works perfectly on this system...
|
BobF
Max Output Level: 0 dBFS
- Total Posts : 8124
- Joined: 2003/11/05 18:43:11
- Location: Missouri - USA
- Status: offline
Re: Help out with Amplituve 4 crashing Platinum?
2017/03/11 21:48:03
(permalink)
You could always reset and run a fresh scan of your VSTs. This has cleared up plug problems more than once.
Bob -- Angels are crying because truth has died ...Illegitimi non carborundum --Studio One Pro / i7-6700@3.80GHZ, 32GB Win 10 Pro x64 Roland FA06, LX61+, Fishman Tripleplay, FaderPort, US-16x08 + ARC2.5/Event PS8s Waves Gold/IKM Max/Nomad Factory IS3/K11U
|
guitarzan97
Max Output Level: -90 dBFS
- Total Posts : 21
- Joined: 2015/01/15 08:27:30
- Status: offline
Re: Help out with Amplituve 4 crashing Platinum?
2017/03/11 22:50:46
(permalink)
I never though of doing that...thanks Bob
|
guitarzan97
Max Output Level: -90 dBFS
- Total Posts : 21
- Joined: 2015/01/15 08:27:30
- Status: offline
Re: Help out with Amplituve 4 crashing Platinum?
2017/03/12 18:20:41
(permalink)
I did what you suggested Bob and did a test after...only recreated scenario a few times, but no crash...
|