frkfir
Max Output Level: -90 dBFS
- Total Posts : 34
- Joined: 2015/12/22 12:20:51
- Status: offline
I cant select any Input in the audio track. Please help!!! I'm New!!!
I installed according your instructions the software as well as my sound card Tascam 2x2.
Somehow, I managed for the first time I used my microphone to record sound.
But since I switched off the computer and turned on again, I plug in a guitar and a microphone, opens a new project, and I have no way to set each channel what the "Input"?
The first time I opened the program again, jumped me a message that Sonar did not recognize any sound card.
Then I restart my computer, and now there isn't this message.
The software identifies the sound card in my computer but does not give me the option Select any Input in the audio track.
I'm new in Sonar.
|
Snehankur
Max Output Level: -80 dBFS
- Total Posts : 507
- Joined: 2014/11/26 00:19:19
- Status: offline
Re: I cant select any Input in the audio track. Please help!!! I'm New!!!
2015/12/24 04:14:42
(permalink)
Please check OPTION>PREERENCE>AUDIO tab. Is the card visible?
[I am not in front of my DAW. But start checking from here.]
Regards
SG
|
frkfir
Max Output Level: -90 dBFS
- Total Posts : 34
- Joined: 2015/12/22 12:20:51
- Status: offline
Re: I cant select any Input in the audio track. Please help!!! I'm New!!!
2015/12/24 05:04:52
(permalink)
yes he is there and visible.
|
frkfir
Max Output Level: -90 dBFS
- Total Posts : 34
- Joined: 2015/12/22 12:20:51
- Status: offline
Re: I cant select any Input in the audio track. Please help!!! I'm New!!!
2015/12/24 05:05:06
(permalink)
|
scook
Forum Host
- Total Posts : 24146
- Joined: 2005/07/27 13:43:57
- Location: TX
- Status: offline
Re: I cant select any Input in the audio track. Please help!!! I'm New!!!
2015/12/24 11:18:19
(permalink)
I cannot tell if this is a hardware problem. If it is here are the hardware setup instructions for SONAR Platinum https://www.cakewalk.com/...roduct=SONAR+Platinum. If you have a different version of SONAR, adjust the dropdown at the top of the page. Or a SONAR track view display issue. If this is the problem, by default the dropdown in the image below will show inputs when All, Custom or I/O is selected. 
|
SimpleM
Max Output Level: -86 dBFS
- Total Posts : 203
- Joined: 2007/07/30 22:14:00
- Location: Greensboro, NC
- Status: offline
Re: I cant select any Input in the audio track. Please help!!! I'm New!!!
2015/12/24 11:40:22
(permalink)
Check in your "preferences" "Audio Device" top tab and make sure your card is selected in the tick boxes. If it disappeared once, Sonar may have not re-enabled it as an available device automatically, you may have to re-enable it manually.
|
Starise
Max Output Level: -0.3 dBFS
- Total Posts : 7563
- Joined: 2007/04/07 17:23:02
- Status: offline
Re: I cant select any Input in the audio track. Please help!!! I'm New!!!
2015/12/24 11:53:01
(permalink)
See the picture scook posted? See the grey master tab at the bottom? See the grey box above it? Click on the arrow in that box. You should see all of your available inputs. Do you see the Tascam? Select the input you want. Now when you arm that track to record you should see audio when you play or sing into that track.
I realize this is a simple explanation, but I think you might not be an english speaker.
Intel 5820K O.C. 4.4ghz, ASRock Extreme 4 LGA 2011-v3, 16 gig DDR4, , 3 x Samsung SATA III 500gb SSD, 2X 1 Samsung 1tb 7200rpm outboard, Win 10 64bit, Laptop HP Omen i7 16gb 2/sdd with Focusrite interface. CbB, Studio One 4 Pro, Mixcraft 8, Ableton Live 10 www.soundcloud.com/starise Twitter @Rodein
|
Snehankur
Max Output Level: -80 dBFS
- Total Posts : 507
- Joined: 2014/11/26 00:19:19
- Status: offline
Re: I cant select any Input in the audio track. Please help!!! I'm New!!!
2015/12/24 20:39:02
(permalink)
One from here should be online at the same time when you are online to guide you through..
|
frkfir
Max Output Level: -90 dBFS
- Total Posts : 34
- Joined: 2015/12/22 12:20:51
- Status: offline
Re: I cant select any Input in the audio track. Please help!!! I'm New!!!
2016/01/06 04:03:53
(permalink)
Thanks!,
The problem was that "Playback timing master" marked as NONE, so I set it to my audio card.
But now there is another issue,
Every time I plugged in my audio interface and open Sonar, for the first time I get this massege:
[image]C:\Users\AdminNayad\Desktop\תיקיה חדשה[/image]"There are no audio devices for the current driver model on your system..."
and I need alwayes to restart my computer when the audio card is connected to thw computer, and only then it will work.
Why is that???
Thanks!!!
|
Bristol_Jonesey
Max Output Level: 0 dBFS
- Total Posts : 16775
- Joined: 2007/10/08 15:41:17
- Location: Bristol, UK
- Status: offline
Re: I cant select any Input in the audio track. Please help!!! I'm New!!!
2016/01/06 04:10:48
(permalink)
You could well benefit by switching on your interface FIRST before starting your computer
CbB, Platinum, 64 bit throughoutCustom built i7 3930, 32Gb RAM, 2 x 1Tb Internal HDD, 1 x 1TB system SSD (Win 7), 1 x 500Gb system SSD (Win 10), 2 x 1Tb External HDD's, Dual boot Win 7 & Win 10 64 Bit, Saffire Pro 26, ISA One, Adam P11A,
|
frkfir
Max Output Level: -90 dBFS
- Total Posts : 34
- Joined: 2015/12/22 12:20:51
- Status: offline
Re: I cant select any Input in the audio track. Please help!!! I'm New!!!
2016/01/06 04:12:26
(permalink)
What???
I dont understand!!!
|
Bristol_Jonesey
Max Output Level: 0 dBFS
- Total Posts : 16775
- Joined: 2007/10/08 15:41:17
- Location: Bristol, UK
- Status: offline
Re: I cant select any Input in the audio track. Please help!!! I'm New!!!
2016/01/06 05:47:01
(permalink)
Switch on your Tascam and let it do it's thing before you switch on your computer.
this way, Sonar will be able to "see" it when it starts looking for it.
CbB, Platinum, 64 bit throughoutCustom built i7 3930, 32Gb RAM, 2 x 1Tb Internal HDD, 1 x 1TB system SSD (Win 7), 1 x 500Gb system SSD (Win 10), 2 x 1Tb External HDD's, Dual boot Win 7 & Win 10 64 Bit, Saffire Pro 26, ISA One, Adam P11A,
|
frkfir
Max Output Level: -90 dBFS
- Total Posts : 34
- Joined: 2015/12/22 12:20:51
- Status: offline
Re: I cant select any Input in the audio track. Please help!!! I'm New!!!
2016/01/06 06:15:14
(permalink)
But I dont have ant "switch on/off" on my audio interface.
I plugget it with USB.
|