drjenk
Max Output Level: -87 dBFS
- Total Posts : 187
- Joined: 2004/12/29 21:06:06
- Status: offline
If you use Zoom R24 64-bit ASIO drivers, DO NOT install the latest X1a update (fixed!)
This is a bit surprising, due to the complete lack of QA that accompanied this latest update, but I just got off the phone with cakewalk support. They confirm that there is a serious issue with the latest update, and the only remedy is to install the original version. You cannot downgrade from X1a to X1. Basically the problem is that sonar cannot find your ASIO device. I am using a zoom r24, and that is my only option to interface to it. So if you use asio, especially if you use a zoom r24 as your interface, I would advise you do NOT install this until they get the issue rectified with another patch. Cheers, David J.
post edited by drjenk - 2010/12/23 00:25:42
|
CJaysMusic
Max Output Level: 0 dBFS
- Total Posts : 30423
- Joined: 2006/10/28 01:51:41
- Location: Miami - Fort Lauderdale - Davie
- Status: offline
Re:If you use ASIO drivers, DO NOT install the latest X1a update
2010/12/21 20:03:30
(permalink)
Um, I use ASIO and ive been using SonarX1 with the new update for 16 hours straight with no issues. Cj
post edited by CJaysMusic - 2010/12/21 20:05:22
|
drjenk
Max Output Level: -87 dBFS
- Total Posts : 187
- Joined: 2004/12/29 21:06:06
- Status: offline
Re:If you use ASIO drivers, DO NOT install the latest X1a update
2010/12/21 20:06:24
(permalink)
Just to re-iterate, this is straight from the support persons mouth. He said there was an issue with ASIO, and it "is obviously an impacting issue". Obviously it does not affect everyone using ASIO, since you are OK. I'm just trying to save anyone else my headache, as the only way to fix it, again straight from him, is to reinstall the original version.
So go ahead and take your chances, just a fair warning.
|
CJaysMusic
Max Output Level: 0 dBFS
- Total Posts : 30423
- Joined: 2006/10/28 01:51:41
- Location: Miami - Fort Lauderdale - Davie
- Status: offline
Re:If you use ASIO drivers, DO NOT install the latest X1a update
2010/12/21 20:07:39
(permalink)
|
Fernando
Max Output Level: -88 dBFS
- Total Posts : 135
- Joined: 2003/11/13 11:09:31
- Location: Ontario, Canada
- Status: offline
Re:If you use ASIO drivers, DO NOT install the latest X1a update
2010/12/21 20:08:48
(permalink)
drjenk
This is a bit surprising, due to the complete lack of QA that accompanied this latest update, but I just got off the phone with cakewalk support. They confirm that there is a serious issue with the latest update, and the only remedy is to install the original version. You cannot downgrade from X1a to X1. Basically the problem is that sonar cannot find your ASIO device. I am using a zoom r24, and that is my only option to interface to it.
So if you use asio, especially if you use a zoom r24 as your interface, I would advise you do NOT install this until they get the issue rectified with another patch.
Cheers,
David J.
Why is Cakewalk not announcing this issue themselves?
|
Rasure
Max Output Level: -79 dBFS
- Total Posts : 584
- Joined: 2007/02/06 06:26:21
- Location: UK
- Status: offline
Re:If you use ASIO drivers, DO NOT install the latest X1a update
2010/12/21 20:09:21
(permalink)
ASIO fine here too with X1a:-)
|
John T
Max Output Level: -7.5 dBFS
- Total Posts : 6783
- Joined: 2006/06/12 10:24:39
- Status: offline
Re:If you use ASIO drivers, DO NOT install the latest X1a update
2010/12/21 20:10:34
(permalink)
I installed today and ran the x1a patch, and everything is fine on ASIO for me too.
http://johntatlockaudio.com/Self-build PC // 16GB RAM // i7 3770k @ 3.5 Ghz // Nofan 0dB cooler // ASUS P8-Z77 V Pro motherboard // Intel x-25m SSD System Drive // Seagate RAID Array Audio Drive // Windows 10 64 bit // Sonar Platinum (64 bit) // Sonar VS-700 // M-Audio Keystation Pro 88 // KRK RP-6 Monitors // and a bunch of other stuff
|
Dave Modisette
Max Output Level: 0 dBFS
- Total Posts : 11050
- Joined: 2003/11/13 22:12:55
- Location: Brandon, Florida
- Status: offline
Re:If you use ASIO drivers, DO NOT install the latest X1a update
2010/12/21 20:13:46
(permalink)
Fernando
drjenk
This is a bit surprising, due to the complete lack of QA that accompanied this latest update, but I just got off the phone with cakewalk support. They confirm that there is a serious issue with the latest update, and the only remedy is to install the original version. You cannot downgrade from X1a to X1. Basically the problem is that sonar cannot find your ASIO device. I am using a zoom r24, and that is my only option to interface to it.
So if you use asio, especially if you use a zoom r24 as your interface, I would advise you do NOT install this until they get the issue rectified with another patch.
Cheers,
David J.
Why is Cakewalk not announcing this issue themselves?
Seems to be by a case by case basis. Me, I've had it appear twice and after a close and restart, X1a picks up the device just fine. Frontier Dakota 64 bit ASIO driver.
post edited by Mod Bod - 2010/12/21 22:38:05
|
mudgel
Max Output Level: 0 dBFS
- Total Posts : 12010
- Joined: 2004/08/13 00:56:05
- Location: Linton Victoria (Near Ballarat)
- Status: offline
Re:If you use ASIO drivers, DO NOT install the latest X1a update
2010/12/21 20:17:43
(permalink)
Not using ASIO but X1a is as dead as a dodo. No audio engine or transport.
Exactly the same settings I used in X1. SONAR 8.3, 8.5 32 & 64 bit all work fine. and X1 worked fine with the settings copied over during install. X1a no workee - despite trying everything - its like its not connected to the audio driver at all.
Mike V. (MUDGEL) STUDIO: Win 10 Pro x64, SPlat & CbB x64, PC: ASUS Z370-A, INTEL i7 8700k, 32GIG DDR4 2400, OC 4.7Ghz. Storage: 7 TB SATA III, 750GiG SSD & Samsung 500 Gig 960 EVO NVMe M.2. Monitors: Adam A7X, JBL 10” Sub. Audio I/O & DSP Server: DIGIGRID IOS & IOX. Screen: Raven MTi + 43" HD 4K TV Monitor. Keyboard Controller: Native Instruments Komplete Kontrol S88.
|
koolbass
Max Output Level: -73 dBFS
- Total Posts : 853
- Joined: 2003/11/13 23:27:43
- Location: Nashville, TN
- Status: offline
Re:If you use ASIO drivers, DO NOT install the latest X1a update
2010/12/21 20:25:56
(permalink)
ASIO with RME interface is working just fine here
Cheers, Lance "koolbass" Martin Sonar Platinum, Sound Forge Pro 12, ADK built audio computer: Intel 8 core i7 Haswell-E overclocked 4.2GHz; 32 Gig DDR4/2666 ram; Corsair 850W power; Windows Pro 10 x64; Geforce GTX 980 video w/4 monitors (Acer 27" touch screen/primary); 3 Seagate drives - OS, audio, samples, 2 TB external USB3 bkup drive; RME MADIface XT; Ferrofish A16 MKII ADDA; Lucid GenX 6-96 clock www.BoogieHouseMusic.com
|
Garry Stubbs
Max Output Level: -49 dBFS
- Total Posts : 2619
- Joined: 2008/02/18 17:34:48
- Location: Castlethorpe, UK
- Status: offline
Re:If you use ASIO drivers, DO NOT install the latest X1a update
2010/12/21 20:36:41
(permalink)
Upgraded to X1a early evening, been tracking all night for a coffee house project.
ASIO 64-bit driver for my SPS-66 interface, no issues at all
https://soundcloud.com/garry-kiosk Sonar Platinum 64-bit: Q6600 8Gb Win7 64-bit: KRK Monitors: ART MPA PRO VLA ii preamp: 3 x 500Gb internal SATA disks: Superior Drummer2: GPO4: Realstrat: Saxlab: Rapture: Dimension Pro: Ozone 4: Edirol SPS-660: PCR-500 MIDI controller: Korg PadKontrol: Fender / Gibson / Yamaha / Ibanez guitars:Guitar Rig 5: Dual 22" Monitors: Mapex Drums, Sabian AAX cymbals: Alesis DM5 Pro Kit: SE Electronics and Shure Mics: Mathmos Lava Lamp (40W)
|
bitman
Max Output Level: -34 dBFS
- Total Posts : 4105
- Joined: 2003/11/06 14:11:54
- Location: Keystone Colorado
- Status: offline
Re:If you use ASIO drivers, DO NOT install the latest X1a update
2010/12/21 20:36:54
(permalink)
I tried ASIO4All today and it ok here.
|
jimkleban
Max Output Level: -64 dBFS
- Total Posts : 1319
- Joined: 2008/11/09 09:42:45
- Status: offline
Re:If you use ASIO drivers, DO NOT install the latest X1a update
2010/12/21 20:38:34
(permalink)
I just installed X1A and my ASIO drivers were picked up fine (x64) on the ECHO 3G audio interface. I hope I don't start having problems... X1 has worked flawlessly for me (don't want to JINX it though).
Jim
The Lamb Laid Down on MIDI www.lldom.com Studio Cat Custom i7 with Thunderbolt (wonderful system built and configured by our own Jim R) Apollo Duo (via TB) UAD Quad UAD Duo WIN 8.1 x64 with 32 GB Ram 4 SSD for programs and sample libraries Splat (latest version)
|
Twigman
Max Output Level: -38.5 dBFS
- Total Posts : 3667
- Joined: 2006/08/24 04:45:15
- Location: United Kingdom of Great Britain & Northern Ireland
- Status: offline
Re:If you use ASIO drivers, DO NOT install the latest X1a update
2010/12/21 20:43:21
(permalink)
ASIO with RME HDSP9632 working fine here on X1A
|
pathos
Max Output Level: -84 dBFS
- Total Posts : 331
- Joined: 2010/12/08 20:22:37
- Status: offline
Re:If you use ASIO drivers, DO NOT install the latest X1a update
2010/12/21 20:51:50
(permalink)
No problems running it here at all.
|
soundtweaker
Max Output Level: -70 dBFS
- Total Posts : 1036
- Joined: 2003/11/12 12:25:59
- Location: San Francisco
- Status: offline
Re:If you use ASIO drivers, DO NOT install the latest X1a update
2010/12/21 20:54:14
(permalink)
No problems with ASIO and Layla 24
|
Rimshot
Max Output Level: -29 dBFS
- Total Posts : 4625
- Joined: 2010/12/09 12:51:08
- Location: California
- Status: offline
Re:If you use ASIO drivers, DO NOT install the latest X1a update
2010/12/21 20:54:53
(permalink)
I have updated another post also. I too use a Zoom R24 with 64 bit drivers on Windows 7 64 and the all was good with 8.5.3 and X1. X1A does not see my Zoom drivers. Did reboot, reinstall, created new aud.ini file. No fix. Just wanted to chime in. I sent in a problem report this morning.
|
StepD
Max Output Level: -79 dBFS
- Total Posts : 594
- Joined: 2003/11/08 01:03:52
- Status: offline
Re:If you use ASIO drivers, DO NOT install the latest X1a update
2010/12/21 20:55:03
(permalink)
AudioFire 4 with ASIO working fine here.
Core2 6600 2.40 GHz, ASUS P5B Deluxe, 8GB RAM, GeForce GT 630 2GB, 3 Seagate Sata, Echo AudioFire 4 asio, Windows 10 Pro 64-bit, Sonar Platinum, Cakewalk by Bandlab
|
A1MixMan
Max Output Level: -58 dBFS
- Total Posts : 1706
- Joined: 2003/11/19 16:15:11
- Location: SunriseStudios
- Status: offline
Re:If you use ASIO drivers, DO NOT install the latest X1a update
2010/12/21 20:58:52
(permalink)
koolbass
ASIO with RME interface is working just fine here
Hey koolbass, that wouldn't happen to be the RME Multiface II would it?
|
emwhy
Max Output Level: -62 dBFS
- Total Posts : 1402
- Joined: 2006/01/03 15:09:02
- Status: offline
Re:If you use ASIO drivers, DO NOT install the latest X1a update
2010/12/21 21:10:13
(permalink)
Edirol UA 101 and M Audio 2496 working fine here under ASIO. Just did a two hour project without a hitch in X1 64 bit. Loving it now that they got Pro Channel working.
|
StarTekh
Max Output Level: -55 dBFS
- Total Posts : 2007
- Joined: 2004/03/09 12:02:20
- Location: Montreal
- Status: offline
Re:If you use ASIO drivers, DO NOT install the latest X1a update
2010/12/21 21:10:15
(permalink)
> drjenk . please edit the post.. its not everyone... 
|
DeveryH
Max Output Level: -75 dBFS
- Total Posts : 780
- Joined: 2004/12/01 21:27:43
- Status: offline
Re:If you use ASIO drivers, DO NOT install the latest X1a update
2010/12/21 21:14:20
(permalink)
StarTekh
> drjenk . please edit the post.. its not everyone...
Can you edit thread titles after the fact?
|
Scott Lee
Max Output Level: -68 dBFS
- Total Posts : 1120
- Joined: 2003/11/13 23:13:38
- Location: Hollywood, California
- Status: offline
Re:If you use ASIO drivers, DO NOT install the latest X1a update
2010/12/21 21:14:50
(permalink)
Using a Motu 1224 with ASIO drivers at 1.5ms here no problems at all. I believe its only effecting "certain" hardware devices using ASIO, again not across the board.
|
Guitarpima
Max Output Level: -34 dBFS
- Total Posts : 4125
- Joined: 2005/11/19 23:53:59
- Location: Terra 3
- Status: offline
Re:If you use ASIO drivers, DO NOT install the latest X1a update
2010/12/21 21:19:23
(permalink)
No problems here. Everything works great.
Notation, the original DAW. Everything else is just rote. We are who we are and no more than another. Humans, you people are crazy. Win 7 x64 X2 Intel DX58SO, Intel i7 920 2.66ghz 12gb DDR3 ASUS ATI EAH5750 650w PSU 4x WD HDs 320gb DVD, DVD RW Eleven Rack, KRK Rokit 8s and 10s sub
|
snookerc
Max Output Level: -84 dBFS
- Total Posts : 312
- Joined: 2005/08/22 22:45:07
- Location: Iowa (USA)
- Status: offline
Re:If you use ASIO drivers, DO NOT install the latest X1a update
2010/12/21 21:21:52
(permalink)
Been using ASIO with my TC Electronic Konnekt24D for hours, no issues here!
Chris Snook (Computer playing guitar programmer) _______________________________________ Sonar Platinum Windows 10 x64 AMD Phenom II X6 2.8GHz Saffire 40 Pro 8GB RAM Alesis QS8.1 controller kb
|
wingnut1
Max Output Level: -90 dBFS
- Total Posts : 39
- Joined: 2005/05/31 12:20:13
- Status: offline
Re:If you use ASIO drivers, DO NOT install the latest X1a update
2010/12/21 21:23:09
(permalink)
Using PreSonus Firepod with 64 bit ASIO driver for Windows 7 and it's working fine.
|
StarTekh
Max Output Level: -55 dBFS
- Total Posts : 2007
- Joined: 2004/03/09 12:02:20
- Location: Montreal
- Status: offline
Re:If you use ASIO drivers, DO NOT install the latest X1a update
2010/12/21 21:29:13
(permalink)
> I never tryd.. i over posted on another thread and cant
> edit it that easy.. jon
|
Kado
Max Output Level: -90 dBFS
- Total Posts : 12
- Joined: 2007/03/14 14:15:12
- Status: offline
Re:If you use ASIO drivers, DO NOT install the latest X1a update
2010/12/21 21:34:22
(permalink)
ASIO works fine for me, I think the only people having problems with X1A & ASIO drivers are Lynx and Zoom users.
|
Crg
Max Output Level: 0 dBFS
- Total Posts : 7719
- Joined: 2007/11/15 07:59:17
- Status: offline
Re:If you use ASIO drivers, DO NOT install the latest X1a update
2010/12/21 21:50:46
(permalink)
Rimshot
I have updated another post also. I too use a Zoom R24 with 64 bit drivers on Windows 7 64 and the all was good with 8.5.3 and X1. X1A does not see my Zoom drivers. Did reboot, reinstall, created new aud.ini file. No fix. Just wanted to chime in. I sent in a problem report this morning.
Hmmm, I'm beginning to see a pattern.
|
perfectprint
Max Output Level: -73 dBFS
- Total Posts : 862
- Joined: 2010/01/02 02:21:12
- Status: offline
Re:If you use ASIO drivers, DO NOT install the latest X1a update
2010/12/21 21:52:21
(permalink)
focusrite 6 usb recognized and working
|