How to intergrate v studio 100 with Logic

Author
rockbinbin
Max Output Level: -90 dBFS
  • Total Posts : 10
  • Joined: 2009/08/25 00:52:30
  • Status: offline
2009/08/25 01:02:35 (permalink)

How to intergrate v studio 100 with Logic

Firstly, i am a newbie on recording, i want to use the v studio 100 as the mixer and control panel in connect with logic to record the keyboard sound. however, after i plugin everything, everything seems incorrect. i push the different botton on the v studio, it make a piano sound (works like a keyboard ).anyone know how to set up the v studio with logic pro? any reference i can refer to ? thank you
#1

6 Replies Related Threads

    Seth Perlstein [Cakewalk]
    Moderator
    • Total Posts : 2084
    • Joined: 2008/07/17 04:38:03
    • Location: Los Angeles, CA
    • Status: offline
    Re:How to intergrate v studio 100 with Logic 2009/08/25 21:17:24 (permalink)
    Hi,

    The VS-100 works with third-party DAWs in Mackie Control mode. To get this all set up you must create a Mackir Control surface in Logic and tell it to use the VS-100 Control I/O.
    #2
    Seth Perlstein [Cakewalk]
    Moderator
    • Total Posts : 2084
    • Joined: 2008/07/17 04:38:03
    • Location: Los Angeles, CA
    • Status: offline
    Re:How to intergrate v studio 100 with Logic 2009/08/26 12:21:32 (permalink)
    Also, we have a recourse page here ... http://www.cakewalk.com/s...eader.aspx?ID=20090602 ... which has step by step instructions for setting up the VS-100 with Logic.
    #3
    shanabit
    Max Output Level: -90 dBFS
    • Total Posts : 31
    • Joined: 2005/06/25 22:25:05
    • Status: offline
    Re:How to intergrate v studio 100 with Logic 2011/07/02 01:01:51 (permalink)
    ok , thats all fine and done here.  HOWEVER,  when the PLAY button is pushed on the transport on the VS 100, LOGIC goes in to a stutter effect on the transport and WILL NOT MOVE. 

      Any ideas?  Its as if the VS is sending a continuous re- start message
    #4
    trock8500
    Max Output Level: -79 dBFS
    • Total Posts : 575
    • Joined: 2007/01/14 15:13:26
    • Status: offline
    Re:How to intergrate v studio 100 with Logic 2011/07/03 12:19:13 (permalink)
    Shanabit rocks!

    he found a plugin on the ROLAND site that incorporates the VS100 perfectly with Logic

    i ran that and it all works perfectly



    www.timmallick.com
    #5
    shanabit
    Max Output Level: -90 dBFS
    • Total Posts : 31
    • Joined: 2005/06/25 22:25:05
    • Status: offline
    Re:How to intergrate v studio 100 with Logic 2011/07/03 23:24:47 (permalink)
    Soooooooo,  if you want Logic to work with your VS you need to:

    1. Update the FIRMWARE  http://cakewalk.com/Suppo...reader.aspx/2007013188
    2. Update the drivers to version 2  http://cakewalk.com/Suppo...reader.aspx/2007013188
    3. Go to www.rolandus.com and find the VS100 under support/downloads, find the VS 100 and download the Logic/GarageBand Plugin
    V-STUDIO 100 Control Surface plugin for Garage Band and Logic


    *TAKE THE VS 100 out of OTHER mode and put it back to SONAR mode for the stupid thing to work.  Go figure????????????



    #6
    trock8500
    Max Output Level: -79 dBFS
    • Total Posts : 575
    • Joined: 2007/01/14 15:13:26
    • Status: offline
    Re:How to intergrate v studio 100 with Logic 2011/07/04 09:36:37 (permalink)
    also set in and out to CONTROL under the vs100 plug settings

    www.timmallick.com
    #7
    Jump to:
    © 2024 APG vNext Commercial Version 5.1