Just imported audio files - can't hear

Author
Post
Essentials Only Full Version
Mike3825
Max Output Level: -90 dBFS
  • Total Posts : 18
  • Joined: 2010/06/29 22:25:17
  • Status: offline
2010/06/30 00:25:04 (permalink)

Just imported audio files - can't hear

I just imported 4 audio files into MC5. I can see the audio file, and when I hit play i see the vu meter moving -  but no sound. Sound card sent to speakers. I loded a midi file and could hear the tracks. Any suggestions.
 
Thanks Milwaukee Mike
#1

3 Replies Related Threads
    grenas252
    Max Output Level: -90 dBFS
    • Total Posts : 1
    • Joined: 2010/06/30 01:23:04
    • Status: offline
    Re:Just imported audio files - can't hear 2010/06/30 01:29:46 (permalink)
    I am having the same problem. I installed the music creator 5, search the audio like the book says, then I imported the files and the line moves but no audio. It says I have audio, when I listen with the other music programs it work, but can not figure out how to fix this? Can anyone help?
    #2
    Kalle Rantaaho
    Max Output Level: -5 dBFS
    • Total Posts : 7005
    • Joined: 2006/01/09 13:07:59
    • Location: Finland
    • Status: offline
    Re:Just imported audio files - can't hear 2010/06/30 07:14:26 (permalink)
    Is your soundcard recognised by MC and selected (>check in options dialogue)?
    What is the output of the audio track set to? What soundcard and driver mode are you using?
    What OS are you using (>check the settings of the windows mixer)?

    SONAR PE 8.5.3, Asus P5B, 2,4 Ghz Dual Core, 4 Gb RAM, GF 7300, EMU 1820, Bluetube Pre  -  Kontakt4, Ozone, Addictive Drums, PSP Mixpack2, Melda Creative Pack, Melodyne Plugin etc.
    The benefit of being a middle aged amateur is the low number of years of frustration ahead of you.
    #3
    Guitarhacker
    Max Output Level: 0 dBFS
    • Total Posts : 24398
    • Joined: 2007/12/07 12:51:18
    • Location: NC
    • Status: offline
    Re:Just imported audio files - can't hear 2010/06/30 08:12:44 (permalink)
    If you're using the built in sound card......for a lappy.... be sure the driver is set to MME... run the WAVE PROFILER and set the inputs and outputs for audio to the lappy's default sound card.....

    then try it again.... getting sound from a wave file that you can see is simply a matter of getting the signal path "connected" correctly.

    My website & music: www.herbhartley.com

    MC4/5/6/X1e.c, on a Custom DAW   
    Focusrite Firewire Saffire Interface


    BMI/NSAI

    "Just as the blade chooses the warrior, so too, the song chooses the writer " 
    #4
    Jump to:
    © 2024 APG vNext Commercial Version 5.1