Installation of the 2nd VS-700R and SONAR 8.5 PE recognition

Author
Post
Essentials Only Full Version
pizu145
Max Output Level: -90 dBFS
  • Total Posts : 4
  • Joined: 2011/05/18 13:59:07
  • Location: Malta
  • Status: offline
2011/05/18 14:07:34 (permalink)

Installation of the 2nd VS-700R and SONAR 8.5 PE recognition

Hi all, I have just installed through the normal procedures as instructed in the manual the 2nd VS700R to my already installed and working VS700C and the 1st VS700R.

The stand alone modules of the I/O together with the Device Manager shows that there is a second interface, however when selecting the input from Sonar 8.5 PE, the second 700R unit is not shown. I am using a Vista 64 bit system. Can some one help me to identify what I am missing please to have the channels of the second unit recognised in SONAR please?

regards
Noel
#1

7 Replies Related Threads
    stratrat1
    Max Output Level: -86 dBFS
    • Total Posts : 212
    • Joined: 2010/03/23 11:47:44
    • Status: offline
    Re:Installation of the 2nd VS-700R and SONAR 8.5 PE recognition 2011/05/18 23:42:17 (permalink)
    Check your audio drivers in tools, options , audio...and see if you have in the input drivers for the second 700r selected... We can work from there :-)
    post edited by stratrat1 - 2011/05/18 23:43:34


    Sonar Platinum
    windows 10 64bit
    Intel i7 Quad 950
    Asus p6t 
    24 gigs DDR3 1333
    3 250 gig SSD
    VS-700C
    Soundcraft COMPACT 24 for pres and converters....
    #2
    pizu145
    Max Output Level: -90 dBFS
    • Total Posts : 4
    • Joined: 2011/05/18 13:59:07
    • Location: Malta
    • Status: offline
    Re:Installation of the 2nd VS-700R and SONAR 8.5 PE recognition 2011/05/19 05:43:26 (permalink)
    Hi, thanks for this. I did check but it is not shown, however it is recognised in the I/0 editors as 2 separate interfaces. Thanks, Noel
    #3
    Dyonight
    Max Output Level: -80 dBFS
    • Total Posts : 529
    • Joined: 2009/02/02 13:28:52
    • Status: offline
    Re:Installation of the 2nd VS-700R and SONAR 8.5 PE recognition 2011/05/19 07:59:27 (permalink)
    When you installed Sonar, did you check the "editor for a second vs-700r" or something like this, at the very bottom of the list?

    If your not shure, insert the Sonar 8.5 cd, run it, choose costum installation and uncheck everything but the box concerning the second I/O.
    #4
    Crg
    Max Output Level: 0 dBFS
    • Total Posts : 7719
    • Joined: 2007/11/15 07:59:17
    • Status: offline
    Re:Installation of the 2nd VS-700R and SONAR 8.5 PE recognition 2011/05/19 08:44:44 (permalink)
    Do you have it hooked up via ADAT or USB? Obvious question but if you have it hooked up ADAT, you'll be looking for your ADAT inputs.

    Craig DuBuc
    #5
    Ryan Munnis [Cakewalk]
    Administrator
    • Total Posts : 1067
    • Joined: 2009/11/01 10:28:44
    • Status: offline
    Re:Installation of the 2nd VS-700R and SONAR 8.5 PE recognition 2011/05/20 10:13:39 (permalink)
    Hi Noel,

    Make sure you have SONAR's driver mode set to "ASIO" and not "WDM/KS" or other. This configuration only works in ASIO driver mode. In SONAR 8.5 and earlier this setting is found under Options | Audio | Advanced.

    Aside from that, make sure you have configured the DIP switches in your second VS-700R correctly.

    More information on setting this up can be found on page 166 of the VS-700 Owners Manual here: http://www.cakewalk.com/s...-700_Owners_Manual.pdf

    Best regards,

    Ryan Munnis
    Cakewalk
    #6
    pizu145
    Max Output Level: -90 dBFS
    • Total Posts : 4
    • Joined: 2011/05/18 13:59:07
    • Location: Malta
    • Status: offline
    Re:Installation of the 2nd VS-700R and SONAR 8.5 PE recognition 2011/06/01 07:36:57 (permalink)
    Hi Ryan, thanks for this. When I selected the ASIO driver as instructed, the input drivers could be seen in the drivers window but couldnt select them. Can you help me please?

    regards
    Noel
    #7
    pizu145
    Max Output Level: -90 dBFS
    • Total Posts : 4
    • Joined: 2011/05/18 13:59:07
    • Location: Malta
    • Status: offline
    Re:Installation of the 2nd VS-700R and SONAR 8.5 PE recognition 2011/06/03 09:23:14 (permalink)
    Hi Ryan, I have noticed that an M-Audio Audiophile 192 was creating this conflict and disabled it. Hence the two VS-700Rs are now recognised. However, while running Sonar, can I run Quantum Leap Symphonic Orchestra and get a separate output to have it as an audio instrument in Sonar please?

    Thanks for your patience.

    Noel
    #8
    Jump to:
    © 2024 APG vNext Commercial Version 5.1