Acclimate12
Max Output Level: -90 dBFS
- Total Posts : 23
- Joined: 2015/01/22 00:54:53
- Status: offline
Installed Platinum and no Boz Bark Off Channel or ReMatrix Solo
Hi Everyone
I've just installed Platinum and neither the Boz Pro Channel nor ReMatrix Solo Channel is appearing. I have tried resetting the vst plug ins as well as rescanning them. I have found both in the directory: c:\program files\cakewalk\shared utilities\internal.
I've directed the vst scan paths to that directory and still nothing. Any ideas?
|
jih64 
Max Output Level: -75 dBFS
- Total Posts : 797
- Joined: 2014/01/30 20:59:40
- Location: Studio One 3
- Status: offline
Re: Installed Platinum and no Boz Bark Off Channel or ReMatrix Solo
2015/02/28 03:43:57
(permalink)
Are you trying to put them in the Pro Channel ? and not the fx bin ? They are Pro Channel modules.
|
mudgel
Max Output Level: 0 dBFS
- Total Posts : 12010
- Joined: 2004/08/13 00:56:05
- Location: Linton Victoria (Near Ballarat)
- Status: offline
Re: Installed Platinum and no Boz Bark Off Channel or ReMatrix Solo
2015/02/28 03:58:52
(permalink)
Mike V. (MUDGEL) STUDIO: Win 10 Pro x64, SPlat & CbB x64, PC: ASUS Z370-A, INTEL i7 8700k, 32GIG DDR4 2400, OC 4.7Ghz. Storage: 7 TB SATA III, 750GiG SSD & Samsung 500 Gig 960 EVO NVMe M.2. Monitors: Adam A7X, JBL 10” Sub. Audio I/O & DSP Server: DIGIGRID IOS & IOX. Screen: Raven MTi + 43" HD 4K TV Monitor. Keyboard Controller: Native Instruments Komplete Kontrol S88.
|
Acclimate12
Max Output Level: -90 dBFS
- Total Posts : 23
- Joined: 2015/01/22 00:54:53
- Status: offline
Re: Installed Platinum and no Boz Bark Off Channel or ReMatrix Solo
2015/02/28 04:22:40
(permalink)
Yes I realise those are both Pro Channel modules. When I go to the Pro Channel and select insert module neither of those show up as a selection choice
|
sylent
Max Output Level: -84 dBFS
- Total Posts : 309
- Joined: 2013/04/01 16:37:54
- Location: Dallas, Texas
- Status: offline
Re: Installed Platinum and no Boz Bark Off Channel or ReMatrix Solo
2015/02/28 04:58:04
(permalink)
Acclimate12
Yes I realise those are both Pro Channel modules. When I go to the Pro Channel and select insert module neither of those show up as a selection choice
Did you have a previous installation, (X3, X2, etc), on another HDD dir other than c:\? I had a problem before with REmatrix not showing in the menu... it was a registry link issue. 218
http://twisteddrive.comWindows 7 Pro 64, i5-3570k 3.40GHz, 32Gb ram, NVIDIA Quatro 4000, 2x SSD, 2x 2Tb Dedicated storage and misc high-capacity HHD Storage, Sonar Platinum, Adobe CS6 Master Suite, Misc 3D, video, audio software. Focusrite Liquid Saffire 56/octapre, Mackie MCU, other MIDI/control, rack effects, and more.
|
Acclimate12
Max Output Level: -90 dBFS
- Total Posts : 23
- Joined: 2015/01/22 00:54:53
- Status: offline
Re: Installed Platinum and no Boz Bark Off Channel or ReMatrix Solo
2015/02/28 05:05:03
(permalink)
I have X2 and X3 also on c:\. How would I go about sorting the registry link?
|
sylent
Max Output Level: -84 dBFS
- Total Posts : 309
- Joined: 2013/04/01 16:37:54
- Location: Dallas, Texas
- Status: offline
Re: Installed Platinum and no Boz Bark Off Channel or ReMatrix Solo
2015/02/28 05:25:38
(permalink)
Since yours are all installed on C:\ , it must be something else.
I use a multiple drive system and that caused registry errors initially.
231
http://twisteddrive.comWindows 7 Pro 64, i5-3570k 3.40GHz, 32Gb ram, NVIDIA Quatro 4000, 2x SSD, 2x 2Tb Dedicated storage and misc high-capacity HHD Storage, Sonar Platinum, Adobe CS6 Master Suite, Misc 3D, video, audio software. Focusrite Liquid Saffire 56/octapre, Mackie MCU, other MIDI/control, rack effects, and more.
|
subtlearts
Max Output Level: -53.5 dBFS
- Total Posts : 2200
- Joined: 2006/01/10 05:59:21
- Location: Berlin
- Status: offline
Re: Installed Platinum and no Boz Bark Off Channel or ReMatrix Solo
2015/02/28 05:57:34
(permalink)
These are separate installers in the Command Center - under the Sonar category but not installed automatically with the Braintree update. Look at the bottom of the list for the BOZ Digital Labs ProChannel Collection and the NYC Showroom Impulses. I asked the same question in another thread but then managed to figure it out.
|
Acclimate12
Max Output Level: -90 dBFS
- Total Posts : 23
- Joined: 2015/01/22 00:54:53
- Status: offline
Re: Installed Platinum and no Boz Bark Off Channel or ReMatrix Solo
2015/02/28 15:10:40
(permalink)
Yes I have installed those and as I mentioned the files are present in my shared utilities folder. Unfortunately they just do not appear in the Pro Channel
|
John
Forum Host
- Total Posts : 30467
- Joined: 2003/11/06 11:53:17
- Status: offline
Re: Installed Platinum and no Boz Bark Off Channel or ReMatrix Solo
2015/02/28 15:13:44
(permalink)
In Program Manager do a Reset and Rescan.
|
Acclimate12
Max Output Level: -90 dBFS
- Total Posts : 23
- Joined: 2015/01/22 00:54:53
- Status: offline
Re: Installed Platinum and no Boz Bark Off Channel or ReMatrix Solo
2015/02/28 15:57:31
(permalink)
Hi John
I've tried resetting and rescanning several times but no joy. I suppose I will contact support and see what they say about it
|
Acclimate12
Max Output Level: -90 dBFS
- Total Posts : 23
- Joined: 2015/01/22 00:54:53
- Status: offline
Re: Installed Platinum and no Boz Bark Off Channel or ReMatrix Solo
2015/03/05 19:47:19
(permalink)
Update! Cakewalk has told me there is a known migration problem from X3 to Platinum which is being worked on and a fix should be available in the next week or two. In the interim they have suggested I go to Command Center and reinstall Platinum as 32-bit. I have done this and now all of my Pro-Channel Modules (including ReMatrix) are once again working and Melodyne now also shows back up in the region fx. I also had to re-install Bark of Dog as 32-bit, which is now available in my list of modules and working correctly. Until this next update comes out, it appears I am stuck working in 32-bit.
|
Splat
Max Output Level: 0 dBFS
- Total Posts : 8672
- Joined: 2010/12/29 15:28:29
- Location: Mars.
- Status: offline
Re: Installed Platinum and no Boz Bark Off Channel or ReMatrix Solo
2015/03/05 22:59:13
(permalink)
I wonder what the specific migration problem is as many are successful.
Sell by date at 9000 posts. Do not feed. @48/24 & 128 buffers latency is 367 with offset of 38. Sonar Platinum(64 bit),Win 8.1(64 bit),Saffire Pro 40(Firewire),Mix Control = 3.4,Firewire=VIA,Dell Studio XPS 8100(Intel Core i7 CPU 2.93 Ghz/16 Gb),4 x Seagate ST31500341AS (mirrored),GeForce GTX 460,Yamaha DGX-505 keyboard,Roland A-300PRO,Roland SPD-30 V2,FD-8,Triggera Krigg,Shure SM7B,Yamaha HS5.Maschine Studio+Komplete 9 Ultimate+Kontrol Z1.Addictive Keys,Izotope Nectar elements,Overloud Bundle,Geist.Acronis True Image 2014.
|
Acclimate12
Max Output Level: -90 dBFS
- Total Posts : 23
- Joined: 2015/01/22 00:54:53
- Status: offline
Re: Installed Platinum and no Boz Bark Off Channel or ReMatrix Solo
2015/03/05 23:05:56
(permalink)
Yeah not certain. Here's what Cakewalk wrote:
"There is still a known issue with plug-ins when migrating from X3 to Platinum, and is still being worked on. For the time being, you should be able to work around the issue by installing and running the 32-bit version of SONAR. This can coexist with the 64-bit version with no issues. You can find the installer in C:\ProgramData\Cakewalk\Command Center\Downloads. I apologize for any inconvenience this may cause".
I am happy to at least be able to use Platinum now, even if it's only as 32-bit!
|