I can not figure out why, The GT100, The HD500, the G5, and the RP1000 do not work as vst.

Author
Post
Essentials Only Full Version
Linear Phase
Max Output Level: -53 dBFS
  • Total Posts : 2201
  • Joined: 2012/04/15 02:21:15
  • Location: Ft. Lauderdale, FL USA
  • Status: offline
2013/01/21 19:15:29 (permalink)

I can not figure out why, The GT100, The HD500, the G5, and the RP1000 do not work as vst.

I am completely and totally beside myself.  

1st off, I have decided that I need a floorboard for the guitar.  Its a combo of latency, and cpu ( that I am running out of ), and I'm still not happy with these native amp sims.

What I can not, for the life me figure out, is why these floor boards, many of which are also audio interfaces, do not allow you to use them as VST and allow for re-amping.

Why would that have been so difficult to engineer?   I think its total crap btw!!!   I would by a GT100, and spend the $ if I knew I was getting the functionality of, "also a vst."  But for the hassle of it all, I might as well just go with a G5.  Because I solve my cpu and latency problem.

I will probably still be unhappy in terms of, "amp sim."

too many lasers...






Sonar = audio editing ninja of a music software!

#1

2 Replies Related Threads
    tlw
    Max Output Level: -49.5 dBFS
    • Total Posts : 2567
    • Joined: 2008/10/11 22:06:32
    • Location: West Midlands, UK
    • Status: offline
    Re:I can not figure out why, The GT100, The HD500, the G5, and the RP1000 do not work as v 2013/01/22 18:17:46 (permalink)
    How about splitting the guitar signal before the fx unit, and sending one feed to your interface? Record that dry guitar sound at the same time as you record the outputs of the fx unit (won't be able to use the built-in USB on the fx unit though...).

    Then if you need to change anything send the dry guitar track back through the fx unit (as an external hardware send - in effect re-amping it) then back into Sonar.

    Sonar Platinum 64bit, Windows 8.1 Pro 64bit, I7 3770K Ivybridge, 16GB Ram, Gigabyte Z77-D3H m/board,
    ATI 7750 graphics+ 1GB RAM, 2xIntel 520 series 220GB SSDs, 1 TB Samsung F3 + 1 TB WD HDDs, Seasonic fanless 460W psu, RME Fireface UFX, Focusrite Octopre.
    Assorted real synths, guitars, mandolins, diatonic accordions, percussion, fx and other stuff.
    #2
    Linear Phase
    Max Output Level: -53 dBFS
    • Total Posts : 2201
    • Joined: 2012/04/15 02:21:15
    • Location: Ft. Lauderdale, FL USA
    • Status: offline
    Re:I can not figure out why, The GT100, The HD500, the G5, and the RP1000 do not work as v 2013/01/22 23:06:25 (permalink)
    tlw


    How about splitting the guitar signal before the fx unit, and sending one feed to your interface? Record that dry guitar sound at the same time as you record the outputs of the fx unit (won't be able to use the built-in USB on the fx unit though...).

    Then if you need to change anything send the dry guitar track back through the fx unit (as an external hardware send - in effect re-amping it) then back into Sonar.


    That's an interesting solution..  To say the least.

    Thanks

    too many lasers...






    Sonar = audio editing ninja of a music software!

    #3
    Jump to:
    © 2024 APG vNext Commercial Version 5.1